Meego Wiki
Views

SDK/Docs/1.2-preview-under-progress

From MeeGo wiki
< SDK | Docs(Difference between revisions)
Jump to: navigation, search
(→Add MeeGo SDK 1.1.80 and later targets)
(categorise, wikify links)
 
(12 intermediate revisions not shown)
Line 13: Line 13:
* New Installation
* New Installation
You can have a New Installation of MeeGo SDK 1.2-preview by removing all old components.
You can have a New Installation of MeeGo SDK 1.2-preview by removing all old components.
-
To remove the previous SDK, please refer to http://wiki.meego.com/SDK/Docs/1.1/Getting_started_with_the_MeeGo_SDK_for_Linux#Removing_components.  
+
To remove the previous SDK, please refer to [[SDK/Docs/1.1/Getting started with the MeeGo SDK for Linux#Removing components]].  
* Update from previous installation
* Update from previous installation
-
Install the MeeGo SDK 1.1 with http://wiki.meego.com/SDK/Docs/1.1/Getting_started_with_the_MeeGo_SDK_for_Linux
+
Install the MeeGo SDK 1.1 with [[SDK/Docs/1.1/Getting started with the MeeGo SDK for Linux]]
* Note
* Note
The Update should just work but in case you have any problem, a new installation can be tried.  
The Update should just work but in case you have any problem, a new installation can be tried.  
Line 26: Line 26:
* Note:
* Note:
**The toolchain repo "http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2" is only used when devel:tools:sdk:host is used.  
**The toolchain repo "http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2" is only used when devel:tools:sdk:host is used.  
-
** The Qt Simulator is only available in devel:tools:sdk:host repository at this stage.  
+
** The Qt Simulator is only available in devel:tools:sdk:host repository at this stage. So don't try to install qt-simulator meego-sdk-qt-simulator-skin if you are not using the devel:tools:sdk:host repo.  
=== On Ubuntu or Debian ===
=== On Ubuntu or Debian ===
Line 33: Line 33:
  <li>Add the following line to <code>/etc/apt/sources.list.d/meego-sdk.list</code>.<br>
  <li>Add the following line to <code>/etc/apt/sources.list.d/meego-sdk.list</code>.<br>
  Replace ${distribution} with one of the following: "Debian_5.0", "Ubuntu_09.10", "Ubuntu_10.04" or "Ubuntu_10.10".
  Replace ${distribution} with one of the following: "Debian_5.0", "Ubuntu_09.10", "Ubuntu_10.04" or "Ubuntu_10.10".
-
<pre>deb http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/ /  
+
<br>For getting the Development version set:
 +
<pre>deb http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/ /  
deb http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/ / </pre>
deb http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/ / </pre>
  </li>
  </li>
-
Or with Tools:SDK:Host repo
+
Alternativelly for the Testing version use:
  <pre>deb http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/ / </pre>
  <pre>deb http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/ / </pre>
 +
<br> Note: If you use the Testing repository qt-simulator will not install
  <li>Add the repository public key:
  <li>Add the repository public key:
  <pre>$ gpg --keyserver pgpkeys.mit.edu --recv 0BC7BEC479FC1F8A
  <pre>$ gpg --keyserver pgpkeys.mit.edu --recv 0BC7BEC479FC1F8A
Line 99: Line 101:
<ul>
<ul>
  <li>Debian / Ubuntu
  <li>Debian / Ubuntu
-
  <pre>$ sudo apt-get install qt-simulator qt-simulator-skin-handset-864x480 libattica0</pre>
+
  <pre>$ sudo apt-get install qt-simulator meego-sdk-qt-simulator-skin libattica0</pre>
  </li>
  </li>
  <li>Fedora
  <li>Fedora
-
  <pre>$ sudo yum install qt-simulator qt-simulator-skin-handset-864x480 libattica0</pre>
+
  <pre>$ sudo yum install qt-simulator meego-sdk-qt-simulator-skin libattica0</pre>
  </li>
  </li>
On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.  
On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.  
  <li>OpenSUSE / MeeGo
  <li>OpenSUSE / MeeGo
-
  <pre>$ sudo zypper install qt-simulator qt-simulator-skin-handset-864x480 libattica0</pre>
+
  <pre>$ sudo zypper install qt-simulator meego-sdk-qt-simulator-skin libattica0</pre>
  </li>
  </li>
</ul>
</ul>
Line 139: Line 141:
<ul>
<ul>
  <li>Debian / Ubuntu
  <li>Debian / Ubuntu
-
  <pre>$ sudo apt-get install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator qt-simulator-skin-handset-864x480</pre>
+
  <pre>$ sudo apt-get install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin</pre>
  </li>
  </li>
  <li>Fedora
  <li>Fedora
-
  <pre>$ sudo yum install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator qt-simulator-skin-handset-864x480</pre>
+
  <pre>$ sudo yum install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin meego-sdk-libqtdbus4 meego-sdk-libphonon4 meego-sdk-libqthelp4 meego-sdk-libqtdesigner4</pre>
  </li>
  </li>
On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.  
On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.  
  <li>OpenSUSE / MeeGo
  <li>OpenSUSE / MeeGo
-
  <pre>$ sudo zypper install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator qt-simulator-skin-handset-864x480</pre>
+
  <pre>$ sudo zypper install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin meego-sdk-libqtdbus4 meego-sdk-libphonon4 meego-sdk-libqthelp4 meego-sdk-libqtdesigner</pre>
  </li>
  </li>
</ul>
</ul>
Line 177: Line 179:
== Add MeeGo SDK 1.1.80 and later targets ==  
== Add MeeGo SDK 1.1.80 and later targets ==  
-
* Download the [http://download3.meego.com/meego-sdk-update-target-1.0.3 meego-sdk-update-target] tool
+
We use meego-sdk-update-target tool to add new target. For detailed usage of meego-sdk-update-target, please refer to [[SDK/Tutorials/Add_a_new_target]].
-
** The one here is version 1.0.3.  
+
-
** You can get the latest version of meego-sdk-update-target from http://meego.gitorious.org/meego-developer-tools/meego-sdk-update-target.
+
* Update handset target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want.  
* Update handset target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want.  
Line 186: Line 186:
* Update netbook target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want.  
* Update netbook target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want.  
  sudo ./meego-sdk-update-target -u 1.2-preview-test01 -d netbook -a ia32 -meego-version 1.2 -sysroot ${url_sysroot} -runtime ${url_runtime}
  sudo ./meego-sdk-update-target -u 1.2-preview-test01 -d netbook -a ia32 -meego-version 1.2 -sysroot ${url_sysroot} -runtime ${url_runtime}
-
 
