Quality/QA-tools/PXEInstall

Revision as of 06:36, 14 September 2010 (view source) Jwang (Talk | contribs) ← Older edit		Latest revision as of 06:37, 14 September 2010 (view source) Jwang (Talk | contribs)
Line 8:		Line 8:
	The configuration file is sth like		The configuration file is sth like
-
	default local		default local
	prompt 1		prompt 1
	timeout 5		timeout 5
-
	display boot.msg		display boot.msg
	label local		label local
	localboot 0		localboot 0
-
	label installer		label installer
	kernel xxxx		kernel xxxx

---

Latest revision as of 06:37, 14 September 2010

• Make sure the package for TFTP server is installed.
• Prepare the directory and PXE boot loader for TFTP server

 [root@meego-global ~]#mkdir /tftpboot/
 [root@meego-global ~]#cp /usr/lib/syslinux/pxelinux.0   /tftpboot

• Setup boot configuration file

 [root@meego-global ~]#mkdir / tftpboot/pxelinux.cfg
 [root@meego-global ~]#vi / tftpboot/pxelinux.cfg/mac_address

The configuration file is sth like

 default local
 prompt 1
 timeout 5
 display boot.msg
 label local
 localboot 0
 label installer
 kernel xxxx
 append initrd=xxxx

• Configure tftp service through xinet

Edit /etc/xinetd.d/tftp as below

 service tftp
 {
       disable = no     #enable the tftp server
       socket_type             = dgram
       protocol                = udp
       wait                    = yes
       user                    = root
       server                  = /usr/sbin/in.tftpd
       server_args             = -s /tftpboot     #set the tftp root dir is /tftpboot
       per_source              = 11
       cps                     = 100 2
       flags                   = IPv4
 }

• Enable auto start the tftp server when next time system reboot

 [root@meego-global ~]# ntsysv

• Install PXE kernel and initrd

For Fedora, there is existing PXE boot kernel and initrd, just use them. But for meego, you need create by yourself. Definitely you can refer to Fedora. Make sure path is consistent with pxe configuration file