http://wiki.meego.com/index.php?title=Special:Contributions/Steventroughtonsmith&feed=atom&limit=50&target=Steventroughtonsmith&year=&month= 2013-05-25T10:47:53Z From MeeGo wiki MediaWiki 1.16.2 http://wiki.meego.com/ARM/MSMQSD 2011-01-12T09:36:19Z

<p>Steventroughtonsmith: /* HTC HD2 */</p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == HTC HD2 ==<br /> <br /> [[File:DSC00586_2.jpg|800px]]<br /> <br /> === Instructions ===<br /> <br /> The rootfs is built similarly to the Nexus One image, but the built ext2 image is copied as a file to the SD card and booted using magldr or haret; no flashing needed.<br /> <br /> Kickstart, prebuilt image, and more info forthcoming!<br /> <br /> === What works ===<br /> <br /> * Touchscreen<br /> * WiFi<br /> * ADB (Android Debug Bridge)<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Related Wiki Pages ==<br /> <br /> [[ARM/Hummingbird| MeeGo on ARM/Hummingbird]]<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/File:DSC00586_2.jpg 2011-01-12T09:36:02Z

<p>Steventroughtonsmith: MeeGo 1.1 daily on HTC HD2</p> <hr /> <div>MeeGo 1.1 daily on HTC HD2</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T19:11:45Z

<p>Steventroughtonsmith: /* What works */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:DSC00579.jpg|400px]]<br /> [[File:nexuss.jpg|400px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> * Screen brightness<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> == Screen brightness ==<br /> Will add this to a newer kickstart, but for the time being, you can bring the brightness to full by doing:<br /> <br /> * echo 255 &gt; /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/brightness<br /> <br /> == Notes ==<br /> dmesg output is available on [[Talk:ARM/Hummingbird]].<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]<br /> <br /> == Team members ==<br /> <br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T13:36:52Z

<p>Steventroughtonsmith: /* Screen brightness */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:DSC00579.jpg|400px]]<br /> [[File:nexuss.jpg|400px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> * Screen brightness<br /> <br /> == What does<br /> n't work ==<br /> <br /> * Touchscreen<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> == Screen brightness ==<br /> Will add this to a newer kickstart, but for the time being, you can bring the brightness to full by doing:<br /> <br /> * echo 255 &gt; /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/brightness<br /> <br /> == Notes ==<br /> dmesg output is available on [[Talk:ARM/Hummingbird]].<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]<br /> <br /> == Team members ==<br /> <br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/Talk:ARM/Hummingbird 2011-01-10T13:35:36Z

<p>Steventroughtonsmith: /* dmesg output = */</p> <hr /> <div>=== dmesg output ===<br /> <br /> [ 0.000000] Initializing cgroup subsys cpu<br /> [ 0.000000] Linux version 2.6.35.7-g814333b (root@Ubuntu) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Sun Jan 9 19:45:54 GMT 2011<br /> [ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f<br /> [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache<br /> [ 0.000000] Machine: herring<br /> [ 0.000000] Partition (from atag) bootloader -- Offset:0x00000000 Size:0x00200000<br /> [ 0.000000] Partition (from atag) misc -- Offset:0x004c0000 Size:0x00140000<br /> [ 0.000000] Partition (from atag) boot -- Offset:0x00600000 Size:0x00800000<br /> [ 0.000000] Partition (from atag) recovery -- Offset:0x00e00000 Size:0x00800000<br /> [ 0.000000] Partition (from atag) cache -- Offset:0x01600000 Size:0x1d580000<br /> [ 0.000000] Partition (from atag) radio -- Offset:0x1eb80000 Size:0x00d80000<br /> [ 0.000000] Partition (from atag) efs -- Offset:0x1f900000 Size:0x006c0000<br /> [ 0.000000] Memory policy: ECC disabled, Data cache writeback<br /> [ 0.000000] On node 0 totalpages: 20480<br /> [ 0.000000] free_area_init_node: node 0, pgdat c0562a6c, node_mem_map c0659000<br /> [ 0.000000] Normal zone: 160 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 20320 pages, LIFO batch:3<br /> [ 0.000000] On node 1 totalpages: 65536<br /> [ 0.000000] free_area_init_node: node 1, pgdat c05630f4, node_mem_map d0002000<br /> [ 0.000000] Normal zone: 512 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 65024 pages, LIFO batch:15<br /> [ 0.000000] On node 2 totalpages: 32512<br /> [ 0.000000] free_area_init_node: node 2, pgdat c056377c, node_mem_map e0001000<br /> [ 0.000000] Normal zone: 254 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 32258 pages, LIFO batch:7<br /> [ 0.000000] On node 3 totalpages: 0<br /> [ 0.000000] free_area_init_node: node 3, pgdat c0563e04, node_mem_map c0701c20<br /> [ 0.000000] Normal zone: 1 pages exceeds realsize 0<br /> [ 0.000000] CPU S5PV210/S5PC110 (id 0x43110222)<br /> [ 0.000000] s5pv210_init_clocks: initializing clocks<br /> [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics<br /> [ 0.000000] s5pv210_setup_clocks: registering clocks<br /> [ 0.000000] s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00300400<br /> [ 0.000000] s5pv210_setup_clocks: xtal is 24000000<br /> [ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=96000000 V=54000000<br /> [ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000<br /> [ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000<br /> [ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000<br /> [ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 133400000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000<br /> [ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000<br /> [ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 166750000<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000<br /> [ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000<br /> [ 0.000000] sclk: source is mout_mpll (1), rate is 66700000<br /> [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000<br /> [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000<br /> [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000<br /> [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x312d7000<br /> [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40204000<br /> [ 0.000000] s5pv210: 6291456 bytes system memory reserved for fimc0 at 0x42604000<br /> [ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x42c04000<br /> [ 0.000000] s5pv210: 6291456 bytes system memory reserved for fimc2 at 0x435af000<br /> [ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x336d7000<br /> [ 0.000000] s5pv210: 4915200 bytes system memory reserved for fimd at 0x43baf000<br /> [ 0.000000] Built 3 zonelists in Zone order, mobility grouping on. Total pages: 117602<br /> [ 0.000000] Kernel command line: no_console_suspend=1 console=null androidboot.serialno=36325C63C14E00EC androidboot.bootloader=I9020XXJK1 androidboot.baseband=I9020XXJK8 androidboot.carrier=TMB gain_code=0 s3cfb.bootloaderfb=0x34a00000 <br /> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)<br /> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br /> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br /> [ 0.000000] Memory: 80MB 256MB 127MB = 463MB total<br /> [ 0.000000] Memory: 351616k/351616k available, 122496k reserved, 0K highmem<br /> [ 0.000000] Virtual kernel memory layout:<br /> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<br /> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<br /> [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)<br /> [ 0.000000] vmalloc : 0xe8000000 - 0xfc000000 ( 320 MB)<br /> [ 0.000000] lowmem : 0xc0000000 - 0xe7f00000 ( 639 MB)<br /> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)<br /> [ 0.000000] .init : 0xc0008000 - 0xc002c000 ( 144 kB)<br /> [ 0.000000] .text : 0xc002c000 - 0xc055e000 (5320 kB)<br /> [ 0.000000] .data : 0xc055e000 - 0xc05a5740 ( 286 kB)<br /> [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=4<br /> [ 0.000000] Hierarchical RCU implementation.<br /> [ 0.000000] RCU-based detection of stalled CPUs is disabled.<br /> [ 0.000000] Verbose stalled-CPUs detection is disabled.<br /> [ 0.000000] NR_IRQS:393<br /> [ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41<br /> [ 0.000000] mult[140737]<br /> [ 0.000000] max_delta_ns[2937815369]<br /> [ 0.000000] min_delta_ns[30517]<br /> [ 0.000000] rate[32768]<br /> [ 0.000000] HZ[256]<br /> [ 0.000000] Console: colour dummy device 80x30<br /> [ 0.000207] Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)<br /> [ 0.081958] pid_max: default: 32768 minimum: 301<br /> [ 0.082024] Mount-cache hash table entries: 512<br /> [ 0.082373] Initializing cgroup subsys debug<br /> [ 0.082389] Initializing cgroup subsys cpuacct<br /> [ 0.082400] Initializing cgroup subsys freezer<br /> [ 0.082430] CPU: Testing write buffer coherency: ok<br /> [ 0.084948] regulator: core version 0.5<br /> [ 0.085109] NET: Registered protocol family 16<br /> [ 0.092889] console [ttyFIQ0] enabled<br /> [ 0.093001] Registered FIQ tty driver c4c1b300<br /> [ 0.096272] ram_console: got buffer at 57f00000, size ff000<br /> [ 0.096409] ram_console: no valid data in buffer (sig = 0x00000000)<br /> [ 0.109608] console [ram-1] enabled<br /> [ 0.109804] S5PC110 Hardware version : EVT1<br /> [ 0.109919] HWREV is 0xb<br /> [ 0.110580] invalid media device<br /> [ 0.110678] invalid media device<br /> [ 0.110775] invalid media device<br /> [ 0.110872] invalid media device<br /> [ 0.111050] invalid media device<br /> [ 0.111148] invalid media device<br /> [ 0.111283] S3C Power Management, Copyright 2004 Simtec Electronics<br /> [ 0.111469] pmstats at 57fff000<br /> [ 0.112742] S5PV210: Initializing architecture<br /> [ 0.113192] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0<br /> [ 0.113451] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8<br /> [ 0.113683] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12<br /> [ 0.113912] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16<br /> [ 0.114223] regulator: pd_audio_supply: 5000 mV normal <br /> [ 0.114527] regulator: pd_cam_supply: 5000 mV normal <br /> [ 0.114759] regulator: pd_tv_supply: 5000 mV normal <br /> [ 0.115058] regulator: pd_lcd_supply: 5000 mV normal <br /> [ 0.115275] regulator: pd_g3d_supply: 5000 mV normal <br /> [ 0.115580] regulator: pd_mfc_supply: 5000 mV normal <br /> [ 0.121316] bio: create slab &lt;bio-0&gt; at 0<br /> [ 0.122109] SCSI subsystem initialized<br /> [ 0.122638] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)<br /> [ 0.122854] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)<br /> [ 0.124364] regulator: VALIVE_1.2V: 1200 mV <br /> [ 0.125076] regulator: VUSB_1.1V: 1100 mV <br /> [ 0.126302] regulator: VADC_3.3V: 3300 mV <br /> [ 0.127438] regulator: VLCD_1.8V: 1800 mV <br /> [ 0.128126] regulator: VUSB_3.3V: 3300 mV <br /> [ 0.129375] regulator: VCC_2.8V_PDA: 2800 mV <br /> [ 0.130070] regulator: CAM_AF_3.0V: 3000 mV <br /> [ 0.130856] regulator: CAM_SENSOR_CORE_1.2V: 1200 mV <br /> [ 0.131551] regulator: VGA_VDDIO_2.8V: 2800 mV <br /> [ 0.132252] regulator: VGA_DVDD_1.8V: 1800 mV <br /> [ 0.133046] regulator: CAM_ISP_HOST_2.8V: 2800 mV <br /> [ 0.133746] regulator: VGA_AVDD_2.8V: 2800 mV <br /> [ 0.134988] regulator: VCC_3.0V_LCD: 3000 mV <br /> [ 0.135496] regulator: VDD_ARM: 750 &lt;--&gt; 1500 mV at 1200 mV <br /> [ 0.136009] regulator: VDD_INT: 750 &lt;--&gt; 1500 mV at 1100 mV <br /> [ 0.137281] regulator: VCC_1.8V: 1800 mV <br /> [ 0.137981] regulator: CAM_ISP_CORE_1.2V: 1200 mV <br /> [ 0.138378] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)<br /> [ 0.138684] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)<br /> [ 0.138987] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)<br /> [ 0.139291] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL)<br /> [ 0.139671] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)<br /> [ 0.139895] i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL)<br /> [ 0.140284] i2c-gpio i2c-gpio.14: using pins 240 (SDA) and 239 (SCL)<br /> [ 0.140696] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)<br /> [ 0.141144] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter<br /> [ 0.141618] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter<br /> [ 0.141946] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter<br /> [ 0.142513] Advanced Linux Sound Architecture Driver Version 1.0.23.