Views

ARM/TEGRA2

From MeeGo wiki

< ARM

Revision as of 00:55, 3 March 2011 by Vgrade (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

This area is under construction - This page is for shared development purposes nothing is guaranteed to work

1 Tegra 2 hardware adaptation

Tegra 2 hardware adaptation

This page was created to document the port of MeeGo to Tegra 2.

This port is a work in progress and not meant for end user installation. The following details are for Tegra 2 porting effort and no end user images are available at this time.

This port has been enabled by the outstanding contribution of Stskeeps and others in progressing the ARM hardfp build.

Building a MeeGo hardfp Image

These are just my lab notes I took while building the hardfp image and rely on repos on the meego OBS not on repo.meego so things are not guaranteed to work when those change or are removed. I guess hardfp repos will be on repo.meego in future.

http://download.meego.com/live/devel:/hardfp:/base/standard/armv7hl/
http://download.meego.com/live/devel:/hardfp:/testrun/standard/armv7hl/
mic 0.24.1 from git
http://bugs.meego.com/show_bug.cgi?id=11467
http://www.mail-archive.com/meego-dev@meego.com/msg06350.html --force-overwrite, bug fix for ubuntu 10.04
sudo mic-image-creator --run-mode=0 --cache=../mycachedir --format=loop  --release=daily --compress-disk-image=none --config=meego-handset-armv7hl-tegra-1.1.80.13.20110105.1.ks --arch=armv7hl - http://wordpress.pastebin.com/phdwDJZ9
sudo mount -o loop meego-handset-armv7hl-tegra-daily.img /mnt
sudo rsync -aHx mnt/* /media/xxx
http://pastebin.com/TqKWx455

Alternative raw image recommended by Stskeeps

kickstart - http://wordpress.pastebin.com/MVfQjyek
sudo mic-image-creator --run-mode=0 --cache=../mycachedir --format=raw  --release=daily --compress-disk-image=none --config=meego-handset-armv7hl-tegra.ks --arch=armv7hl
sudo dd bs=4096 if=meego-handset-armv7hl-tegra-daily-mmcblk3p.raw of=/dev/sdb

Advent Vega

Initial Bring Up

http://bug10738.openaos.org/images/tegra2/

Viewsonic G Tablet

Entering Nvidia APX Mode

Accessing the Nvidia Recovery Mode can be accomplished by holding the - volume key and pressing power. No output will be visible but the device will show up in lsusb (on Linux) and nvflash will function.

http://forum.xda-developers.com/archive/index.php/t-827384.html

You will need the bootloader found on the tegratab wiki as the stock one found in the Nvidia package will cause strange behavior and transfer failures:

http://wiki.tegratab.com/index.php/Clockwork_Recovery