Revision as of 08:43, 28 January 2011 (view source) Esmietti (Talk | contribs) ← Older edit		Revision as of 09:40, 28 January 2011 (view source) Esmietti (Talk | contribs) (→How to install N900 automation tools to OTS worker) Newer edit →
Line 134:		Line 134:
	* If you want run ots_worker as user, copy SSH keys to the user and make udev rule for n900		* If you want run ots_worker as user, copy SSH keys to the user and make udev rule for n900
-	mkdir ~/.ssh	+	install-eat-key.sh
-	sudo cp /root/.ssh/config ~/.ssh	+
-	sudo cp /root/.ssh/id_eat_dsa ~/.ssh	+
-	sudo chown <user> ~/.ssh/*	+
-	chmod 600 ~/.ssh/*	+
	sudo nano /etc/udev/rules.d/meego-n900.rules		sudo nano /etc/udev/rules.d/meego-n900.rules
	SUBSYSTEMS=="usb", ATTR{idVendor}=="0421", ATTR{idProduct}=="0105", GROUP="<group>", MODE="0664"		SUBSYSTEMS=="usb", ATTR{idVendor}=="0421", ATTR{idProduct}=="0105", GROUP="<group>", MODE="0664"
Line 147:		Line 143:
	#!/bin/bash		#!/bin/bash
		+	hat_drv &
	hat_ctrl -pwr1=off		hat_ctrl -pwr1=off
	hat_ctrl -usb1data=off		hat_ctrl -usb1data=off
Line 154:		Line 151:
	hat_ctrl -usb1data=on		hat_ctrl -usb1data=on
	hat_ctrl -pwr1=on		hat_ctrl -pwr1=on
		+	killall hat_drv
	* Test manually that everything is OK, this is executed in the worker		* Test manually that everything is OK, this is executed in the worker
	conductor -u <image url>		conductor -u <image url>

---

Revision as of 09:40, 28 January 2011

Contents 1 OTS Setup 1.1 Used hardware 1.2 Network Setup 1.3 Preparation 1.4 OTS server installation 1.5 OTS worker installation 1.6 OTS tools 1.7 How to install N900 automation tools to OTS worker

OTS Setup

Used hardware

1 x Server (Ubuntu 10.10)

1 x Client (Ubuntu 10.10)

1 x HAT controller

1 x Power cable

1 x Power supply

2 x USB A-B cable

1 x USB A-microB cable

1 x N900

Network Setup

Using static IP addresses on all OTS machines is strongly recommended. It is possible to setup the system also with dynamic IP addresses but it might cause problems every now and then because IP's and hostnames change.

All OTS machines need to be able to access other OTS machines based on their hostname.

Preparation

There are two ways of getting OTS binary packages: from the source code or from the MeeGo Tools:Testing repository. From the repository you can get the stable version and from the source code the development version.

• Add Tools:Testing apt source to /etc/apt/sources.list

sudo nano /etc/apt/sources.list
deb http://download.meego.com/live/Tools:/Testing/xUbuntu_10.10/ /

Notice that if you are using Ubuntu 10.04, change the path.

• Add repository keys

gpg --keyserver subkeys.pgp.net --recv-keys 0BC7BEC479FC1F8A
gpg --export --armor 0BC7BEC479FC1F8A | sudo apt-key add -

• Update the repositories

sudo apt-get update

Build packages from source (optional)

• Install git core

sudo apt-get install git-core

• Get sources

git clone git://gitorious.org/meego-quality-assurance/ots.git

• Get building tools

sudo apt-get install dpkg-dev debhelper python-setuptools

• Build packages

cd ots
dpkg-buildpackage -rfakeroot

OTS server installation

• Install dependencies

sudo apt-get install python-django python-amqplib python-configobj rabbitmq-server test-definition

• Install OTS server components

sudo apt-get install python-ots-common python-ots-results python-ots-server

Or if you are using own built packages

sudo dpkg -i ...

• Configure OTS server settings

sudo nano /etc/ots_server.ini

Recommended to change following:

'example_sw_product', example to 'meego_product'
'devicegroup', example to 'meego_n900'

• Install OTS server plug-ins

Logger plug-in (recommended)

See more plug-ins from OTS Plug-ins

• If logger plug-in is installed

Change permissions to logging directory
sudo chown www-data:www-data /var/log/ots

Now the OTS server can be used via apache (django_xmlrpc).

• If logger plug-in is not installed

Change user permissions to logging directory
sudo chown <user>:<group> /var/log/ots

ots_server

OTS worker installation

• Install dependencies

sudo apt-get install python-amqplib testrunner-lite

• Install OTS worker packages

sudo apt-get install python-ots-common python-ots-worker

• Configure OTS worker settings

sudo nano /etc/ots.ini

Change 'devicegroup', example meego_n900

Change 'host' to server's address

• Change permissions to OTS worker log

sudo chown <user>:<group> /var/log/ots.log

• Start OTS worker

ots_worker

OTS tools

Tools are used for triggering test runs from the command line.

• Install OTS tools

sudo apt-get install python-ots-tools

• Trigger a test run

ots_trigger -s localhost/xmlrpc -b test_build -i http://url_to_image -p example_sw_product -e test@man.com

• Kickstart file for automation can be found from

http://meego.gitorious.org/meego-quality-assurance/enables-automated-testing/blobs/ks/meego-n900-autotest.ks

• You need to build the image with mic-image-creator with parameters:

--save-kernel --package=tar.gz

How to install N900 automation tools to OTS worker

• Install dependencies

sudo apt-get install meego-ai-flaster eat-host-ubuntu

• Get N900 flasher from the Nokia's tablets-dev portal

http://tablets-dev.nokia.com/maemo-dev-env-downloads.php?f=maemo_flasher-3.5_2.5.2.2_i386.deb
sudo dpkg -i maemo_flasher-3.5_2.5.2.2_i386.deb

• Configure conductor to use rpm and fetch /var/log/messages

sudo nano /etc/conductor.conf

• If you want run ots_worker as user, copy SSH keys to the user and make udev rule for n900

install-eat-key.sh
sudo nano /etc/udev/rules.d/meego-n900.rules
SUBSYSTEMS=="usb", ATTR{idVendor}=="0421", ATTR{idProduct}=="0105", GROUP="<group>", MODE="0664"

• Create a power_cycle.sh script for turning N900 on/off. This requires external accessory, like HAT

sudo nano /usr/bin/power_cycle.sh

#!/bin/bash

hat_drv &
hat_ctrl -pwr1=off
hat_ctrl -usb1data=off
hat_ctrl -usb1pwr=off
sleep 2;
hat_ctrl -usb1pwr=on
hat_ctrl -usb1data=on
hat_ctrl -pwr1=on
killall hat_drv

• Test manually that everything is OK, this is executed in the worker

conductor -u <image url>