Meego Wiki
Views

Quality/MeeGo1.2HandSetUXTestPlanforDialer

From MeeGo wiki
< Quality
Revision as of 13:31, 29 November 2010 by Mikikone (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

MeeGo 1.2 HandSet UX Test Plan for Dialer

Component Summary

This test plan is for MeeGo 1.2 HandSet UX Dialer application. Dialer is a simple Voice Call Dialer/Manager. It depends on ofono (for telephony services), call history (ofono call history plign) and libseaside (for contacts data).

Feature To Be Tested

All testable features coming to MeeGo 1.2 HandSet UX Dialer will be covered in this test plan. Note! Also telephony setting features are covered in this test plan.

  • Dialer Features to be tested are summarized as below:
Feature Name Description Comments
Feature 2630 - [FEA] Dialer application A phone dialing application (Dialer) is required to make and receive voice

calls.

Dialer should support integrated dialpad and integration to a Contacts application.

Dialer should support call history with dialed, received and missed calls.

xxx
Feature 2657 - [FEA] Dialer application extended call handling functionality Dialer should support the following features
• User Determined User Busy
• Call hold/retrieve
• Call waiting
• Multiple calls
• Explicit Call Transfer (ECT)
• Call Completion to Busy Subscriber (CCBS)
• USSD Service 
• Multiparty call
• Private conversation during multi-party call
• Split multiparty call
• Mute call
• Auto redial
• Send DTMF tones
• Volume up/down
xxx
Feature 2658 - [FEA] Dialer application call statistics Dialer application should support call statistics of
• Duration of call
• Cost of call
• Remaining ACM balance (TBD)
xxx
Feature 4143 - [FEA] Dialer - Call from Call History The system shall allow the user to initiate a call from a phone number in the

call history.

xxx
Feature 5435 - [FEA] Ringing tone assignment with a contact The device should support a ringing tone to be assigned to a specific contact. xxx
Feature 2660 - [FEA] Dialer application Call Line Identification Dialer should support Call Line Identification (CLIP+CLIR) GSM Supplementary

Service.

xxx
Feature 2795 - [FEA] Dialer application Call hold and retrieve Dialer should support to put the call on hold and retrieve it back from hold. xxx
Feature 2796 - [FEA] Dialer application Call waiting Dialer should support Call waiting functionality xxx
Feature 2797 - [FEA] Dialer application support for Multiple calls Dialer should support handling Multiple calls at the same time. Minimum 2 calls

at the same time should be supported (one on hold, one on line).

xxx
Feature 2809 - [FEA] Dialer application mute incoming call ringtone Dialer application should support to be able to mute incoming call ringing

tone.

xxx
Feature 2811 - [FEA] Dialer application DTMF support Dialer should support sending Dual-Tone Multi-Frequency (DTMF) tones to the

network in order to interact with provided network services, such as service numbers and conference centers.

xxx
Feature 4133 - [FEA]Dialer - One Click Viewing The system shall provide one click viewing access while in a call to the

following functions: mute, contacts, call history, loud speaker, hold, and home screen.

xxx
Feature 4134 - [FEA] Dialer - Dialer - Make a Call The user shall be able to make a call. xxx
Feature 4135 - [FEA] Dialer - Receive Call The system shall be able to receive calls from a connected device. xxx
Feature 4136 - [FEA] Dialer - End Call The system shall be able to end an active call by selecting end or by pressing

the hangup button

xxx
Feature 4137 - [FEA] Dialer - Voice Mail indicator The system shall notify the user that there is a Voice Mail waiting xxx
Feature 4138 - [FEA] Dialer - Display Name or Number The system presents a call screen that shows the Name or number, if the number

matches a contact address book entry, the name is shown, otherwise the number.

xxx
Feature 4139 - [FEA] Dialer - Display Contact's Photo The system presents a call screen that shall display the contact's photo if it

matches an address book entry.

xxx
Feature 4140 - [FEA] Dialer - Display Call Duration The system shall display the duration while in a call xxx
Feature 4149 - [FEA] Dialer - Sinlge key voicemail access Dial to voicemail with a single key press. xxx
Feature 4150 - [FEA] Dialer - Call selected Service Number Makes voice call to selected service number xxx
Feature 4152 - [FEA] Dialer - Phonebook access The terminal shall allow the user to browse the local phonebook while being in

a call.

xxx
Feature 2659 - [FEA] Dialer application voice mail support Dialer should support voice mail services
• Dial voice mailbox number stored in the SIM phonebook
• An indication for Voice Message Waiting (CPHS only)
xxx
Feature 4142 - [FEA] Dialer - View Call History The system shall be able to display the history of placed (outgoing and

rejected) and received (missed and answered) calls. Should list date of call, time of call, duration of call, type of call ( placed or received) and total number of calls

xxx
xxx xxx xxx

Feature Not To Be Tested

List of features that are not tested as part of MeeGo 1.2 HandSet UX are:


Feature 2806 - [FEA] Dialer application Multiparty call - Will be moved to release 1.2

Feature 5434 - [FEA] Dialer application ringtone MIDI support - Will be moved to release 1.2

Feature 2805 - [FEA] Dialer application support for Unstructured Supplementary Services Data (USSD) - Will be removed

Strategy and Approach

Dialer is tested in different test sets. Test sets containing dialer related test cases are

  • Sanity Test Set
    • Contains few basic dialer test cases that Dialer application is part of SW image, can be opened and basic call can be made
  • Basic Feature Test Set
    • Contains basic feature (Functional) test cases for every testable dialer feature
  • Extended Feature Test Set
    • Contains bunch of well selected dialer test cases to verify that delivered features (Functional) forming component are working
  • System Functional Test Set
    • Contains interaction and negative test cases were Dialer is used together with other components that are part of system
  • System Performance Test Set
    • Contains only Response Time part

Test Set Guideline: http://wiki.meego.com/Quality/TestSetGuideline

Hardware Platforms

  • N900, AAVA and MRST CDK

QA Contact

Personal tools