<br /> [ 0.143079] Bluetooth: Core ver 2.15<br /> [ 0.143234] NET: Registered protocol family 31<br /> [ 0.143419] Bluetooth: HCI device and connection manager initialized<br /> [ 0.143525] Bluetooth: HCI socket layer initialized<br /> [ 0.143852] Switching to clocksource clock_source_systimer<br /> [ 0.150691] NET: Registered protocol family 2<br /> [ 0.151077] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)<br /> [ 0.151990] TCP established hash table entries: 16384 (order: 5, 131072 bytes)<br /> [ 0.152501] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)<br /> [ 0.153205] TCP: Hash tables configured (established 16384 bind 16384)<br /> [ 0.153310] TCP reno registered<br /> [ 0.153416] UDP hash table entries: 256 (order: 1, 12288 bytes)<br /> [ 0.153626] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)<br /> [ 0.153889] NET: Registered protocol family 1<br /> [ 0.154290] Trying to unpack rootfs image as initramfs...<br /> [ 0.370890] Freeing initrd memory: 2904K<br /> [ 0.530778] wake enabled for irq 165<br /> [ 0.530951] wake disabled for irq 165<br /> [ 0.531660] S5PV210 ADC driver, (c) 2010 Samsung Electronics<br /> [ 0.532269] Loaded driver for PL330 DMAC-0 s3c-pl330<br /> [ 0.532377] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32<br /> [ 0.532648] Loaded driver for PL330 DMAC-1 s3c-pl330<br /> [ 0.532753] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32<br /> [ 0.533026] Loaded driver for PL330 DMAC-2 s3c-pl330<br /> [ 0.533131] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32<br /> [ 0.534584] ashmem: initialized<br /> [ 0.534974] ROMFS MTD (C) 2007 Red Hat, Inc.<br /> [ 0.535085] yaffs built Jan 9 2011 19:39:48 Installing. <br /> [ 0.535300] msgmni has been set to 692<br /> [ 0.538418] alg: No test for stdrng (krng)<br /> [ 0.538685] io scheduler noop registered<br /> [ 0.538788] io scheduler deadline registered<br /> [ 0.538899] io scheduler cfq registered (default)<br /> [ 0.539661] s3cfb s3cfb: [fb2] dma: 0x43baf000, cpu: 0xe8800000, size: 0x002ee000<br /> [ 0.566146] FIMD src sclk = 166750000<br /> [ 0.566367] s3cfb s3cfb: registered successfully<br /> [ 0.567596] PA FB = 0x43BAF000, bits per pixel = 32<br /> [ 0.567788] screen width=480 height=800 va=0xd3baf000 pa=0x43baf000<br /> [ 0.567895] xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0<br /> [ 0.568082] fb_size=3072000<br /> [ 0.568193] Back frameBuffer[0].VAddr=d3d26000 PAddr=43d26000 size=1536000<br /> [ 0.568549] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10<br /> [ 0.568814] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10<br /> [ 0.569172] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10<br /> [ 0.574983] brd: module loaded<br /> [ 0.577800] loop: module loaded<br /> [ 0.577965] pmem: 1 init<br /> [ 0.578247] android_pmem: probe of android_pmem.0 failed with error -1<br /> [ 0.578370] pmem_gpu1: 1 init<br /> [ 0.578610] android_pmem: probe of android_pmem.1 failed with error -1<br /> [ 0.578813] pmem_adsp: 1 init<br /> [ 0.579052] android_pmem: probe of android_pmem.2 failed with error -1<br /> [ 0.579321] Android kernel panic handler initialized (bind=kpanic)<br /> [ 0.586194] Loading pn544 driver<br /> [ 0.586500] pn544_probe : requesting IRQ 44<br /> [ 0.586705] sec_jack_probe : Registering jack driver<br /> [ 0.587012] wake enabled for irq 38<br /> [ 0.588568] wake enabled for irq 167<br /> [ 0.589083] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [ 0.590749] [MODEM] bp_irq()<br /> [ 0.590965] wake enabled for irq 47<br /> [ 0.591067] wake enabled for irq 43<br /> [ 0.591878] Muxed OneNAND 512MB 1.8V 16-bit (0x50)<br /> [ 0.592066] OneNAND version = 0x013e<br /> [ 0.592166] Chip support all block unlock<br /> [ 0.592265] Chip has 4KiB pagesize<br /> [ 0.592462] Scanning device for bad blocks<br /> [ 0.594058] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [ 2.199914] Bad eraseblock 2047 at 0x1ffc0000<br /> [ 2.200105] Creating 7 MTD partitions on &quot;(null)&quot;:<br /> [ 2.200213] 0x000000000000-0x000000200000 : &quot;bootloader&quot;<br /> [ 2.201208] 0x0000004c0000-0x000000600000 : &quot;misc&quot;<br /> [ 2.202034] 0x000000600000-0x000000e00000 : &quot;boot&quot;<br /> [ 2.203081] 0x000000e00000-0x000001600000 : &quot;recovery&quot;<br /> [ 2.203991] 0x000001600000-0x00001eb80000 : &quot;cache&quot;<br /> [ 2.209164] 0x00001eb80000-0x00001f900000 : &quot;radio&quot;<br /> [ 2.210156] 0x00001f900000-0x00001ffc0000 : &quot;efs&quot;<br /> [ 2.355012] tl2796_probe successfully proved<br /> [ 2.355266] PPP generic driver version 2.4.2<br /> [ 2.355530] PPP Deflate Compression module registered<br /> [ 2.355635] PPP BSD Compression module registered<br /> [ 2.356631] PPP MPPE Compression module registered<br /> [ 2.356737] NET: Registered protocol family 24<br /> [ 2.358844] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics<br /> [ 2.358854] s3c-udc : version 15 March 2009 (DMA Mode)<br /> [ 2.359170] android init<br /> [ 2.359312] android_probe pdata: c056f6e8<br /> [ 2.359480] android_bind<br /> [ 2.359663] android_bind_config<br /> [ 2.359839] android_usb gadget: android_usb ready<br /> [ 2.375563] Registered gadget driver 'android_usb'<br /> [ 2.375798] f_adb init<br /> [ 2.375899] android_register_function adb<br /> [ 2.375999] f_mass_storage init<br /> [ 2.376227] fsg_probe pdev: c056ea88, pdata: c056f70c<br /> [ 2.376374] android_register_function usb_mass_storage<br /> [ 2.376560] f_rndis init<br /> [ 2.376736] android_register_function rndis<br /> [ 2.376844] rndis_function_bind_config MAC: 02:07:45:30:41:41<br /> [ 2.377047] android_usb gadget: using random self ethernet address<br /> [ 2.377159] android_usb gadget: using random host ethernet address<br /> [ 2.378247] usb0: MAC 9e:d8:8a:f7:15:2e<br /> [ 2.378375] usb0: HOST MAC 5a:70:67:a4:ba:91<br /> [ 2.378682] android_usb gadget: Mass Storage Function, version: 2009/09/11<br /> [ 2.378871] android_usb gadget: Number of LUNs=1<br /> [ 2.378976] lun0: LUN: removable file: (no medium)<br /> [ 2.379241] adb_bind_config<br /> [ 2.379780] mice: PS/2 mouse device common for all mice<br /> [ 2.380288] input: mxt224_ts_input as /devices/virtual/input/input0<br /> [ 2.421359] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171<br /> [ 2.500100] input: gyro as /devices/virtual/input/input1<br /> [ 2.500555] wake enabled for irq 166<br /> [ 2.500768] wake enabled for irq 169<br /> [ 2.500894] wake enabled for irq 170<br /> [ 2.500997] GPIO Input Driver: Start gpio inputs for herring-keypad in interrupt mode<br /> [ 2.501375] input: herring-keypad as /devices/virtual/input/input2<br /> [ 2.502040] input: proximity as /devices/virtual/input/input3<br /> [ 2.502610] input: lightsensor-level as /devices/virtual/input/input4<br /> [ 2.503190] S3C24XX RTC, (c) 2004,2006 Simtec Electronics<br /> [ 2.504051] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 2.504565] using rtc device, s3c, for alarms<br /> [ 2.504697] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0<br /> [ 2.504959] i2c /dev entries driver<br /> [ 2.506651] Linux video capture interface: v2.00<br /> [ 2.506915] mfc_init: &lt;6&gt;S5PC110 MFC Driver, (c) 2009 Samsung Electronics<br /> [ 2.506923] <br /> [ 2.507698] S3C JPEG Driver, (c) 2007 Samsung Electronics<br /> [ 2.507801] JPEG driver for S5PV210<br /> [ 2.509938] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02<br /> [ 2.510377] device-mapper: uevent: version 1.0.3<br /> [ 2.513590] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com<br /> [ 2.513711] Bluetooth: HCI UART driver ver 2.2<br /> [ 2.513897] Bluetooth: HCI H4 protocol initialized<br /> [ 2.514173] cpuidle: using governor ladder<br /> [ 2.514362] cpuidle: using governor menu<br /> [ 2.514598] sdhci: Secure Digital Host Controller Interface driver<br /> [ 2.514702] sdhci: Copyright(c) Pierre Ossman<br /> [ 2.515017] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)<br /> [ 2.515180] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)<br /> [ 2.515383] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)<br /> [ 2.515777] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA<br /> [ 2.515941] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)<br /> [ 2.516141] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)<br /> [ 2.516260] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)<br /> [ 2.516590] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA<br /> [ 2.517211] logger: created 64K log 'log_main'<br /> [ 2.517422] logger: created 256K log 'log_events'<br /> [ 2.517613] logger: created 64K log 'log_radio'<br /> [ 2.517882] logger: created 64K log 'log_system'<br /> [ 2.518280] No device for DAI WM8994 PAIFRX<br /> [ 2.518859] WM8994 Audio Codec 0.1<br /> [ 2.535546] s3c_idma_preallocate_buffer: VA-e8240000 PA-C0000000 163840bytes<br /> [ 2.535949] asoc: WM8994 PAIFRX &lt;-&gt; s5pc1xx-i2s mapping ok<br /> [ 2.536706] ALSA device list:<br /> [ 2.536810] #0: smdkc110 (WM8994)<br /> [ 2.536938] GACT probability NOT on<br /> [ 2.537049] Mirror/redirect action on<br /> [ 2.537151] u32 classifier<br /> [ 2.537249] Actions configured<br /> [ 2.537434] Netfilter messages via NETLINK v0.30.<br /> [ 2.537597] nf_conntrack version 0.5.0 (5539 buckets, 22156 max)<br /> [ 2.537954] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use<br /> [ 2.538060] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or<br /> [ 2.538248] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.<br /> [ 2.539160] ctnetlink v0.93: registering with nfnetlink.<br /> [ 2.539392] xt_time: kernel timezone is -0000<br /> [ 2.541812] ip_tables: (C) 2000-2006 Netfilter Core Team<br /> [ 2.542109] arp_tables: (C) 2002 David S. Miller<br /> [ 2.542288] TCP cubic registered<br /> [ 2.542532] NET: Registered protocol family 10<br /> [ 2.544658] lo: Disabled Privacy Extensions<br /> [ 2.551304] Mobile IPv6<br /> [ 2.551407] IPv6 over IPv4 tunneling driver<br /> [ 2.553354] sit0: Disabled Privacy Extensions<br /> [ 2.556762] ip6tnl0: Disabled Privacy Extensions<br /> [ 2.558531] NET: Registered protocol family 17<br /> [ 2.558663] NET: Registered protocol family 15<br /> [ 2.558931] Bluetooth: L2CAP ver 2.14<br /> [ 2.559121] Bluetooth: L2CAP socket layer initialized<br /> [ 2.559249] Bluetooth: SCO (Voice Link) ver 0.6<br /> [ 2.559452] Bluetooth: SCO socket layer initialized<br /> [ 2.559662] Bluetooth: RFCOMM TTY layer initialized<br /> [ 2.559782] Bluetooth: RFCOMM socket layer initialized<br /> [ 2.559971] Bluetooth: RFCOMM ver 1.11<br /> [ 2.560104] NET: Registered protocol family 35<br /> [ 2.560366] ThumbEE CPU extension supported.