Meego Wiki
Views

MeeGo SDK on Windows with VirtualBox

From MeeGo wiki
(Difference between revisions)
Jump to: navigation, search
(categorise, wikify)
 
(One intermediate revision not shown)
Line 1: Line 1:
-
'''Note: The Windows SDK landing page is here: http://wiki.meego.com/SDK/MeeGo_SDK_for_Windows  That includes the installer and support for Windows XP and Win 7 (32-bit). It is also based on QEMU VM (not VirtualBox)'''
+
'''Note: The Windows SDK landing page is here: [[SDK/MeeGo SDK for Windows]]. That includes the installer and support for Windows XP and Win 7 (32-bit). It is also based on QEMU VM (not VirtualBox)'''
== Note ==
== Note ==
Line 13: Line 13:
===VirtualBox===
===VirtualBox===
-
Download and install virtualbox from: [http://www.virtualbox.org/wiki/Downloads VirtualBox Downloads]<br />
+
 
-
After it's installed, open it up and create a new virtual machine by pressing ''New'' and following the wizard.<br />
+
# Download and install virtualbox from: [http://www.virtualbox.org/wiki/Downloads VirtualBox Downloads]
-
When you've created the machine, you can choose it from the list and press ''Settings'', go down to ''System'' then ''Processor'' and enable ''PAE/NX''.<br />
+
# After it's installed, open it up and create a new virtual machine by pressing ''New'' and following the wizard.
-
Also, go down to ''Display'' and enable ''3D Acceleration''.<br />
+
# When you've created the machine, you can choose it from the list and press ''Settings'', go down to ''System'' then ''Processor'' and enable ''PAE/NX''.
-
Last part, go down to ''Storage'' and choose the image-file for your Linux distro.<br />
+
# Also, go down to ''Display'' and enable ''3D Acceleration''.
-
After this is done, boot up the virtual machine and install the Linux distro.<br />
+
# Last part, go down to ''Storage'' and choose the image-file for your Linux distro.
 +
# After this is done, boot up the virtual machine and install the Linux distro.
===Linux Distro===
===Linux Distro===
-
When the distro has been installed, it is time to have the ''VirtualBox Guest Additions'' compiled and installed.<br />
+
 
-
In the window your virtual machine is running in, choose ''Devices'' and then ''Install Guest Additions''. In *ubuntu, it should now show a cd-rom on the desktop, double-click it to mount. <br />
+
When the distro has been installed, it is time to have the ''VirtualBox Guest Additions'' compiled and installed.
-
Go to a terminal (CTRL + ALT + F1 for example) and do the following:
+
# In the window your virtual machine is running in, choose ''Devices'' and then ''Install Guest Additions''. In *ubuntu, it should now show a cd-rom on the desktop, double-click it to mount.
-
#sudo apt-get install dkms gcc (This will install everything needed to build the guest additions, replace with the command needed for your distro, the path on a *ubuntu machine is most likely.)
+
# Go to a terminal (CTRL + ALT + F1 for example) and do the following:<pre>sudo apt-get install dkms gcc</pre>(This will install everything needed to build the guest additions, replace with the command needed for your distro, the path on a *ubuntu machine is most likely.)
-
#sudo ./path/to/cdrom/VBoxLinuxAdditions-x86.run (In *ubuntu the path will most likely be ''/media/VBOXADDITIONSsomethingsometime'')
+
# <pre>sudo ./path/to/cdrom/VBoxLinuxAdditions-x86.run</pre>(In *ubuntu the path will most likely be "<code>/media/VBOXADDITIONSsomethingsometime</code>") When the additions are installed, you can restart the virtual machine by issuing ''sudo reboot'' in the terminal.
-
When the additions are installed, you can restart the virtual machine by issuing ''sudo reboot'' in the terminal.
+
===MeeGo SDK===
===MeeGo SDK===
-
When everything above is done, you can go to: [[Getting_started_with_the_MeeGo_SDK_for_Linux]] and follow the guidelines there.
+
 
 +
When everything above is done, you can go to: [[SDK/Docs/1.0/Getting started with the MeeGo SDK for Linux]] and follow the guidelines there.
 +
 
 +
[[Category:SDK]]
 +
[[Category:Tutorial]]

Latest revision as of 12:27, 15 April 2011

Note: The Windows SDK landing page is here: SDK/MeeGo SDK for Windows. That includes the installer and support for Windows XP and Win 7 (32-bit). It is also based on QEMU VM (not VirtualBox)

Contents

Note

QEMU will not work within a VM.

Prerequisites

  1. VirtualBox
  2. A Linux distro of your choice, here I've used Xubuntu.

How To

VirtualBox

  1. Download and install virtualbox from: VirtualBox Downloads
  2. After it's installed, open it up and create a new virtual machine by pressing New and following the wizard.
  3. When you've created the machine, you can choose it from the list and press Settings, go down to System then Processor and enable PAE/NX.
  4. Also, go down to Display and enable 3D Acceleration.
  5. Last part, go down to Storage and choose the image-file for your Linux distro.
  6. After this is done, boot up the virtual machine and install the Linux distro.

Linux Distro

When the distro has been installed, it is time to have the VirtualBox Guest Additions compiled and installed.

  1. In the window your virtual machine is running in, choose Devices and then Install Guest Additions. In *ubuntu, it should now show a cd-rom on the desktop, double-click it to mount.
  2. Go to a terminal (CTRL + ALT + F1 for example) and do the following:
    sudo apt-get install dkms gcc
    (This will install everything needed to build the guest additions, replace with the command needed for your distro, the path on a *ubuntu machine is most likely.) 
  3. sudo ./path/to/cdrom/VBoxLinuxAdditions-x86.run
    (In *ubuntu the path will most likely be "/media/VBOXADDITIONSsomethingsometime") When the additions are installed, you can restart the virtual machine by issuing sudo reboot in the terminal.

MeeGo SDK

When everything above is done, you can go to: SDK/Docs/1.0/Getting started with the MeeGo SDK for Linux and follow the guidelines there.

Retrieved from "http://wiki.meego.com/MeeGo_SDK_on_Windows_with_VirtualBox"
Personal tools