Meego Wiki
Views

Hardware-accelerated graphics on Pandaboard using MeeGo

From MeeGo wiki
Revision as of 23:09, 12 May 2011 by Qgil (Talk | contribs)
Jump to: navigation, search

Contents

Demo of MeeGo Handset UX running alongside OGLES2 "Coverflow" demo on OMAP4 Pandaboard

Watch the one-minute video showing 3D hardware acceleration.

Summary

The video shows the OGLES "Coverflow" demo from Imagination Technologies running on the SGX540 GPU which is part of the OMAP 4430 processor that powers the Pandaboard. Coverflow requires 3D hardware acceleration, so the video shows that the PVR closed-source drivers from Imagination and TI's open source Xorg shared-object libraries work with the MeeGo userland. Just to show that the platform really is MeeGo, I'm running the Handset UX's duihome alongside the graphics demo. OpenVG, the 2D hardware-accelerated graphics suite, also works fine on Panda-MeeGo.

Major references

Details

The demo uses the kernel and drivers from the OMAP 4 image of Ubuntu 10.10. The Ubuntu image is installed on a microSD card using TI's excellent instructions. Don't forget to follow the Installing OMAP4 Addons Graphically instructions; they're the whole point of bothering with Ubuntu in the first place! The Addons package provides the drivers for both the PowerVR SGX540 GPU and the WLAN, which is handy.

MeeGo was built using this kickstart file and the 1.1.80 snapshot (just because I had that image lying around the disk) and installed on a generic Kingston 16 GB USB stick using standard methods: 

[alison@bonnet]$ dmesg| grep sd
[789217.011903]$ sd 33:0:0:0: [sdc] Attached SCSI removable disk
[alison@bonnet]$ mkdir -p /media/meego_usb
[alison@bonnet]$ sudo umount /media/meego_usb
[alison@bonnet]$ sudo mkfs.ext3 -L meego_usb /dev/sdc1
[alison@bonnet]$ sudo cp -rfp meego-panda-rootfs-morepkgs/* /media/meego_usb
[alison@bonnet]$ sudo mount -t ext3 /dev/sdc1 /media/meego_usb
[alison@bonnet]$ ls /media/meego_usb
\/    boot/  etc/   lib/	 media/  opt/	root/  srv/  tmp/  var/
bin/  dev/   home/  lost+found/  mnt/	 proc/	sbin/  sys/  usr/
[alison@bonnet]$

Note that the image is not bootable. It doesn't need to be for the chroot hack to work.

How-to

On Ubuntu boot system

  • First, boot the Panda using Ubuntu on the microSD. Set up your account, create a root password, etc., following standard Ubuntu instructions.
  • Verify that 3D graphics are working on the Ubuntu instance. For example, try running the binary demo /GFX_Linux_SDK/OGLES2/SDKPackage/Binaries/X11/Demos/Skybox2/OGLES2Skybox2 (or whatever path on your system).
  • Either reboot into runlevel 3 or change to a text window (for example using Ctrl-Alt-F2) and login as root.
  • MeeGo will want to run its own X server, and each booted Linux system can have only one running X instance. (? I think.) Find Ubuntu'srunning gdm programs: 
ps axl | grep gdm

Locate the PIDs of gdm-binary and gdm-simple-slave and kill them: 

kill -TERM <gdm-binary-pid>
kill -TERM <gdm-simple-slave-pid>

If you type Ctrl-Alt-F7 to return to the workspace where Ubuntu was running X and gdm-greeter, you should now see a blank screen. Type 

ps axl | grep gdm

and 

ps axl | grep X

just to make sure.

  • As root, run File:Panda chroot setup.txt. The script copies all the needed shared object libraries from Ubuntu and bind-mounts the dynamic filesystems (/var, /proc, etc.) in MeeGo. The script is inspired by N900 chroot instructions although I found that MeeGo reported that dbus wasn't running unless I mounted all of /var/run.
  • Run 
chroot /media/meego_usb /bin/bash

The shell prompt will change. Welcome to MeeGo!

  • Note that you can change to any other virtual desktop (say via Ctrl-Alt-F4) and login into Ubuntu again. Since MeeGo's filesystem is mounted on top of Ubuntu's and they are running the same kernel, it's possible to copy binaries missing from MeeGo from Ubuntu. For example, I transferred working copies of "lsof" and "locate" that way.

On MeeGo chroot

  • Verify that you are running in MeeGo userland by trying, for example, "which uxlaunch" or something similar for a binary that Ubuntu doesn't include.
  • Launch GUI with 
startx&

On my system, the command took me to virtual desktop 8. To get back to the text console, type Ctrl-Alt-F2 again. You may freely change among Ubuntu text console, MeeGo text console and MeeGo GUI.

