This page tracks the developments in porting MeeGo Tv and applications to the trimslice device from compulab.
See  for the latest status of table ux on the device
and current status of XBMC
The image above was based on an image created by this kickstart file File:Tablet-armv7hl-tegra2-v02.ks
To install use an SD card (and put it in sticker facing down in the front SD slot of the trimslice). Write the image in the following way : bunzip2 -c trimslice/trimslice.img.bz2 | dd of=/dev/sdX
The easiest is to then use gparted to extend the image to your SD cards size. (the image is made to fit a 2GB SD card).
Default passwords are meego/meego and root/meego. meego is in the sudoers file.
Download this kickstart file File:Ts-armv7hl-tegra2-v05.ks to /tmp
Use mic to create the image: mic-image-creator --pkgmgr=yum --prefix=ts --tmpdir=/tmp --format=raw --cache=/var/tmp/meego13cache --arch=armv7hl --record-pkgs=name --config=/tmp/ts-armv7hl-tegra2-v05.ks --outdir=MYOUTDIR/meego-image --overlay-size-mb=64 --save-kernel --logfile=MYOUTDIR/meego-image/ts-armv7hl-tegra2-v05.log
Note: Occasionally latest-testing armv7hl is not be published this will manifest as a failure to download the repomd.xml. If this occurs you can search the site for the most recent 1.2.90 with published files and replace latest-testing (e.g. s/latest-testing/184.108.40.206.0.20110920.84/)
copy the image to SD and resize the root partition (p2) load and boot.
Compulab are announcing in the next week or so details of how to purchase a device at 45% reduction on the retail price. Community_Office/Community_device_program#Trimslice