Meego Wiki
Views

ARM/Snowball

From MeeGo wiki
(Difference between revisions)
Jump to: navigation, search
(→Introduction)
(→Introduction)
Line 6: Line 6:
** The product development version (PDK, 8GBytes e-MMC - '''also usable in end products''').
** The product development version (PDK, 8GBytes e-MMC - '''also usable in end products''').
** Snowball is sold by [http://www.stericsson.com/contacts/distributors.jsp distributors] with pricing recommendation.  
** Snowball is sold by [http://www.stericsson.com/contacts/distributors.jsp distributors] with pricing recommendation.  
-
* [http://www.igloocommunity.org/news/ News]
+
* [http://www.igloocommunity.org/news/ News], [http://igloocommunity.org/support/Mailinglists Mailinglists]
== Specifications ==
== Specifications ==

Revision as of 03:09, 6 July 2011

Introduction

  • Snowball is a powerful board with ST-Ericsson’s Nova A9500 processor (ARM dual-core Cortex A9 @ 1GHz) and the ARM Mali 400 GPU.
  • ST-Ericsson offers MeeGo (with hardfp support), Android and Ubuntu releases for Snowball, and provides support for both hobbyist and professional users of the Snowball board.
  • Two versions of the Snowball developer board are sold by Calao Systems and ST-Ericsson's worldwide network of distributors:
    • The software development version (SDK, 4GBytes e-MMC)
    • The product development version (PDK, 8GBytes e-MMC - also usable in end products).
    • Snowball is sold by distributors with pricing recommendation.
  • News, Mailinglists

Specifications

    • ARM Dual Cortex A9 @ 1GHz
    • 4/8 GByte e-MMC
    • 1 GByte LP-DDR2
    • 1 x Micro-SD
    • 1 x RTC Battery Backup
    • 1 x HDMI Full HD
    • 1 x Ethernet 10/100 Mbits
    • 1 x CVBS Video OUT
    • 1 x Audio OUT
    • 1 x Audio IN
    • 1 x USB OTG Hi-Speed (480 Mbits)
    • 1 x Li-Ion Battery Charger
    • 1 x Serial Port (RS232 / Over USB)
    • 1 x JTAG Connector
    • 1 x MiPi34 Debug Connector
    • 1 x IEEE 802.11 b/g/n WLAN
    • 1 x Bluetooth 2.1 + EDR (Ex.Antenna)
    • 1 x GPS (Ex. Antenna)
    • 1 x 3 Axis Accelerometer
    • 1 x 3 Axis Magnetometer
    • 1 x 3 Axis Gyrometer
    • 1 x Pressure sensor
    • 3 x Expansion Connectors:
      • 1 x 16 pins Top Connector (I2C, SPI, UART, GPIO)
      • 1 x 60 pins Top Connector (I2C, SPI, UART, HSI, FSMC, GPIO)
      • 1 x 120 pins Bottom Connector (LCD, DSI, Camera, CSI, Audio, FSMC)
    • Bootloader: U-Boot (plans are to port Barebox to it for faster boot time)
    • Board Size / Weight: 85 x 85 mm / 62 grs
    • Power Supply: +5VDC via Jack 3.5mm or USB OTG
    • Power Requirement: 250mA Max / Low power mode
Retrieved from "http://wiki.meego.com/ARM/Snowball"
Personal tools