-
* For detailed usage of meego-sdk-update-target, please refer to http://wiki.meego.com/SDK/Tutorials/Add_a_new_target.
 
== Add Qt Simulator target ==  
== Add Qt Simulator target ==  
Line 199: Line 197:
* Build
* Build
* To use the simulator, please refer to http://doc.qt.nokia.com/qtsimulator-1.1/simulator-starting.html for more information.
* To use the simulator, please refer to http://doc.qt.nokia.com/qtsimulator-1.1/simulator-starting.html for more information.
 +
 +
[[Category:SDK]]
 +
[[Category:Meego-1.2]]

Latest revision as of 11:00, 14 April 2011

This page describe how to use the initial MeeGo SDK 1.2-preview and test it. It's not for real MeeGo SDK 1.2-preview version and the contents here are mainly for QA testing before the release. But it will become official when it is released.

Contents

Introduction

MeeGo SDK 1.2-preview will include following major changes:

  • Qt Creator update to 2.1-rc.
  • Qt Simulator and handset skin
  • MeeGo 1.2 toolchain
  • MeeGo 1.2 new targets support. Covers 1.1.80 and up.

Prerequisites

You can either do a new installation or update an existing installation to get MeeGo SDK 1.2-preview.

  • New Installation

You can have a New Installation of MeeGo SDK 1.2-preview by removing all old components. To remove the previous SDK, please refer to SDK/Docs/1.1/Getting started with the MeeGo SDK for Linux#Removing components.