  • On the MeeGo GUI, you should get an xterm popping up under the ancient twm window manager. These are X failsafe defaults. It should be possible to start gdm instead, but I haven't tried it.
  • Note that the graphical display where the X server runs is :0.0 and is unrelated to the number of the desktop where the GUI is running: 
alison@ubuntu-installer:~$ echo $DISPLAY
:0.0
  • Have a look at /var/log/Xorg.0.log (or most recent similarly named file) to see if X has successfully loaded the PVR drivers for the GPU. You should see lines like 
[  2085.776] (II) LoadModule: "dri2"
[  2085.776] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so

<more stuff omitted> 

[  2085.777] (II) LoadModule: "pvr"
[  2085.778] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[  2085.779] (II) Module PVR: vendor="X.Org Foundation"
[  2085.779] 	compiled for 1.9.0, module version = 1.6.3758
[  2085.779] 	Module class: X.Org Video Driver
[  2085.779] 	ABI class: X.Org Video Driver, version 8.0
[  2085.779] (II) pvr: Driver for PowerVR chipsets: PowerVR SGX
[  2085.779] (--) using VT number 8
[  2085.798] (WW) Falling back to old probe method for pvr
[  2085.800] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2085.826] (II) pvr(0): Creating default Display subsection in Screen section

<more stuff omitted> 

[  2085.832] PVRPreInit: done
[  2085.832] (--) Depth 24 pixmap format is 32 bpp
[  2085.833] PVRScreenInit
[  2085.833] (II) v4l2: enabling local-alpha for /dev/video1
[  2085.849] (II) pvr(0): [DRI2] Setup complete
[  2085.849] (II) pvr(0): [DRI2]   DRI driver: pvr
[  2085.849] (II) EXA(0): Driver allocated offscreen pixmaps
[  2085.849] (II) EXA(0): Driver registered support for the following operations:
[  2085.849] (II)         Solid
[  2085.849] (II)         Copy
[  2085.849] (II)         Composite (RENDER acceleration)
[  2085.873] (==) pvr(0): Backing store disabled
[  2085.873] (==) pvr(0): Silken mouse enabled
[  2085.873] (==) pvr(0): DPMS enabled
[  2085.873] (==) pvr(0): Direct rendering enabled
[  2085.874] PVRScreenInit: done

and so forth. The first numbers in square brackets are timestamps that will vary from run to run. Note that the log file contains errors: 

[  2085.897] (EE) AIGLX error: dlopen of /usr/lib/dri/pvr_dri.so failed (/usr/lib/dri/pvr_dri.so: cannot open shared object file: No such file or directory)
[  2085.897] (EE) AIGLX: reverting to software rendering
[  2085.897] (II) AIGLX: Screen 0 is not DRI capable

Ignore them; they are expected.

  • Type 
xhost +

to allow clients to connect. (Not sure at this point if this is actually necessary.)

Test 3D graphics on MeeGo

  • At the xterm prompt, type 
alison@ubuntu-installer:~$ xdriinfo
Screen 0: pvr

That means the pvr driver is active on the X display.

  • At the xterm prompt, type 
alison@ubuntu-installer:~$ eglinfo
config number: 0
EGL vendor string: Imagination Technologies
EGL version string: 1.4 build 1.6.16.3758
EGL extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap
EGL_KHR_gl_texture_2D_image  EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image 
EGL_KHR_vg_parent_image EGL_KHR_fence_sync EGL_KHR_reusable_sync EGL_IMG_context_priority 
EGL client APIs are: OpenGL_ES OpenVG 
EGL config Attributes:
EGL_CONFIG_ID = 0x1

<stuff omitted> 

Creating OpenGL ES 2 context..
EGL context Attributes:
EGL_CONFIG_ID = 0x8
EGL_CONTEXT_CLIENT_TYPE = 0x30a0
EGL_CONTEXT_CLIENT_VERSION = 0x2
EGL_RENDER_BUFFER = 0x3038
Creating OpenVG context..
EGL context Attributes:
EGL_CONFIG_ID = 0x8
EGL_CONTEXT_CLIENT_TYPE = 0x30a1

and many more pages of such fascinating stuff.

  • Now the fun part: try running one of the binary demos that works on Ubuntu, e.g. 
alison@ubuntu-installer:~$ /opt/GFX_Linux_SDK/OGLES2/SDKPackage/Binaries/X11/Demos/Skybox2/OGLES2Skybox2

Cool, huh?

Running MeeGo GUI binaries

  • Now let's run "MeeGo Experience" binaries. First start mthemedaemon: 
mthemedaemon&

In the future, you can add this line to your /etc/X11/xinit/xinitrc or similar.

  • For handset image, launch MeeGo UX with 
duihome&

at xterm. Unfortunately this makes the X cursor disappear.

Future plans

Problem: hardfp vs. softfp

According to the authoritative Sage, Stskeeps and vgrade, the Ubuntu PVR drivers from TI are built for softfp libraries, while the new MeeGo 1.2 ABI uses hardfp libraries. That means that the Ubuntu 10.10 PowerVR drivers will not work with MeeGo 1.2. TI is working on hardfp support with Canonical and Linaro.

Acknowledgements

Thanks much to Jayabharath Goluguri, tripzero, Stskeeps, prpplague, sage, Nishanth Menon and all the rest of the gang on the Pandaboard discussion list. And thanks to TI for another high-performance, inexpensive, well-documented product.

Retrieved from "http://wiki.meego.com/Hardware-accelerated_graphics_on_Pandaboard_using_MeeGo"
Personal tools