Flash U-Boot

Instruction on you flash uboot straight into your device. This is the way how to install U-Boot if the recommended way fails. (recommended way)

You must be using the PR1.3 kernel and nothing else. You will likely end up in a reboot loop if you don't have this otherwise. You need dpkg tool to use this.

1. Download 'uboot-pr13_*_armel.deb' from http://repository.maemo.org/extras-devel/pool/fremantle-1.3/free/u/uboot-pr13/
2. unpack deb: "dpkg -X uboot-pr13_1.0.2_armel.deb uboot-pr13"
3. flash to device: "sudo flasher-3.5 -f -F temp/boot/uboot-and-zImage-2.6.28-20103103+0m5.fiasco"

WARNING: You have to use PR 1.3 version of Fremantle and nothing else