  • Update from previous installation

Install the MeeGo SDK 1.1 with SDK/Docs/1.1/Getting started with the MeeGo SDK for Linux

  • Note

The Update should just work but in case you have any problem, a new installation can be tried.

Update installation repository of MeeGo SDK 1.2-preview

  • There are 3 repositories for you to update to MeeGo SDK 1.2-preview
  • MeeGo SDK development repo - devel:tools:sdk:host - Changed frequently and mainly used by MeeGo SDK team.
  • MeeGo SDK testing repo - Tools:SDK:Host - Be stabler than devel:tools:sdk:host.
  • MeeGo SDK release repo - "http://repo.meego.com/MeeGo/sdk/host/repos/". For release. Not ready for 1.2-preview now.
  • Note:

On Ubuntu or Debian

  1. Add the following line to /etc/apt/sources.list.d/meego-sdk.list.
    Replace ${distribution} with one of the following: "Debian_5.0", "Ubuntu_09.10", "Ubuntu_10.04" or "Ubuntu_10.10".
    For getting the Development version set: 
    deb http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/ / 
deb http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/ /

    2. Alternativelly for the Testing version use: 

    deb http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/ /


    Note: If you use the Testing repository qt-simulator will not install

  2. Add the repository public key: 
    $ gpg --keyserver pgpkeys.mit.edu --recv 0BC7BEC479FC1F8A
$ gpg --export --armor 0BC7BEC479FC1F8A | sudo apt-key add -
  3. Update the packages database: 
    $ sudo apt-get update
  4. To check that the MeeGo repository has been correctly added, run the following command. The details of the meego-sdk-qtcreator package should be printed. 
    $ apt-cache policy meego-sdk-qtcreator

    Make sure you installed the 2.1.0~rc1 or newer version.

On Fedora

  1. Go to the yum repository directory: 
    $ cd /etc/yum.repos.d/
  2. Add the MeeGo SDK 1.2-preview yum repository.
    Replace ${distribution} with one of the following: "Fedora_12" or "Fedora_13". 
    $ sudo wget http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/devel:tools:sdk:host.repo
$ sudo wget http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/devel:tools:sdk:host:toolchain:MeeGo:1.2.repo

    3. Or with Tools:SDK:Host repo 

    $ sudo wget http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/Tools:SDK:Host.repo
  3. Install the signing key: 
    $ sudo rpm --import http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/repodata/repomd.xml.key
$ sudo rpm --import http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/repodata/repomd.xml.key

    4. Or with Tools:SDK:Host repo 

    $ sudo rpm --import http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/repodata/repomd.xml.key
  4. Update the packages database: 
    $ sudo yum update

On MeeGo

  • To add the MeeGo SDK repository on a system running MeeGo, run the following command.
    Replace ${distribution}/${version} with one of the following values: "Trunk". 
    $ sudo zypper addrepo -f http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/devel:tools:sdk:host.repo
$ sudo zypper addrepo -f http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/devel:tools:sdk:host.repo

    • Or with Tools:SDK:Host repo 

    $ sudo zypper addrepo -f http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/Tools:SDK:Host.repo

On openSUSE

  • To add the MeeGo repository, run the following command.
    Replace ${distribution}/${version} with one of the following values: "openSUSE_11.2" or "openSUSE_11.3". 
    $ sudo zypper addrepo -f http://download.meego.com/live/devel:/tools:/sdk:/host/${distribution}/devel:tools:sdk:host.repo
$ sudo zypper addrepo -f http://download.meego.com/live/devel:/tools:/sdk:/host:/toolchain:/MeeGo:/1.2/${distribution}/devel:tools:sdk:host:toolchain:MeeGo:1.2.repo

    Or with Tools:SDK:Host repo 

    $ sudo zypper addrepo -f http://download.meego.com/live/Tools:/SDK:/Host/${distribution}/Tools:SDK:Host.repo

Install a new MeeGo SDK 1.2-preview

Skip this step if you are doing a update.

  • Debian / Ubuntu 
    $ sudo apt-get install qt-simulator meego-sdk-qt-simulator-skin libattica0
  • Fedora 
    $ sudo yum install qt-simulator meego-sdk-qt-simulator-skin libattica0

    • On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.

  • OpenSUSE / MeeGo 
    $ sudo zypper install qt-simulator meego-sdk-qt-simulator-skin libattica0

For IA32:

  • Debian / Ubuntu 
    $ sudo apt-get install meego-sdk-ia32 meego-1.2-sdk-ia32-toolchain
  • Fedora 
    $ sudo yum install meego-sdk-ia32 meego-1.2-sdk-ia32-toolchain
  • OpenSUSE / MeeGo 
    $ sudo zypper install meego-sdk-ia32 meego-1.2-sdk-ia32-toolchain

For ARM:

  • Debian / Ubuntu 
    $ sudo apt-get install meego-sdk-armv7l
  • Fedora 
    $ sudo yum install meego-sdk-armv7l
  • OpenSUSE / MeeGo 
    $ sudo zypper install meego-sdk-armv7l

Update the MeeGo SDK

Skip this step if you are doing a new installation

  • Debian / Ubuntu 
    $ sudo apt-get install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin
  • Fedora 
    $ sudo yum install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin meego-sdk-libqtdbus4 meego-sdk-libphonon4 meego-sdk-libqthelp4 meego-sdk-libqtdesigner4

    • On Fedora 13, the attica has been provided by the system so the libattica0 might not be needed.

  • OpenSUSE / MeeGo 
    $ sudo zypper install meego-sdk-qtcreator madde madde-config-common qt-tools libattica0 qt-simulator meego-sdk-qt-simulator-skin meego-sdk-libqtdbus4 meego-sdk-libphonon4 meego-sdk-libqthelp4 meego-sdk-libqtdesigner

For ARM only:

  • Debian / Ubuntu 
    $ sudo apt-get install qemu-arm madde-config-armv7l
  • Fedora 
    $ sudo yum install qemu-arm madde-config-armv7l
  • OpenSUSE / MeeGo 
    $ sudo zypper install qemu-arm madde-config-armv7l

For IA32 only:

  • Debian / Ubuntu 
    $ sudo apt-get install meego-1.2-sdk-ia32-toolchain qemu-gl madde-config-ia32
  • Fedora 
    $ sudo yum install meego-1.2-sdk-ia32-toolchain qemu-gl madde-config-ia32
  • OpenSUSE / MeeGo 
    $ sudo zypper install meego-1.2-sdk-ia32-toolchain qemu-gl madde-config-ia32

Add MeeGo SDK 1.1.80 and later targets

We use meego-sdk-update-target tool to add new target. For detailed usage of meego-sdk-update-target, please refer to SDK/Tutorials/Add_a_new_target.

  • Update handset target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want. 
sudo ./meego-sdk-update-target -u 1.2-preview-test01 -d handset -a ia32 -meego-version 1.2 -sysroot ${url_sysroot} -runtime ${url_runtime}
  • Update netbook target. Replace the {url_sysroot} and {url_runtime} with the url to the real tarballs and provide a target name as you want. 
sudo ./meego-sdk-update-target -u 1.2-preview-test01 -d netbook -a ia32 -meego-version 1.2 -sysroot ${url_sysroot} -runtime ${url_runtime}

Add Qt Simulator target

  • Launch qt-simulator. The qt-simulator has to be registered manually before it's usable. Will be fixed. 
/opt/meego/qt-simulator/simulator -registeronly
  • Launch meego-sdk-qtcreator
  • Go to Tools->Options->Qt4->Qt Versions
  • Click the "+" to add a new "Qt Version"
  • In "Version name", provide a name.
  • In "qmake locations:", browser and select /opt/meego/simulator-qt/bin/qmake
  • Build
  • To use the simulator, please refer to http://doc.qt.nokia.com/qtsimulator-1.1/simulator-starting.html for more information.
Retrieved from "http://wiki.meego.com/SDK/Docs/1.2-preview-under-progress"
Personal tools