<br /> [ 2.561172] S5PV210 CPUFREQ Initialising...<br /> [ 2.561507] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2<br /> [ 2.564676] regulator_init_complete: disabling pd_mfc_supply<br /> [ 2.564871] regulator_init_complete: disabling pd_tv_supply<br /> [ 2.564978] regulator_init_complete: disabling pd_cam_supply<br /> [ 2.565458] input: cypress-touchkey as /devices/virtual/input/input5<br /> [ 2.593804] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x8, rev2 = 0x9<br /> [ 2.594535] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 2.594662] s3c-rtc s3c2410-rtc: setting system clock to 2011-01-10 09:05:14 UTC (1294650314)<br /> [ 2.596314] FIMC0 registered successfully<br /> [ 2.597738] FIMC1 registered successfully<br /> [ 2.599124] FIMC2 registered successfully<br /> [ 2.599349] max8998_charger_probe : MAX8998 Charger Driver Loading<br /> [ 2.601430] max8998_charger_probe : pmic interrupt registered<br /> [ 2.603022] wake enabled for irq 39<br /> [ 2.606738] Freeing init memory: 144K<br /> [ 2.641235] android_usb gadget: high speed config #1: android<br /> [ 2.939713] mmc0: new high speed MMC card at address 0001<br /> [ 2.942932] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <br /> [ 2.945588] mmcblk0: p1 (system) p2 (userdata) p3 (media)<br /> [ 31.552291] udev: starting version 161<br /> [ 38.494356] enabling adb<br /> [ 38.519296] adb_open<br /> [ 38.769864] android_usb gadget: high speed config #1: android<br /> [ 39.572320] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 39.580576] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 46.503316] ifb0: no IPv6 routers present<br /> [ 46.518943] ifb1: no IPv6 routers present<br /> [ 48.278996] [wm8994_crespo.c (wm8994_disable_path,841) ] Path[0] is not invaild!<br /> [ 48.279073] <br /> [3869.412157] max8998_int_work_func : pmic interrupt<br /> [3869.420131] s3c_cable_status_update : battery status discharging : 1<br /> [3920.108369] s3c_cable_status_update : battery status discharging : 1<br /> [3970.306487] s3c_cable_status_update : battery status discharging : 1<br /> [4020.536526] s3c_cable_status_update : battery status discharging : 1<br /> [4070.744176] s3c_cable_status_update : battery status discharging : 1<br /> [4120.854396] s3c_cable_status_update : battery status discharging : 1<br /> [4171.020661] s3c_cable_status_update : battery status discharging : 1<br /> [4221.475777] s3c_cable_status_update : battery status discharging : 1<br /> [4271.501492] s3c_cable_status_update : battery status discharging : 1<br /> [4321.833797] s3c_cable_status_update : battery status discharging : 1<br /> [4372.106644] s3c_cable_status_update : battery status discharging : 1<br /> [4422.130401] s3c_cable_status_update : battery status discharging : 1<br /> [4472.739646] s3c_cable_status_update : battery status discharging : 1<br /> [4522.828668] s3c_cable_status_update : battery status discharging : 1<br /> [4573.106049] s3c_cable_status_update : battery status discharging : 1<br /> [4623.349083] s3c_cable_status_update : battery status discharging : 1<br /> [5654.113443] fsa9480 7-0025: dev1: 0x0, dev2: 0x0<br /> [5654.129890] adb_release<br /> [5654.130659] adb_open<br /> [7460.779172] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [7461.064853] android_usb gadget: high speed config #1: android<br /> <br /> sh-4.0# du /sys/<br /> 0 /sys/fs/ext4<br /> 0 /sys/fs<br /> 0 /sys/devices/platform/power<br /> 0 /sys/devices/platform/power.0/power<br /> 0 /sys/devices/platform/power.0<br /> 0 /sys/devices/platform/watchdog/power<br /> 0 /sys/devices/platform/watchdog<br /> 0 /sys/devices/platform/fiq_debugger.2/power<br /> 0 /sys/devices/platform/fiq_debugger.2<br /> 0 /sys/devices/platform/s5pc110-onenand/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd<br /> 0 /sys/devices/platform/s5pc110-onenand<br /> 0 /sys/devices/platform/s3c2410-rtc/power<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc/rtc0/power<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc/rtc0<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc<br /> 0 /sys/devices/platform/s3c2410-rtc<br /> 0 /sys/devices/platform/gpio-event.0/power<br /> 0 /sys/devices/platform/gpio-event.0<br /> 0 /sys/devices/platform/s5pc1xx-iis.0/power<br /> 0 /sys/devices/platform/s5pc1xx-iis.0<br /> 0 /sys/devices/platform/s3c2410-wdt/power<br /> 0 /sys/devices/platform/s3c2410-wdt<br /> 0 /sys/devices/platform/s3cfb/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master/spi3/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master/spi3<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3<br /> 0 /sys/devices/platform/s3cfb/graphics/fb0/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb0<br /> 0 /sys/devices/platform/s3cfb/graphics/fb1/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb1<br /> 0 /sys/devices/platform/s3cfb/graphics/fb2/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb2<br /> 0 /sys/devices/platform/s3cfb/graphics/fb3/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb3<br /> 0 /sys/devices/platform/s3cfb/graphics/fb4/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb4<br /> 0 /sys/devices/platform/s3cfb/graphics<br /> 0 /sys/devices/platform/s3cfb<br /> 0 /sys/devices/platform/s3c-mfc/power<br /> 0 /sys/devices/platform/s3c-mfc<br /> 0 /sys/devices/platform/s3c-adc/power<br /> 0 /sys/devices/platform/s3c-adc<br /> 0 /sys/devices/platform/s3c-fimc.0/power<br /> 0 /sys/devices/platform/s3c-fimc.0<br /> 0 /sys/devices/platform/s3c-fimc.1/power<br /> 0 /sys/devices/platform/s3c-fimc.1<br /> 0 /sys/devices/platform/s3c-fimc.2/power<br /> 0 /sys/devices/platform/s3c-fimc.2<br /> 0 /sys/devices/platform/s3c-jpg/power<br /> 0 /sys/devices/platform/s3c-jpg<br /> 0 /sys/devices/platform/pvrsrvkm/power<br /> 0 /sys/devices/platform/pvrsrvkm<br /> 0 /sys/devices/platform/s3c_lcd/power<br /> 0 /sys/devices/platform/s3c_lcd<br /> 0 /sys/devices/platform/sec_jack.1/power<br /> 0 /sys/devices/platform/sec_jack.1<br /> 0 /sys/devices/platform/s3c2440-i2c.0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/0-0069/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/0-0069<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev/i2c-0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev/i2c-0<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0<br /> 0 /sys/devices/platform/s3c2440-i2c.0<br /> 0 /sys/devices/platform/s3c2440-i2c.1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-001c/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-001c<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-0009/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-0009<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev/i2c-1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev/i2c-1<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1<br /> 0 /sys/devices/platform/s3c2440-i2c.1<br /> 0 /sys/devices/platform/s3c2440-i2c.2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/2-004a/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/2-004a<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev/i2c-2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev/i2c-2<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2<br /> 0 /sys/devices/platform/s3c2440-i2c.2<br /> 0 /sys/devices/platform/i2c-gpio.4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/4-001a/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/4-001a<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev/i2c-4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev/i2c-4<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4<br /> 0 /sys/devices/platform/i2c-gpio.4<br /> 0 /sys/devices/platform/i2c-gpio.5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev/i2c-5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev/i2c-5<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5<br /> 0 /sys/devices/platform/i2c-gpio.5<br /> 0 /sys/devices/platform/i2c-gpio.6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.6<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.7/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.7<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.8/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.8<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.9/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.9<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.10/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.10<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.11/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.11<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.12/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.12<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.13/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.13<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.14/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.14<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.15/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.15<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.16/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.16<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.17/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.17<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.18/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.18<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.19/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.19<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.20/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.20<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.21/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.21<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.22/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.22<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/battery/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/battery<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/usb/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/usb<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/ac/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/ac<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0006/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0006<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev/i2c-6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev/i2c-6<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6<br /> 0 /sys/devices/platform/i2c-gpio.6<br /> 0 /sys/devices/platform/i2c-gpio.7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/7-0025/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/7-0025<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev/i2c-7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev/i2c-7<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7<br /> 0 /sys/devices/platform/i2c-gpio.7<br /> 0 /sys/devices/platform/i2c-gpio.8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev/i2c-8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev/i2c-8<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8<br /> 0 /sys/devices/platform/i2c-gpio.8<br /> 0 /sys/devices/platform/i2c-gpio.9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/9-0036/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/9-0036<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev/i2c-9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev/i2c-9<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9<br /> 0 /sys/devices/platform/i2c-gpio.9<br /> 0 /sys/devices/platform/i2c-gpio.11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/11-0044/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/11-0044<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev/i2c-11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev/i2c-11<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11<br /> 0 /sys/devices/platform/i2c-gpio.11<br /> 0 /sys/devices/platform/i2c-gpio.12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev/i2c-12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev/i2c-12<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12<br /> 0 /sys/devices/platform/i2c-gpio.12<br /> 0 /sys/devices/platform/i2c-gpio.14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/14-002b/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/14-002b<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev/i2c-14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev/i2c-14<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14<br /> 0 /sys/devices/platform/i2c-gpio.14<br /> 0 /sys/devices/platform/s3c-usbgadget/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0/statistics<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget<br /> 0 /sys/devices/platform/s3c-usbgadget<br /> 0 /sys/devices/platform/android_usb/power<br /> 0 /sys/devices/platform/android_usb<br /> 0 /sys/devices/platform/usb_mass_storage/power<br /> 0 /sys/devices/platform/usb_mass_storage/lun0/power<br /> 0 /sys/devices/platform/usb_mass_storage/lun0<br /> 0 /sys/devices/platform/usb_mass_storage<br /> 0 /sys/devices/platform/rndis/power<br /> 0 /sys/devices/platform/rndis<br /> 0 /sys/devices/platform/s3c-sdhci.0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/slaves<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/queue/iosched<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/queue<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host<br /> 0 /sys/devices/platform/s3c-sdhci.0<br /> 0 /sys/devices/platform/s3c-sdhci.3/power<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host/mmc1/power<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host/mmc1<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host<br /> 0 /sys/devices/platform/s3c-sdhci.3<br /> 0 /sys/devices/platform/sec-battery/power<br /> 0 /sys/devices/platform/sec-battery<br /> 0 /sys/devices/platform/i2c-gpio.10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/10-0020/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/10-0020<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev/i2c-10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev/i2c-10<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10<br /> 0 /sys/devices/platform/i2c-gpio.10<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator/regulator.0/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator/regulator.0<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator/regulator.1/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator/regulator.1<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator/regulator.2/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator/regulator.2<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator/regulator.3/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator/regulator.3<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator/regulator.4/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator/regulator.4<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator/regulator.5/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator/regulator.5<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5<br /> 0 /sys/devices/platform/android_pmem.0/power<br /> 0 /sys/devices/platform/android_pmem.0<br /> 0 /sys/devices/platform/android_pmem.1/power<br /> 0 /sys/devices/platform/android_pmem.1<br /> 0 /sys/devices/platform/android_pmem.2/power<br /> 0 /sys/devices/platform/android_pmem.2<br /> 0 /sys/devices/platform/s3c24xx-pwm.0/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.0<br /> 0 /sys/devices/platform/s3c24xx-pwm.1/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.1<br /> 0 /sys/devices/platform/s3c24xx-pwm.2/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.2<br /> 0 /sys/devices/platform/s3c24xx-pwm.3/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.3<br /> 0 /sys/devices/platform/bt_rfkill/power<br /> 0 /sys/devices/platform/bt_rfkill/rfkill/rfkill0/power<br /> 0 /sys/devices/platform/bt_rfkill/rfkill/rfkill0<br /> 0 /sys/devices/platform/bt_rfkill/rfkill<br /> 0 /sys/devices/platform/bt_rfkill<br /> 0 /sys/devices/platform/bt_sleep/power<br /> 0 /sys/devices/platform/bt_sleep<br /> 0 /sys/devices/platform/ram_console/power<br /> 0 /sys/devices/platform/ram_console<br /> 0 /sys/devices/platform/bcm4329_wlan.1/power<br /> 0 /sys/devices/platform/bcm4329_wlan.1<br /> 0 /sys/devices/platform/s3c-pl330.0/power<br /> 0 /sys/devices/platform/s3c-pl330.0<br /> 0 /sys/devices/platform/s3c-pl330.1/power<br /> 0 /sys/devices/platform/s3c-pl330.1<br /> 0 /sys/devices/platform/s3c-pl330.2/power<br /> 0 /sys/devices/platform/s3c-pl330.2<br /> 0 /sys/devices/platform/s5pv210-uart.0/power<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty/s3c2410_serial0/power<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty/s3c2410_serial0<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty<br /> 0 /sys/devices/platform/s5pv210-uart.0<br /> 0 /sys/devices/platform/s5pv210-uart.1/power<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty/s3c2410_serial1/power<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty/s3c2410_serial1<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty<br /> 0 /sys/devices/platform/s5pv210-uart.1<br /> 0 /sys/devices/platform/s5pv210-uart.3/power<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty/s3c2410_serial3/power<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty/s3c2410_serial3<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty<br /> 0 /sys/devices/platform/s5pv210-uart.3<br /> 0 /sys/devices/platform/modemctl/power<br /> 0 /sys/devices/platform/modemctl<br /> 0 /sys/devices/platform/alarm/power<br /> 0 /sys/devices/platform/alarm<br /> 0 /sys/devices/platform/soc-audio.0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0p/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0p<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0c/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0c<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/controlC0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/controlC0<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0<br /> 0 /sys/devices/platform/soc-audio.0/sound<br /> 0 /sys/devices/platform/soc-audio.0<br /> 0 /sys/devices/platform<br /> 0 /sys/devices/system/cpu/cpufreq/ondemand<br /> 0 /sys/devices/system/cpu/cpufreq<br /> 0 /sys/devices/system/cpu/cpuidle<br /> 0 /sys/devices/system/cpu/cpu0/cpuidle/state0<br /> 0 /sys/devices/system/cpu/cpu0/cpuidle<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq/stats<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq/ondemand<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq<br /> 0 /sys/devices/system/cpu/cpu0<br /> 0 /sys/devices/system/cpu<br /> 0 /sys/devices/system/s5pv210-core/s5pv210-core0<br /> 0 /sys/devices/system/s5pv210-core<br /> 0 /sys/devices/system/timer/timer0<br /> 0 /sys/devices/system/timer<br /> 0 /sys/devices/system/timekeeping/timekeeping0<br /> 0 /sys/devices/system/timekeeping<br /> 0 /sys/devices/system/clocksource/clocksource0<br /> 0 /sys/devices/system/clocksource<br /> 0 /sys/devices/system/vic/vic0<br /> 0 /sys/devices/system/vic/vic1<br /> 0 /sys/devices/system/vic/vic2<br /> 0 /sys/devices/system/vic/vic3<br /> 0 /sys/devices/system/vic<br /> 0 /sys/devices/system/vfp/vfp0<br /> 0 /sys/devices/system/vfp<br /> 0 /sys/devices/system<br /> 0 /sys/devices/virtual/gpio/gpiochip0/power<br /> 0 /sys/devices/virtual/gpio/gpiochip0<br /> 0 /sys/devices/virtual/gpio/gpiochip9/power<br /> 0 /sys/devices/virtual/gpio/gpiochip9<br /> 0 /sys/devices/virtual/gpio/gpiochip14/power<br /> 0 /sys/devices/virtual/gpio/gpiochip14<br /> 0 /sys/devices/virtual/gpio/gpiochip23/power<br /> 0 /sys/devices/virtual/gpio/gpiochip23<br /> 0 /sys/devices/virtual/gpio/gpiochip29/power<br /> 0 /sys/devices/virtual/gpio/gpiochip29<br /> 0 /sys/devices/virtual/gpio/gpiochip35/power<br /> 0 /sys/devices/virtual/gpio/gpiochip35<br /> 0 /sys/devices/virtual/gpio/gpiochip40/power<br /> 0 /sys/devices/virtual/gpio/gpiochip40<br /> 0 /sys/devices/virtual/gpio/gpiochip47/power<br /> 0 /sys/devices/virtual/gpio/gpiochip47<br /> 0 /sys/devices/virtual/gpio/gpiochip56/power<br /> 0 /sys/devices/virtual/gpio/gpiochip56<br /> 0 /sys/devices/virtual/gpio/gpiochip62/power<br /> 0 /sys/devices/virtual/gpio/gpiochip62<br /> 0 /sys/devices/virtual/gpio/gpiochip71/power<br /> 0 /sys/devices/virtual/gpio/gpiochip71<br /> 0 /sys/devices/virtual/gpio/gpiochip80/power<br /> 0 /sys/devices/virtual/gpio/gpiochip80<br /> 0 /sys/devices/virtual/gpio/gpiochip89/power<br /> 0 /sys/devices/virtual/gpio/gpiochip89<br /> 0 /sys/devices/virtual/gpio/gpiochip96/power<br /> 0 /sys/devices/virtual/gpio/gpiochip96<br /> 0 /sys/devices/virtual/gpio/gpiochip104/power<br /> 0 /sys/devices/virtual/gpio/gpiochip104<br /> 0 /sys/devices/virtual/gpio/gpiochip112/power<br /> 0 /sys/devices/virtual/gpio/gpiochip112<br /> 0 /sys/devices/virtual/gpio/gpiochip120/power<br /> 0 /sys/devices/virtual/gpio/gpiochip120<br /> 0 /sys/devices/virtual/gpio/gpiochip128/power<br /> 0 /sys/devices/virtual/gpio/gpiochip128<br /> 0 /sys/devices/virtual/gpio/gpiochip137/power<br /> 0 /sys/devices/virtual/gpio/gpiochip137<br /> 0 /sys/devices/virtual/gpio/gpiochip146/power<br /> 0 /sys/devices/virtual/gpio/gpiochip146<br /> 0 /sys/devices/virtual/gpio/gpiochip155/power<br /> 0 /sys/devices/virtual/gpio/gpiochip155<br /> 0 /sys/devices/virtual/gpio/gpiochip164/power<br /> 0 /sys/devices/virtual/gpio/gpiochip164<br /> 0 /sys/devices/virtual/gpio/gpiochip172/power<br /> 0 /sys/devices/virtual/gpio/gpiochip172<br /> 0 /sys/devices/virtual/gpio/gpiochip181/power<br /> 0 /sys/devices/virtual/gpio/gpiochip181<br /> 0 /sys/devices/virtual/gpio/gpiochip188/power<br /> 0 /sys/devices/virtual/gpio/gpiochip188<br /> 0 /sys/devices/virtual/gpio/gpiochip197/power<br /> 0 /sys/devices/virtual/gpio/gpiochip197<br /> 0 /sys/devices/virtual/gpio/gpiochip206/power<br /> 0 /sys/devices/virtual/gpio/gpiochip206<br /> 0 /sys/devices/virtual/gpio/gpiochip212/power<br /> 0 /sys/devices/virtual/gpio/gpiochip212<br /> 0 /sys/devices/virtual/gpio/gpiochip221/power<br /> 0 /sys/devices/virtual/gpio/gpiochip221<br /> 0 /sys/devices/virtual/gpio/gpiochip226/power<br /> 0 /sys/devices/virtual/gpio/gpiochip226<br /> 0 /sys/devices/virtual/gpio/gpiochip235/power<br /> 0 /sys/devices/virtual/gpio/gpiochip235<br /> 0 /sys/devices/virtual/gpio/gpiochip244/power<br /> 0 /sys/devices/virtual/gpio/gpiochip244<br /> 0 /sys/devices/virtual/gpio/gpiochip253/power<br /> 0 /sys/devices/virtual/gpio/gpiochip253<br /> 0 /sys/devices/virtual/gpio/gpiochip262/power<br /> 0 /sys/devices/virtual/gpio/gpiochip262<br /> 0 /sys/devices/virtual/gpio/gpiochip271/power<br /> 0 /sys/devices/virtual/gpio/gpiochip271<br /> 0 /sys/devices/virtual/gpio/gpiochip280/power<br /> 0 /sys/devices/virtual/gpio/gpiochip280<br /> 0 /sys/devices/virtual/gpio/gpiochip289/power<br /> 0 /sys/devices/virtual/gpio/gpiochip289<br /> 0 /sys/devices/virtual/gpio/gpiochip298/power<br /> 0 /sys/devices/virtual/gpio/gpiochip298<br /> 0 /sys/devices/virtual/gpio/gpiochip307/power<br /> 0 /sys/devices/virtual/gpio/gpiochip307<br /> 0 /sys/devices/virtual/gpio/gpiochip316/power<br /> 0 /sys/devices/virtual/gpio/gpiochip316<br /> 0 /sys/devices/virtual/gpio/gpiochip325/power<br /> 0 /sys/devices/virtual/gpio/gpiochip325<br /> 0 /sys/devices/virtual/gpio/gpiochip334/power<br /> 0 /sys/devices/virtual/gpio/gpiochip334<br /> 0 /sys/devices/virtual/gpio/gpiochip343/power<br /> 0 /sys/devices/virtual/gpio/gpiochip343<br /> 0 /sys/devices/virtual/gpio/gpiochip351/power<br /> 0 /sys/devices/virtual/gpio/gpiochip351<br /> 0 /sys/devices/virtual/gpio/gpiochip360/power<br /> 0 /sys/devices/virtual/gpio/gpiochip360<br /> 0 /sys/devices/virtual/gpio/gpiochip369/power<br /> 0 /sys/devices/virtual/gpio/gpiochip369<br /> 0 /sys/devices/virtual/gpio/gpiochip378/power<br /> 0 /sys/devices/virtual/gpio/gpiochip378<br /> 0 /sys/devices/virtual/gpio/gpiochip387/power<br /> 0 /sys/devices/virtual/gpio/gpiochip387<br /> 0 /sys/devices/virtual/gpio/gpiochip396/power<br /> 0 /sys/devices/virtual/gpio/gpiochip396<br /> 0 /sys/devices/virtual/gpio/gpiochip405/power<br /> 0 /sys/devices/virtual/gpio/gpiochip405<br /> 0 /sys/devices/virtual/gpio/gpiochip414/power<br /> 0 /sys/devices/virtual/gpio/gpiochip414<br /> 0 /sys/devices/virtual/gpio/gpiochip423/power<br /> 0 /sys/devices/virtual/gpio/gpiochip423<br /> 0 /sys/devices/virtual/gpio/gpiochip431/power<br /> 0 /sys/devices/virtual/gpio/gpiochip431<br /> 0 /sys/devices/virtual/gpio/gpiochip438/power<br /> 0 /sys/devices/virtual/gpio/gpiochip438<br /> 0 /sys/devices/virtual/gpio/gpiochip447/power<br /> 0 /sys/devices/virtual/gpio/gpiochip447<br /> 0 /sys/devices/virtual/gpio/gpiochip456/power<br /> 0 /sys/devices/virtual/gpio/gpiochip456<br /> 0 /sys/devices/virtual/gpio/gpio104/power<br /> 0 /sys/devices/virtual/gpio/gpio104<br /> 0 /sys/devices/virtual/gpio/gpio105/power<br /> 0 /sys/devices/virtual/gpio/gpio105<br /> 0 /sys/devices/virtual/gpio/gpio251/power<br /> 0 /sys/devices/virtual/gpio/gpio251<br /> 0 /sys/devices/virtual/gpio/gpio73/power<br /> 0 /sys/devices/virtual/gpio/gpio73<br /> 0 /sys/devices/virtual/gpio/gpio74/power<br /> 0 /sys/devices/virtual/gpio/gpio74<br /> 0 /sys/devices/virtual/gpio/gpio75/power<br /> 0 /sys/devices/virtual/gpio/gpio75<br /> 0 /sys/devices/virtual/gpio<br /> 0 /sys/devices/virtual/vtconsole/vtcon0/power<br /> 0 /sys/devices/virtual/vtconsole/vtcon0<br /> 0 /sys/devices/virtual/vtconsole<br /> 0 /sys/devices/virtual/tty/ttyFIQ0/power<br /> 0 /sys/devices/virtual/tty/ttyFIQ0<br /> 0 /sys/devices/virtual/tty/tty/power<br /> 0 /sys/devices/virtual/tty/tty<br /> 0 /sys/devices/virtual/tty/console/power<br /> 0 /sys/devices/virtual/tty/console<br /> 0 /sys/devices/virtual/tty/tty0/power<br /> 0 /sys/devices/virtual/tty/tty0<br /> 0 /sys/devices/virtual/tty/tty1/power<br /> 0 /sys/devices/virtual/tty/tty1<br /> 0 /sys/devices/virtual/tty/tty2/power<br /> 0 /sys/devices/virtual/tty/tty2<br /> 0 /sys/devices/virtual/tty/tty3/power<br /> 0 /sys/devices/virtual/tty/tty3<br /> 0 /sys/devices/virtual/tty/tty4/power<br /> 0 /sys/devices/virtual/tty/tty4<br /> 0 /sys/devices/virtual/tty/tty5/power<br /> 0 /sys/devices/virtual/tty/tty5<br /> 0 /sys/devices/virtual/tty/tty6/power<br /> 0 /sys/devices/virtual/tty/tty6<br /> 0 /sys/devices/virtual/tty/tty7/power<br /> 0 /sys/devices/virtual/tty/tty7<br /> 0 /sys/devices/virtual/tty/tty8/power<br /> 0 /sys/devices/virtual/tty/tty8<br /> 0 /sys/devices/virtual/tty/tty9/power<br /> 0 /sys/devices/virtual/tty/tty9<br /> 0 /sys/devices/virtual/tty/tty10/power<br /> 0 /sys/devices/virtual/tty/tty10<br /> 0 /sys/devices/virtual/tty/tty11/power<br /> 0 /sys/devices/virtual/tty/tty11<br /> 0 /sys/devices/virtual/tty/tty12/power<br /> 0 /sys/devices/virtual/tty/tty12<br /> 0 /sys/devices/virtual/tty/tty13/power<br /> 0 /sys/devices/virtual/tty/tty13<br /> 0 /sys/devices/virtual/tty/tty14/power<br /> 0 /sys/devices/virtual/tty/tty14<br /> 0 /sys/devices/virtual/tty/tty15/power<br /> 0 /sys/devices/virtual/tty/tty15<br /> 0 /sys/devices/virtual/tty/tty16/power<br /> 0 /sys/devices/virtual/tty/tty16<br /> 0 /sys/devices/virtual/tty/tty17/power<br /> 0 /sys/devices/virtual/tty/tty17<br /> 0 /sys/devices/virtual/tty/tty18/power<br /> 0 /sys/devices/virtual/tty/tty18<br /> 0 /sys/devices/virtual/tty/tty19/power<br /> 0 /sys/devices/virtual/tty/tty19<br /> 0 /sys/devices/virtual/tty/tty20/power<br /> 0 /sys/devices/virtual/tty/tty20<br /> 0 /sys/devices/virtual/tty/tty21/power<br /> 0 /sys/devices/virtual/tty/tty21<br /> 0 /sys/devices/virtual/tty/tty22/power<br /> 0 /sys/devices/virtual/tty/tty22<br /> 0 /sys/devices/virtual/tty/tty23/power<br /> 0 /sys/devices/virtual/tty/tty23<br /> 0 /sys/devices/virtual/tty/tty24/power<br /> 0 /sys/devices/virtual/tty/tty24<br /> 0 /sys/devices/virtual/tty/tty25/power<br /> 0 /sys/devices/virtual/tty/tty25<br /> 0 /sys/devices/virtual/tty/tty26/power<br /> 0 /sys/devices/virtual/tty/tty26<br /> 0 /sys/devices/virtual/tty/tty27/power<br /> 0 /sys/devices/virtual/tty/tty27<br /> 0 /sys/devices/virtual/tty/tty28/power<br /> 0 /sys/devices/virtual/tty/tty28<br /> 0 /sys/devices/virtual/tty/tty29/power<br /> 0 /sys/devices/virtual/tty/tty29<br /> 0 /sys/devices/virtual/tty/tty30/power<br /> 0 /sys/devices/virtual/tty/tty30<br /> 0 /sys/devices/virtual/tty/tty31/power<br /> 0 /sys/devices/virtual/tty/tty31<br /> 0 /sys/devices/virtual/tty/tty32/power<br /> 0 /sys/devices/virtual/tty/tty32<br /> 0 /sys/devices/virtual/tty/tty33/power<br /> 0 /sys/devices/virtual/tty/tty33<br /> 0 /sys/devices/virtual/tty/tty34/power<br /> 0 /sys/devices/virtual/tty/tty34<br /> 0 /sys/devices/virtual/tty/tty35/power<br /> 0 /sys/devices/virtual/tty/tty35<br /> 0 /sys/devices/virtual/tty/tty36/power<br /> 0 /sys/devices/virtual/tty/tty36<br /> 0 /sys/devices/virtual/tty/tty37/power<br /> 0 /sys/devices/virtual/tty/tty37<br /> 0 /sys/devices/virtual/tty/tty38/power<br /> 0 /sys/devices/virtual/tty/tty38<br /> 0 /sys/devices/virtual/tty/tty39/power<br /> 0 /sys/devices/virtual/tty/tty39<br /> 0 /sys/devices/virtual/tty/tty40/power<br /> 0 /sys/devices/virtual/tty/tty40<br /> 0 /sys/devices/virtual/tty/tty41/power<br /> 0 /sys/devices/virtual/tty/tty41<br /> 0 /sys/devices/virtual/tty/tty42/power<br /> 0 /sys/devices/virtual/tty/tty42<br /> 0 /sys/devices/virtual/tty/tty43/power<br /> 0 /sys/devices/virtual/tty/tty43<br /> 0 /sys/devices/virtual/tty/tty44/power<br /> 0 /sys/devices/virtual/tty/tty44<br /> 0 /sys/devices/virtual/tty/tty45/power<br /> 0 /sys/devices/virtual/tty/tty45<br /> 0 /sys/devices/virtual/tty/tty46/power<br /> 0 /sys/devices/virtual/tty/tty46<br /> 0 /sys/devices/virtual/tty/tty47/power<br /> 0 /sys/devices/virtual/tty/tty47<br /> 0 /sys/devices/virtual/tty/tty48/power<br /> 0 /sys/devices/virtual/tty/tty48<br /> 0 /sys/devices/virtual/tty/tty49/power<br /> 0 /sys/devices/virtual/tty/tty49<br /> 0 /sys/devices/virtual/tty/tty50/power<br /> 0 /sys/devices/virtual/tty/tty50<br /> 0 /sys/devices/virtual/tty/tty51/power<br /> 0 /sys/devices/virtual/tty/tty51<br /> 0 /sys/devices/virtual/tty/tty52/power<br /> 0 /sys/devices/virtual/tty/tty52<br /> 0 /sys/devices/virtual/tty/tty53/power<br /> 0 /sys/devices/virtual/tty/tty53<br /> 0 /sys/devices/virtual/tty/tty54/power<br /> 0 /sys/devices/virtual/tty/tty54<br /> 0 /sys/devices/virtual/tty/tty55/power<br /> 0 /sys/devices/virtual/tty/tty55<br /> 0 /sys/devices/virtual/tty/tty56/power<br /> 0 /sys/devices/virtual/tty/tty56<br /> 0 /sys/devices/virtual/tty/tty57/power<br /> 0 /sys/devices/virtual/tty/tty57<br /> 0 /sys/devices/virtual/tty/tty58/power<br /> 0 /sys/devices/virtual/tty/tty58<br /> 0 /sys/devices/virtual/tty/tty59/power<br /> 0 /sys/devices/virtual/tty/tty59<br /> 0 /sys/devices/virtual/tty/tty60/power<br /> 0 /sys/devices/virtual/tty/tty60<br /> 0 /sys/devices/virtual/tty/tty61/power<br /> 0 /sys/devices/virtual/tty/tty61<br /> 0 /sys/devices/virtual/tty/tty62/power<br /> 0 /sys/devices/virtual/tty/tty62<br /> 0 /sys/devices/virtual/tty/tty63/power<br /> 0 /sys/devices/virtual/tty/tty63<br /> 0 /sys/devices/virtual/tty/ptmx/power<br /> 0 /sys/devices/virtual/tty/ptmx<br /> 0 /sys/devices/virtual/tty<br /> 0 /sys/devices/virtual/sec/switch/power<br /> 0 /sys/devices/virtual/sec/switch<br /> 0 /sys/devices/virtual/sec/gps/power<br /> 0 /sys/devices/virtual/sec/gps<br /> 0 /sys/devices/virtual/sec/uart_switch/power<br /> 0 /sys/devices/virtual/sec/uart_switch<br /> 0 /sys/devices/virtual/sec<br /> 0 /sys/devices/virtual/bdi/default/power<br /> 0 /sys/devices/virtual/bdi/default<br /> 0 /sys/devices/virtual/bdi/1:0/power<br /> 0 /sys/devices/virtual/bdi/1:0<br /> 0 /sys/devices/virtual/bdi/1:1/power<br /> 0 /sys/devices/virtual/bdi/1:1<br /> 0 /sys/devices/virtual/bdi/1:2/power<br /> 0 /sys/devices/virtual/bdi/1:2<br /> 0 /sys/devices/virtual/bdi/1:3/power<br /> 0 /sys/devices/virtual/bdi/1:3<br /> 0 /sys/devices/virtual/bdi/1:4/power<br /> 0 /sys/devices/virtual/bdi/1:4<br /> 0 /sys/devices/virtual/bdi/1:5/power<br /> 0 /sys/devices/virtual/bdi/1:5<br /> 0 /sys/devices/virtual/bdi/1:6/power<br /> 0 /sys/devices/virtual/bdi/1:6<br /> 0 /sys/devices/virtual/bdi/1:7/power<br /> 0 /sys/devices/virtual/bdi/1:7<br /> 0 /sys/devices/virtual/bdi/1:8/power<br /> 0 /sys/devices/virtual/bdi/1:8<br /> 0 /sys/devices/virtual/bdi/1:9/power<br /> 0 /sys/devices/virtual/bdi/1:9<br /> 0 /sys/devices/virtual/bdi/1:10/power<br /> 0 /sys/devices/virtual/bdi/1:10<br /> 0 /sys/devices/virtual/bdi/1:11/power<br /> 0 /sys/devices/virtual/bdi/1:11<br /> 0 /sys/devices/virtual/bdi/1:12/power<br /> 0 /sys/devices/virtual/bdi/1:12<br /> 0 /sys/devices/virtual/bdi/1:13/power<br /> 0 /sys/devices/virtual/bdi/1:13<br /> 0 /sys/devices/virtual/bdi/1:14/power<br /> 0 /sys/devices/virtual/bdi/1:14<br /> 0 /sys/devices/virtual/bdi/1:15/power<br /> 0 /sys/devices/virtual/bdi/1:15<br /> 0 /sys/devices/virtual/bdi/7:0/power<br /> 0 /sys/devices/virtual/bdi/7:0<br /> 0 /sys/devices/virtual/bdi/7:1/power<br /> 0 /sys/devices/virtual/bdi/7:1<br /> 0 /sys/devices/virtual/bdi/7:2/power<br /> 0 /sys/devices/virtual/bdi/7:2<br /> 0 /sys/devices/virtual/bdi/7:3/power<br /> 0 /sys/devices/virtual/bdi/7:3<br /> 0 /sys/devices/virtual/bdi/7:4/power<br /> 0 /sys/devices/virtual/bdi/7:4<br /> 0 /sys/devices/virtual/bdi/7:5/power<br /> 0 /sys/devices/virtual/bdi/7:5<br /> 0 /sys/devices/virtual/bdi/7:6/power<br /> 0 /sys/devices/virtual/bdi/7:6<br /> 0 /sys/devices/virtual/bdi/7:7/power<br /> 0 /sys/devices/virtual/bdi/7:7<br /> 0 /sys/devices/virtual/bdi/mtd-unmap/power<br /> 0 /sys/devices/virtual/bdi/mtd-unmap<br /> 0 /sys/devices/virtual/bdi/mtd-romap/power<br /> 0 /sys/devices/virtual/bdi/mtd-romap<br /> 0 /sys/devices/virtual/bdi/mtd-rwmap/power<br /> 0 /sys/devices/virtual/bdi/mtd-rwmap<br /> 0 /sys/devices/virtual/bdi/31:0/power<br /> 0 /sys/devices/virtual/bdi/31:0<br /> 0 /sys/devices/virtual/bdi/31:1/power<br /> 0 /sys/devices/virtual/bdi/31:1<br /> 0 /sys/devices/virtual/bdi/31:2/power<br /> 0 /sys/devices/virtual/bdi/31:2<br /> 0 /sys/devices/virtual/bdi/31:3/power<br /> 0 /sys/devices/virtual/bdi/31:3<br /> 0 /sys/devices/virtual/bdi/31:4/power<br /> 0 /sys/devices/virtual/bdi/31:4<br /> 0 /sys/devices/virtual/bdi/31:5/power<br /> 0 /sys/devices/virtual/bdi/31:5<br /> 0 /sys/devices/virtual/bdi/31:6/power<br /> 0 /sys/devices/virtual/bdi/31:6<br /> 0 /sys/devices/virtual/bdi/179:0/power<br /> 0 /sys/devices/virtual/bdi/179:0<br /> 0 /sys/devices/virtual/bdi<br /> 0 /sys/devices/virtual/net/lo/statistics<br /> 0 /sys/devices/virtual/net/lo/power<br /> 0 /sys/devices/virtual/net/lo<br /> 0 /sys/devices/virtual/net/rmnet0/statistics<br /> 0 /sys/devices/virtual/net/rmnet0/power<br /> 0 /sys/devices/virtual/net/rmnet0<br /> 0 /sys/devices/virtual/net/ifb0/statistics<br /> 0 /sys/devices/virtual/net/ifb0/power<br /> 0 /sys/devices/virtual/net/ifb0<br /> 0 /sys/devices/virtual/net/ifb1/statistics<br /> 0 /sys/devices/virtual/net/ifb1/power<br /> 0 /sys/devices/virtual/net/ifb1<br /> 0 /sys/devices/virtual/net/sit0/statistics<br /> 0 /sys/devices/virtual/net/sit0/power<br /> 0 /sys/devices/virtual/net/sit0<br /> 0 /sys/devices/virtual/net/ip6tnl0/statistics<br /> 0 /sys/devices/virtual/net/ip6tnl0/power<br /> 0 /sys/devices/virtual/net/ip6tnl0<br /> 0 /sys/devices/virtual/net<br /> 0 /sys/devices/virtual/misc/rfkill/power<br /> 0 /sys/devices/virtual/misc/rfkill<br /> 0 /sys/devices/virtual/misc/adc/power<br /> 0 /sys/devices/virtual/misc/adc<br /> 0 /sys/devices/virtual/misc/ashmem/power<br /> 0 /sys/devices/virtual/misc/ashmem<br /> 0 /sys/devices/virtual/misc/apm_bios/power<br /> 0 /sys/devices/virtual/misc/apm_bios<br /> 0 /sys/devices/virtual/misc/akm8973/power<br /> 0 /sys/devices/virtual/misc/akm8973<br /> 0 /sys/devices/virtual/misc/accelerometer/power<br /> 0 /sys/devices/virtual/misc/accelerometer<br /> 0 /sys/devices/virtual/misc/pn544/power<br /> 0 /sys/devices/virtual/misc/pn544<br /> 0 /sys/devices/virtual/misc/modem_ctl/power<br /> 0 /sys/devices/virtual/misc/modem_ctl<br /> 0 /sys/devices/virtual/misc/modem_fmt/power<br /> 0 /sys/devices/virtual/misc/modem_fmt<br /> 0 /sys/devices/virtual/misc/modem_rfs/power<br /> 0 /sys/devices/virtual/misc/modem_rfs<br /> 0 /sys/devices/virtual/misc/android_adb/power<br /> 0 /sys/devices/virtual/misc/android_adb<br /> 0 /sys/devices/virtual/misc/android_adb_enable/power<br /> 0 /sys/devices/virtual/misc/android_adb_enable<br /> 0 /sys/devices/virtual/misc/psaux/power<br /> 0 /sys/devices/virtual/misc/psaux<br /> 0 /sys/devices/virtual/misc/keychord/power<br /> 0 /sys/devices/virtual/misc/keychord<br /> 0 /sys/devices/virtual/misc/uinput/power<br /> 0 /sys/devices/virtual/misc/uinput<br /> 0 /sys/devices/virtual/misc/alarm/power<br /> 0 /sys/devices/virtual/misc/alarm<br /> 0 /sys/devices/virtual/misc/s3c-mfc/power<br /> 0 /sys/devices/virtual/misc/s3c-mfc<br /> 0 /sys/devices/virtual/misc/s3c-jpg/power<br /> 0 /sys/devices/virtual/misc/s3c-jpg<br /> 0 /sys/devices/virtual/misc/device-mapper/power<br /> 0 /sys/devices/virtual/misc/device-mapper<br /> 0 /sys/devices/virtual/misc/binder/power<br /> 0 /sys/devices/virtual/misc/binder<br /> 0 /sys/devices/virtual/misc/log_main/power<br /> 0 /sys/devices/virtual/misc/log_main<br /> 0 /sys/devices/virtual/misc/log_events/power<br /> 0 /sys/devices/virtual/misc/log_events<br /> 0 /sys/devices/virtual/misc/log_radio/power<br /> 0 /sys/devices/virtual/misc/log_radio<br /> 0 /sys/devices/virtual/misc/log_system/power<br /> 0 /sys/devices/virtual/misc/log_system<br /> 0 /sys/devices/virtual/misc/cpu_dma_latency/power<br /> 0 /sys/devices/virtual/misc/cpu_dma_latency<br /> 0 /sys/devices/virtual/misc/network_latency/power<br /> 0 /sys/devices/virtual/misc/network_latency<br /> 0 /sys/devices/virtual/misc/network_throughput/power<br /> 0 /sys/devices/virtual/misc/network_throughput<br /> 0 /sys/devices/virtual/misc<br /> 0 /sys/devices/virtual/mem/mem/power<br /> 0 /sys/devices/virtual/mem/mem<br /> 0 /sys/devices/virtual/mem/kmem/power<br /> 0 /sys/devices/virtual/mem/kmem<br /> 0 /sys/devices/virtual/mem/null/power<br /> 0 /sys/devices/virtual/mem/null<br /> 0 /sys/devices/virtual/mem/zero/power<br /> 0 /sys/devices/virtual/mem/zero<br /> 0 /sys/devices/virtual/mem/full/power<br /> 0 /sys/devices/virtual/mem/full<br /> 0 /sys/devices/virtual/mem/random/power<br /> 0 /sys/devices/virtual/mem/random<br /> 0 /sys/devices/virtual/mem/urandom/power<br /> 0 /sys/devices/virtual/mem/urandom<br /> 0 /sys/devices/virtual/mem/kmsg/power<br /> 0 /sys/devices/virtual/mem/kmsg<br /> 0 /sys/devices/virtual/mem/s3c-mem/power<br /> 0 /sys/devices/virtual/mem/s3c-mem<br /> 0 /sys/devices/virtual/mem<br /> 0 /sys/devices/virtual/vc/vcs/power<br /> 0 /sys/devices/virtual/vc/vcs<br /> 0 /sys/devices/virtual/vc/vcsa/power<br /> 0 /sys/devices/virtual/vc/vcsa<br /> 0 /sys/devices/virtual/vc/vcs1/power<br /> 0 /sys/devices/virtual/vc/vcs1<br /> 0 /sys/devices/virtual/vc/vcsa1/power<br /> 0 /sys/devices/virtual/vc/vcsa1<br /> 0 /sys/devices/virtual/vc/vcs2/power<br /> 0 /sys/devices/virtual/vc/vcs2<br /> 0 /sys/devices/virtual/vc/vcsa2/power<br /> 0 /sys/devices/virtual/vc/vcsa2<br /> 0 /sys/devices/virtual/vc<br /> 0 /sys/devices/virtual/timed_output/vibrator/power<br /> 0 /sys/devices/virtual/timed_output/vibrator<br /> 0 /sys/devices/virtual/timed_output<br /> 0 /sys/devices/virtual/pvr/pvrsrvkm/power<br /> 0 /sys/devices/virtual/pvr/pvrsrvkm<br /> 0 /sys/devices/virtual/pvr<br /> 0 /sys/devices/virtual/block/ram0/power<br /> 0 /sys/devices/virtual/block/ram0/holders<br /> 0 /sys/devices/virtual/block/ram0/slaves<br /> 0 /sys/devices/virtual/block/ram0/queue<br /> 0 /sys/devices/virtual/block/ram0<br /> 0 /sys/devices/virtual/block/ram1/power<br /> 0 /sys/devices/virtual/block/ram1/holders<br /> 0 /sys/devices/virtual/block/ram1/slaves<br /> 0 /sys/devices/virtual/block/ram1/queue<br /> 0 /sys/devices/virtual/block/ram1<br /> 0 /sys/devices/virtual/block/ram2/power<br /> 0 /sys/devices/virtual/block/ram2/holders<br /> 0 /sys/devices/virtual/block/ram2/slaves<br /> 0 /sys/devices/virtual/block/ram2/queue<br /> 0 /sys/devices/virtual/block/ram2<br /> 0 /sys/devices/virtual/block/ram3/power<br /> 0 /sys/devices/virtual/block/ram3/holders<br /> 0 /sys/devices/virtual/block/ram3/slaves<br /> 0 /sys/devices/virtual/block/ram3/queue<br /> 0 /sys/devices/virtual/block/ram3<br /> 0 /sys/devices/virtual/block/ram4/power<br /> 0 /sys/devices/virtual/block/ram4/holders<br /> 0 /sys/devices/virtual/block/ram4/slaves<br /> 0 /sys/devices/virtual/block/ram4/queue<br /> 0 /sys/devices/virtual/block/ram4<br /> 0 /sys/devices/virtual/block/ram5/power<br /> 0 /sys/devices/virtual/block/ram5/holders<br /> 0 /sys/devices/virtual/block/ram5/slaves<br /> 0 /sys/devices/virtual/block/ram5/queue<br /> 0 /sys/devices/virtual/block/ram5<br /> 0 /sys/devices/virtual/block/ram6/power<br /> 0 /sys/devices/virtual/block/ram6/holders<br /> 0 /sys/devices/virtual/block/ram6/slaves<br /> 0 /sys/devices/virtual/block/ram6/queue<br /> 0 /sys/devices/virtual/block/ram6<br /> 0 /sys/devices/virtual/block/ram7/power<br /> 0 /sys/devices/virtual/block/ram7/holders<br /> 0 /sys/devices/virtual/block/ram7/slaves<br /> 0 /sys/devices/virtual/block/ram7/queue<br /> 0 /sys/devices/virtual/block/ram7<br /> 0 /sys/devices/virtual/block/ram8/power<br /> 0 /sys/devices/virtual/block/ram8/holders<br /> 0 /sys/devices/virtual/block/ram8/slaves<br /> 0 /sys/devices/virtual/block/ram8/queue<br /> 0 /sys/devices/virtual/block/ram8<br /> 0 /sys/devices/virtual/block/ram9/power<br /> 0 /sys/devices/virtual/block/ram9/holders<br /> 0 /sys/devices/virtual/block/ram9/slaves<br /> 0 /sys/devices/virtual/block/ram9/queue<br /> 0 /sys/devices/virtual/block/ram9<br /> 0 /sys/devices/virtual/block/ram10/power<br /> 0 /sys/devices/virtual/block/ram10/holders<br /> 0 /sys/devices/virtual/block/ram10/slaves<br /> 0 /sys/devices/virtual/block/ram10/queue<br /> 0 /sys/devices/virtual/block/ram10<br /> 0 /sys/devices/virtual/block/ram11/power<br /> 0 /sys/devices/virtual/block/ram11/holders<br /> 0 /sys/devices/virtual/block/ram11/slaves<br /> 0 /sys/devices/virtual/block/ram11/queue<br /> 0 /sys/devices/virtual/block/ram11<br /> 0 /sys/devices/virtual/block/ram12/power<br /> 0 /sys/devices/virtual/block/ram12/holders<br /> 0 /sys/devices/virtual/block/ram12/slaves<br /> 0 /sys/devices/virtual/block/ram12/queue<br /> 0 /sys/devices/virtual/block/ram12<br /> 0 /sys/devices/virtual/block/ram13/power<br /> 0 /sys/devices/virtual/block/ram13/holders<br /> 0 /sys/devices/virtual/block/ram13/slaves<br /> 0 /sys/devices/virtual/block/ram13/queue<br /> 0 /sys/devices/virtual/block/ram13<br /> 0 /sys/devices/virtual/block/ram14/power<br /> 0 /sys/devices/virtual/block/ram14/holders<br /> 0 /sys/devices/virtual/block/ram14/slaves<br /> 0 /sys/devices/virtual/block/ram14/queue<br /> 0 /sys/devices/virtual/block/ram14<br /> 0 /sys/devices/virtual/block/ram15/power<br /> 0 /sys/devices/virtual/block/ram15/holders<br /> 0 /sys/devices/virtual/block/ram15/slaves<br /> 0 /sys/devices/virtual/block/ram15/queue<br /> 0 /sys/devices/virtual/block/ram15<br /> 0 /sys/devices/virtual/block/loop0/power<br /> 0 /sys/devices/virtual/block/loop0/holders<br /> 0 /sys/devices/virtual/block/loop0/slaves<br /> 0 /sys/devices/virtual/block/loop0/queue<br /> 0 /sys/devices/virtual/block/loop0<br /> 0 /sys/devices/virtual/block/loop1/power<br /> 0 /sys/devices/virtual/block/loop1/holders<br /> 0 /sys/devices/virtual/block/loop1/slaves<br /> 0 /sys/devices/virtual/block/loop1/queue<br /> 0 /sys/devices/virtual/block/loop1<br /> 0 /sys/devices/virtual/block/loop2/power<br /> 0 /sys/devices/virtual/block/loop2/holders<br /> 0 /sys/devices/virtual/block/loop2/slaves<br /> 0 /sys/devices/virtual/block/loop2/queue<br /> 0 /sys/devices/virtual/block/loop2<br /> 0 /sys/devices/virtual/block/loop3/power<br /> 0 /sys/devices/virtual/block/loop3/holders<br /> 0 /sys/devices/virtual/block/loop3/slaves<br /> 0 /sys/devices/virtual/block/loop3/queue<br /> 0 /sys/devices/virtual/block/loop3<br /> 0 /sys/devices/virtual/block/loop4/power<br /> 0 /sys/devices/virtual/block/loop4/holders<br /> 0 /sys/devices/virtual/block/loop4/slaves<br /> 0 /sys/devices/virtual/block/loop4/queue<br /> 0 /sys/devices/virtual/block/loop4<br /> 0 /sys/devices/virtual/block/loop5/power<br /> 0 /sys/devices/virtual/block/loop5/holders<br /> 0 /sys/devices/virtual/block/loop5/slaves<br /> 0 /sys/devices/virtual/block/loop5/queue<br /> 0 /sys/devices/virtual/block/loop5<br /> 0 /sys/devices/virtual/block/loop6/power<br /> 0 /sys/devices/virtual/block/loop6/holders<br /> 0 /sys/devices/virtual/block/loop6/slaves<br /> 0 /sys/devices/virtual/block/loop6/queue<br /> 0 /sys/devices/virtual/block/loop6<br /> 0 /sys/devices/virtual/block/loop7/power<br /> 0 /sys/devices/virtual/block/loop7/holders<br /> 0 /sys/devices/virtual/block/loop7/slaves<br /> 0 /sys/devices/virtual/block/loop7/queue<br /> 0 /sys/devices/virtual/block/loop7<br /> 0 /sys/devices/virtual/block<br /> 0 /sys/devices/virtual/switch/h2w/power<br /> 0 /sys/devices/virtual/switch/h2w<br /> 0 /sys/devices/virtual/switch/dock/power<br /> 0 /sys/devices/virtual/switch/dock<br /> 0 /sys/devices/virtual/switch/usb_configuration/power<br /> 0 /sys/devices/virtual/switch/usb_configuration<br /> 0 /sys/devices/virtual/switch<br /> 0 /sys/devices/virtual/ppp/ppp/power<br /> 0 /sys/devices/virtual/ppp/ppp<br /> 0 /sys/devices/virtual/ppp<br /> 0 /sys/devices/virtual/usb_composite/rndis/power<br /> 0 /sys/devices/virtual/usb_composite/rndis<br /> 0 /sys/devices/virtual/usb_composite/usb_mass_storage/power<br /> 0 /sys/devices/virtual/usb_composite/usb_mass_storage<br /> 0 /sys/devices/virtual/usb_composite/adb/power<br /> 0 /sys/devices/virtual/usb_composite/adb<br /> 0 /sys/devices/virtual/usb_composite<br /> 0 /sys/devices/virtual/input/mice/power<br /> 0 /sys/devices/virtual/input/mice<br /> 0 /sys/devices/virtual/input/input0/id<br /> 0 /sys/devices/virtual/input/input0/capabilities<br /> 0 /sys/devices/virtual/input/input0/power<br /> 0 /sys/devices/virtual/input/input0/event0/power<br /> 0 /sys/devices/virtual/input/input0/event0<br /> 0 /sys/devices/virtual/input/input0<br /> 0 /sys/devices/virtual/input/input1/id<br /> 0 /sys/devices/virtual/input/input1/capabilities<br /> 0 /sys/devices/virtual/input/input1/power<br /> 0 /sys/devices/virtual/input/input1/event1/power<br /> 0 /sys/devices/virtual/input/input1/event1<br /> 0 /sys/devices/virtual/input/input1<br /> 0 /sys/devices/virtual/input/input2/id<br /> 0 /sys/devices/virtual/input/input2/capabilities<br /> 0 /sys/devices/virtual/input/input2/power<br /> 0 /sys/devices/virtual/input/input2/event2/power<br /> 0 /sys/devices/virtual/input/input2/event2<br /> 0 /sys/devices/virtual/input/input2<br /> 0 /sys/devices/virtual/input/input3/id<br /> 0 /sys/devices/virtual/input/input3/capabilities<br /> 0 /sys/devices/virtual/input/input3/power<br /> 0 /sys/devices/virtual/input/input3/event3/power<br /> 0 /sys/devices/virtual/input/input3/event3<br /> 0 /sys/devices/virtual/input/input3<br /> 0 /sys/devices/virtual/input/input4/id<br /> 0 /sys/devices/virtual/input/input4/capabilities<br /> 0 /sys/devices/virtual/input/input4/power<br /> 0 /sys/devices/virtual/input/input4/event4/power<br /> 0 /sys/devices/virtual/input/input4/event4<br /> 0 /sys/devices/virtual/input/input4<br /> 0 /sys/devices/virtual/input/input5/id<br /> 0 /sys/devices/virtual/input/input5/capabilities<br /> 0 /sys/devices/virtual/input/input5/power<br /> 0 /sys/devices/virtual/input/input5/event5/power<br /> 0 /sys/devices/virtual/input/input5/event5<br /> 0 /sys/devices/virtual/input/input5<br /> 0 /sys/devices/virtual/input<br /> 0 /sys/devices/virtual/sound/timer/power<br /> 0 /sys/devices/virtual/sound/timer<br /> 0 /sys/devices/virtual/sound<br /> 0 /sys/devices/virtual/video4linux/video0/power<br /> 0 /sys/devices/virtual/video4linux/video0<br /> 0 /sys/devices/virtual/video4linux/video1/power<br /> 0 /sys/devices/virtual/video4linux/video1<br /> 0 /sys/devices/virtual/video4linux/video2/power<br /> 0 /sys/devices/virtual/video4linux/video2<br /> 0 /sys/devices/virtual/video4linux<br /> 0 /sys/devices/virtual<br /> 0 /sys/devices<br /> 0 /sys/dev/block<br /> 0 /sys/dev/char<br /> 0 /sys/dev<br /> 0 /sys/bus/platform/devices<br /> 0 /sys/bus/platform/drivers/power<br /> 0 /sys/bus/platform/drivers/fiq_debugger<br /> 0 /sys/bus/platform/drivers/ram_console<br /> 0 /sys/bus/platform/drivers/s3c24xx-pwm<br /> 0 /sys/bus/platform/drivers/reg-s5pv210-pd<br /> 0 /sys/bus/platform/drivers/max8998-pmic<br /> 0 /sys/bus/platform/drivers/i2c-gpio<br /> 0 /sys/bus/platform/drivers/s3c-i2c<br /> 0 /sys/bus/platform/drivers/arm-pmu<br /> 0 /sys/bus/platform/drivers/bt_rfkill<br /> 0 /sys/bus/platform/drivers/watchdog<br /> 0 /sys/bus/platform/drivers/s3c-adc<br /> 0 /sys/bus/platform/drivers/s3c-pl330<br /> 0 /sys/bus/platform/drivers/s3cfb<br /> 0 /sys/bus/platform/drivers/pvrsrvkm<br /> 0 /sys/bus/platform/drivers/s5pv210-uart<br /> 0 /sys/bus/platform/drivers/android_pmem<br /> 0 /sys/bus/platform/drivers/sec_jack<br /> 0 /sys/bus/platform/drivers/modemctl<br /> 0 /sys/bus/platform/drivers/samsung-onenand<br /> 0 /sys/bus/platform/drivers/spi_gpio<br /> 0 /sys/bus/platform/drivers/s3c-usbgadget<br /> 0 /sys/bus/platform/drivers/android_usb<br /> 0 /sys/bus/platform/drivers/usb_mass_storage<br /> 0 /sys/bus/platform/drivers/rndis<br /> 0 /sys/bus/platform/drivers/gpio-event<br /> 0 /sys/bus/platform/drivers/alarm<br /> 0 /sys/bus/platform/drivers/s3c-rtc<br /> 0 /sys/bus/platform/drivers/s3c-mfc<br /> 0 /sys/bus/platform/drivers/s3c-jpg<br /> 0 /sys/bus/platform/drivers/s3c-sdhci<br /> 0 /sys/bus/platform/drivers/timed-gpio<br /> 0 /sys/bus/platform/drivers/soc-audio<br /> 0 /sys/bus/platform/drivers/s5pc1xx-iis<br /> 0 /sys/bus/platform/drivers/s3c-fimc<br /> 0 /sys/bus/platform/drivers/max8998-charger<br /> 0 /sys/bus/platform/drivers<br /> 0 /sys/bus/platform<br /> 0 /sys/bus/spi/devices<br /> 0 /sys/bus/spi/drivers/tl2796<br /> 0 /sys/bus/spi/drivers<br /> 0 /sys/bus/spi<br /> 0 /sys/bus/i2c/devices<br /> 0 /sys/bus/i2c/drivers/dummy<br /> 0 /sys/bus/i2c/drivers/max8998<br /> 0 /sys/bus/i2c/drivers/ak8973<br /> 0 /sys/bus/i2c/drivers/kr3dm<br /> 0 /sys/bus/i2c/drivers/pn544<br /> 0 /sys/bus/i2c/drivers/fsa9480<br /> 0 /sys/bus/i2c/drivers/Atmel MXT224<br /> 0 /sys/bus/i2c/drivers/k3g<br /> 0 /sys/bus/i2c/drivers/gp2a<br /> 0 /sys/bus/i2c/drivers/rtc_max8998<br /> 0 /sys/bus/i2c/drivers/dev_driver<br /> 0 /sys/bus/i2c/drivers/S5KA3DFX<br /> 0 /sys/bus/i2c/drivers/S5K4ECGX<br /> 0 /sys/bus/i2c/drivers/max17040<br /> 0 /sys/bus/i2c/drivers/WM8994 I2C Codec<br /> 0 /sys/bus/i2c/drivers/cypress_touchkey_driver<br /> 0 /sys/bus/i2c/drivers<br /> 0 /sys/bus/i2c<br /> 0 /sys/bus/scsi/devices<br /> 0 /sys/bus/scsi/drivers/sd<br /> 0 /sys/bus/scsi/drivers<br /> 0 /sys/bus/scsi<br /> 0 /sys/bus/serio/devices<br /> 0 /sys/bus/serio/drivers/atkbd<br /> 0 /sys/bus/serio/drivers<br /> 0 /sys/bus/serio<br /> 0 /sys/bus/mmc/devices<br /> 0 /sys/bus/mmc/drivers/mmcblk<br /> 0 /sys/bus/mmc/drivers<br /> 0 /sys/bus/mmc<br /> 0 /sys/bus/sdio/devices<br /> 0 /sys/bus/sdio/drivers<br /> 0 /sys/bus/sdio<br /> 0 /sys/bus<br /> 0 /sys/class/regulator<br /> 0 /sys/class/bdi<br /> 0 /sys/class/gpio<br /> 0 /sys/class/lcd<br /> 0 /sys/class/backlight<br /> 0 /sys/class/tty<br /> 0 /sys/class/vtconsole<br /> 0 /sys/class/spi_master<br /> 0 /sys/class/i2c-adapter<br /> 0 /sys/class/sec<br /> 0 /sys/class/block<br /> 0 /sys/class/graphics<br /> 0 /sys/class/misc<br /> 0 /sys/class/scsi_host<br /> 0 /sys/class/scsi_device<br /> 0 /sys/class/input<br /> 0 /sys/class/rtc<br /> 0 /sys/class/power_supply<br /> 0 /sys/class/mmc_host<br /> 0 /sys/class/sound<br /> 0 /sys/class/net<br /> 0 /sys/class/bluetooth<br /> 0 /sys/class/rfkill<br /> 0 /sys/class/mem<br /> 0 /sys/class/vc<br /> 0 /sys/class/firmware<br /> 0 /sys/class/timed_output<br /> 0 /sys/class/pvr<br /> 0 /sys/class/switch<br /> 0 /sys/class/scsi_disk<br /> 0 /sys/class/scsi_generic<br /> 0 /sys/class/mtd<br /> 0 /sys/class/ppp<br /> 0 /sys/class/usb_composite<br /> 0 /sys/class/i2c-dev<br /> 0 /sys/class/video4linux<br /> 0 /sys/class<br /> 0 /sys/firmware<br /> 0 /sys/kernel/debug/asoc/WM8994.4-001a/dapm<br /> 0 /sys/kernel/debug/asoc/WM8994.4-001a<br /> 0 /sys/kernel/debug/asoc<br /> 0 /sys/kernel/debug/binder/proc<br /> 0 /sys/kernel/debug/binder<br /> 0 /sys/kernel/debug/mmc1<br /> 0 /sys/kernel/debug/mmc0/mmc0:0001<br /> 0 /sys/kernel/debug/mmc0<br /> 0 /sys/kernel/debug/modemctl<br /> 0 /sys/kernel/debug/bluetooth<br /> 0 /sys/kernel/debug/bdi/179:0<br /> 0 /sys/kernel/debug/bdi/31:6<br /> 0 /sys/kernel/debug/bdi/31:5<br /> 0 /sys/kernel/debug/bdi/31:4<br /> 0 /sys/kernel/debug/bdi/31:3<br /> 0 /sys/kernel/debug/bdi/31:2<br /> 0 /sys/kernel/debug/bdi/31:1<br /> 0 /sys/kernel/debug/bdi/31:0<br /> 0 /sys/kernel/debug/bdi/mtd-rwmap<br /> 0 /sys/kernel/debug/bdi/mtd-romap<br /> 0 /sys/kernel/debug/bdi/mtd-unmap<br /> 0 /sys/kernel/debug/bdi/7:7<br /> 0 /sys/kernel/debug/bdi/7:6<br /> 0 /sys/kernel/debug/bdi/7:5<br /> 0 /sys/kernel/debug/bdi/7:4<br /> 0 /sys/kernel/debug/bdi/7:3<br /> 0 /sys/kernel/debug/bdi/7:2<br /> 0 /sys/kernel/debug/bdi/7:1<br /> 0 /sys/kernel/debug/bdi/7:0<br /> 0 /sys/kernel/debug/bdi/1:15<br /> 0 /sys/kernel/debug/bdi/1:14<br /> 0 /sys/kernel/debug/bdi/1:13<br /> 0 /sys/kernel/debug/bdi/1:12<br /> 0 /sys/kernel/debug/bdi/1:11<br /> 0 /sys/kernel/debug/bdi/1:10<br /> 0 /sys/kernel/debug/bdi/1:9<br /> 0 /sys/kernel/debug/bdi/1:8<br /> 0 /sys/kernel/debug/bdi/1:7<br /> 0 /sys/kernel/debug/bdi/1:6<br /> 0 /sys/kernel/debug/bdi/1:5<br /> 0 /sys/kernel/debug/bdi/1:4<br /> 0 /sys/kernel/debug/bdi/1:3<br /> 0 /sys/kernel/debug/bdi/1:2<br /> 0 /sys/kernel/debug/bdi/1:1<br /> 0 /sys/kernel/debug/bdi/1:0<br /> 0 /sys/kernel/debug/bdi/default<br /> 0 /sys/kernel/debug/bdi<br /> 0 /sys/kernel/debug<br /> 0 /sys/kernel/ipv4<br /> 0 /sys/kernel/mm<br /> 0 /sys/kernel<br /> 0 /sys/power<br /> 0 /sys/module/kernel/parameters<br /> 0 /sys/module/kernel<br /> 0 /sys/module/fiq_debugger/parameters<br /> 0 /sys/module/fiq_debugger<br /> 0 /sys/module/printk/parameters<br /> 0 /sys/module/printk<br /> 0 /sys/module/wakelock/parameters<br /> 0 /sys/module/wakelock<br /> 0 /sys/module/userwakelock/parameters<br /> 0 /sys/module/userwakelock<br /> 0 /sys/module/earlysuspend/parameters<br /> 0 /sys/module/earlysuspend<br /> 0 /sys/module/spurious/parameters<br /> 0 /sys/module/spurious<br /> 0 /sys/module/yaffs/parameters<br /> 0 /sys/module/yaffs<br /> 0 /sys/module/s3cfb/parameters<br /> 0 /sys/module/s3cfb<br /> 0 /sys/module/keyboard/parameters<br /> 0 /sys/module/keyboard<br /> 0 /sys/module/vt/parameters<br /> 0 /sys/module/vt<br /> 0 /sys/module/pvrsrvkm/parameters<br /> 0 /sys/module/pvrsrvkm<br /> 0 /sys/module/scsi_mod/parameters<br /> 0 /sys/module/scsi_mod<br /> 0 /sys/module/sg/parameters<br /> 0 /sys/module/sg<br /> 0 /sys/module/onenand/parameters<br /> 0 /sys/module/onenand<br /> 0 /sys/module/u_ether/parameters<br /> 0 /sys/module/u_ether<br /> 0 /sys/module/mousedev/parameters<br /> 0 /sys/module/mousedev<br /> 0 /sys/module/alarm/parameters<br /> 0 /sys/module/alarm<br /> 0 /sys/module/alarm_dev/parameters<br /> 0 /sys/module/alarm_dev<br /> 0 /sys/module/tuner_xc2028/parameters<br /> 0 /sys/module/tuner_xc2028<br /> 0 /sys/module/tuner_simple/parameters<br /> 0 /sys/module/tuner_simple<br /> 0 /sys/module/mt20xx/parameters<br /> 0 /sys/module/mt20xx<br /> 0 /sys/module/tda8290/parameters<br /> 0 /sys/module/tda8290<br /> 0 /sys/module/tea5767/parameters<br /> 0 /sys/module/tea5767<br /> 0 /sys/module/tea5761/parameters<br /> 0 /sys/module/tea5761<br /> 0 /sys/module/tda9887/parameters<br /> 0 /sys/module/tda9887<br /> 0 /sys/module/xc5000/parameters<br /> 0 /sys/module/xc5000<br /> 0 /sys/module/v4l1_compat/parameters<br /> 0 /sys/module/v4l1_compat<br /> 0 /sys/module/hci_uart/parameters<br /> 0 /sys/module/hci_uart<br /> 0 /sys/module/mmc_core/parameters<br /> 0 /sys/module/mmc_core<br /> 0 /sys/module/sdhci/parameters<br /> 0 /sys/module/sdhci<br /> 0 /sys/module/binder/parameters<br /> 0 /sys/module/binder<br /> 0 /sys/module/lowmemorykiller/parameters<br /> 0 /sys/module/lowmemorykiller<br /> 0 /sys/module/snd/parameters<br /> 0 /sys/module/snd<br /> 0 /sys/module/snd_timer/parameters<br /> 0 /sys/module/snd_timer<br /> 0 /sys/module/snd_pcm/parameters<br /> 0 /sys/module/snd_pcm<br /> 0 /sys/module/sch_htb/parameters<br /> 0 /sys/module/sch_htb<br /> 0 /sys/module/nf_conntrack/parameters<br /> 0 /sys/module/nf_conntrack<br /> 0 /sys/module/nf_conntrack_amanda/parameters<br /> 0 /sys/module/nf_conntrack_amanda<br /> 0 /sys/module/nf_conntrack_ftp/parameters<br /> 0 /sys/module/nf_conntrack_ftp<br /> 0 /sys/module/nf_conntrack_h323/parameters<br /> 0 /sys/module/nf_conntrack_h323<br /> 0 /sys/module/nf_conntrack_irc/parameters<br /> 0 /sys/module/nf_conntrack_irc<br /> 0 /sys/module/nf_conntrack_netbios_ns/parameters<br /> 0 /sys/module/nf_conntrack_netbios_ns<br /> 0 /sys/module/nf_conntrack_sane/parameters<br /> 0 /sys/module/nf_conntrack_sane<br /> 0 /sys/module/nf_conntrack_sip/parameters<br /> 0 /sys/module/nf_conntrack_sip<br /> 0 /sys/module/nf_conntrack_tftp/parameters<br /> 0 /sys/module/nf_conntrack_tftp<br /> 0 /sys/module/nf_conntrack_ipv4/parameters<br /> 0 /sys/module/nf_conntrack_ipv4<br /> 0 /sys/module/tcp_cubic/parameters<br /> 0 /sys/module/tcp_cubic<br /> 0 /sys/module/ipv6/parameters<br /> 0 /sys/module/ipv6<br /> 0 /sys/module/l2cap/parameters<br /> 0 /sys/module/l2cap<br /> 0 /sys/module/sco/parameters<br /> 0 /sys/module/sco<br /> 0 /sys/module/rfcomm/parameters<br /> 0 /sys/module/rfcomm<br /> 0 /sys/module/rfkill/parameters<br /> 0 /sys/module/rfkill<br /> 0 /sys/module<br /> 0 /sys/block<br /> 0 /sys/</div>

Steventroughtonsmith http://wiki.meego.com/Talk:ARM/Hummingbird 2011-01-10T13:35:20Z

<p>Steventroughtonsmith: Created page with &quot;=== dmesg output ==== [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35.7-g814333b (root@Ubuntu) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Sun Jan …&quot;</p> <hr /> <div>=== dmesg output ====<br /> <br /> [ 0.000000] Initializing cgroup subsys cpu<br /> [ 0.000000] Linux version 2.6.35.7-g814333b (root@Ubuntu) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Sun Jan 9 19:45:54 GMT 2011<br /> [ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f<br /> [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache<br /> [ 0.000000] Machine: herring<br /> [ 0.000000] Partition (from atag) bootloader -- Offset:0x00000000 Size:0x00200000<br /> [ 0.000000] Partition (from atag) misc -- Offset:0x004c0000 Size:0x00140000<br /> [ 0.000000] Partition (from atag) boot -- Offset:0x00600000 Size:0x00800000<br /> [ 0.000000] Partition (from atag) recovery -- Offset:0x00e00000 Size:0x00800000<br /> [ 0.000000] Partition (from atag) cache -- Offset:0x01600000 Size:0x1d580000<br /> [ 0.000000] Partition (from atag) radio -- Offset:0x1eb80000 Size:0x00d80000<br /> [ 0.000000] Partition (from atag) efs -- Offset:0x1f900000 Size:0x006c0000<br /> [ 0.000000] Memory policy: ECC disabled, Data cache writeback<br /> [ 0.000000] On node 0 totalpages: 20480<br /> [ 0.000000] free_area_init_node: node 0, pgdat c0562a6c, node_mem_map c0659000<br /> [ 0.000000] Normal zone: 160 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 20320 pages, LIFO batch:3<br /> [ 0.000000] On node 1 totalpages: 65536<br /> [ 0.000000] free_area_init_node: node 1, pgdat c05630f4, node_mem_map d0002000<br /> [ 0.000000] Normal zone: 512 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 65024 pages, LIFO batch:15<br /> [ 0.000000] On node 2 totalpages: 32512<br /> [ 0.000000] free_area_init_node: node 2, pgdat c056377c, node_mem_map e0001000<br /> [ 0.000000] Normal zone: 254 pages used for memmap<br /> [ 0.000000] Normal zone: 0 pages reserved<br /> [ 0.000000] Normal zone: 32258 pages, LIFO batch:7<br /> [ 0.000000] On node 3 totalpages: 0<br /> [ 0.000000] free_area_init_node: node 3, pgdat c0563e04, node_mem_map c0701c20<br /> [ 0.000000] Normal zone: 1 pages exceeds realsize 0<br /> [ 0.000000] CPU S5PV210/S5PC110 (id 0x43110222)<br /> [ 0.000000] s5pv210_init_clocks: initializing clocks<br /> [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics<br /> [ 0.000000] s5pv210_setup_clocks: registering clocks<br /> [ 0.000000] s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00300400<br /> [ 0.000000] s5pv210_setup_clocks: xtal is 24000000<br /> [ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=96000000 V=54000000<br /> [ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000<br /> [ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000<br /> [ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000<br /> [ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 133400000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000<br /> [ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000<br /> [ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000<br /> [ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 166750000<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857<br /> [ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000<br /> [ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000<br /> [ 0.000000] sclk: source is mout_mpll (1), rate is 66700000<br /> [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000<br /> [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000<br /> [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000<br /> [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000<br /> [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x312d7000<br /> [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40204000<br /> [ 0.000000] s5pv210: 6291456 bytes system memory reserved for fimc0 at 0x42604000<br /> [ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x42c04000<br /> [ 0.000000] s5pv210: 6291456 bytes system memory reserved for fimc2 at 0x435af000<br /> [ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x336d7000<br /> [ 0.000000] s5pv210: 4915200 bytes system memory reserved for fimd at 0x43baf000<br /> [ 0.000000] Built 3 zonelists in Zone order, mobility grouping on. Total pages: 117602<br /> [ 0.000000] Kernel command line: no_console_suspend=1 console=null androidboot.serialno=36325C63C14E00EC androidboot.bootloader=I9020XXJK1 androidboot.baseband=I9020XXJK8 androidboot.carrier=TMB gain_code=0 s3cfb.bootloaderfb=0x34a00000 <br /> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)<br /> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br /> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br /> [ 0.000000] Memory: 80MB 256MB 127MB = 463MB total<br /> [ 0.000000] Memory: 351616k/351616k available, 122496k reserved, 0K highmem<br /> [ 0.000000] Virtual kernel memory layout:<br /> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<br /> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<br /> [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)<br /> [ 0.000000] vmalloc : 0xe8000000 - 0xfc000000 ( 320 MB)<br /> [ 0.000000] lowmem : 0xc0000000 - 0xe7f00000 ( 639 MB)<br /> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)<br /> [ 0.000000] .init : 0xc0008000 - 0xc002c000 ( 144 kB)<br /> [ 0.000000] .text : 0xc002c000 - 0xc055e000 (5320 kB)<br /> [ 0.000000] .data : 0xc055e000 - 0xc05a5740 ( 286 kB)<br /> [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=4<br /> [ 0.000000] Hierarchical RCU implementation.<br /> [ 0.000000] RCU-based detection of stalled CPUs is disabled.<br /> [ 0.000000] Verbose stalled-CPUs detection is disabled.<br /> [ 0.000000] NR_IRQS:393<br /> [ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41<br /> [ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41<br /> [ 0.000000] mult[140737]<br /> [ 0.000000] max_delta_ns[2937815369]<br /> [ 0.000000] min_delta_ns[30517]<br /> [ 0.000000] rate[32768]<br /> [ 0.000000] HZ[256]<br /> [ 0.000000] Console: colour dummy device 80x30<br /> [ 0.000207] Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)<br /> [ 0.081958] pid_max: default: 32768 minimum: 301<br /> [ 0.082024] Mount-cache hash table entries: 512<br /> [ 0.082373] Initializing cgroup subsys debug<br /> [ 0.082389] Initializing cgroup subsys cpuacct<br /> [ 0.082400] Initializing cgroup subsys freezer<br /> [ 0.082430] CPU: Testing write buffer coherency: ok<br /> [ 0.084948] regulator: core version 0.5<br /> [ 0.085109] NET: Registered protocol family 16<br /> [ 0.092889] console [ttyFIQ0] enabled<br /> [ 0.093001] Registered FIQ tty driver c4c1b300<br /> [ 0.096272] ram_console: got buffer at 57f00000, size ff000<br /> [ 0.096409] ram_console: no valid data in buffer (sig = 0x00000000)<br /> [ 0.109608] console [ram-1] enabled<br /> [ 0.109804] S5PC110 Hardware version : EVT1<br /> [ 0.109919] HWREV is 0xb<br /> [ 0.110580] invalid media device<br /> [ 0.110678] invalid media device<br /> [ 0.110775] invalid media device<br /> [ 0.110872] invalid media device<br /> [ 0.111050] invalid media device<br /> [ 0.111148] invalid media device<br /> [ 0.111283] S3C Power Management, Copyright 2004 Simtec Electronics<br /> [ 0.111469] pmstats at 57fff000<br /> [ 0.112742] S5PV210: Initializing architecture<br /> [ 0.113192] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0<br /> [ 0.113451] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8<br /> [ 0.113683] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12<br /> [ 0.113912] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16<br /> [ 0.114223] regulator: pd_audio_supply: 5000 mV normal <br /> [ 0.114527] regulator: pd_cam_supply: 5000 mV normal <br /> [ 0.114759] regulator: pd_tv_supply: 5000 mV normal <br /> [ 0.115058] regulator: pd_lcd_supply: 5000 mV normal <br /> [ 0.115275] regulator: pd_g3d_supply: 5000 mV normal <br /> [ 0.115580] regulator: pd_mfc_supply: 5000 mV normal <br /> [ 0.121316] bio: create slab &lt;bio-0&gt; at 0<br /> [ 0.122109] SCSI subsystem initialized<br /> [ 0.122638] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)<br /> [ 0.122854] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)<br /> [ 0.124364] regulator: VALIVE_1.2V: 1200 mV <br /> [ 0.125076] regulator: VUSB_1.1V: 1100 mV <br /> [ 0.126302] regulator: VADC_3.3V: 3300 mV <br /> [ 0.127438] regulator: VLCD_1.8V: 1800 mV <br /> [ 0.128126] regulator: VUSB_3.3V: 3300 mV <br /> [ 0.129375] regulator: VCC_2.8V_PDA: 2800 mV <br /> [ 0.130070] regulator: CAM_AF_3.0V: 3000 mV <br /> [ 0.130856] regulator: CAM_SENSOR_CORE_1.2V: 1200 mV <br /> [ 0.131551] regulator: VGA_VDDIO_2.8V: 2800 mV <br /> [ 0.132252] regulator: VGA_DVDD_1.8V: 1800 mV <br /> [ 0.133046] regulator: CAM_ISP_HOST_2.8V: 2800 mV <br /> [ 0.133746] regulator: VGA_AVDD_2.8V: 2800 mV <br /> [ 0.134988] regulator: VCC_3.0V_LCD: 3000 mV <br /> [ 0.135496] regulator: VDD_ARM: 750 &lt;--&gt; 1500 mV at 1200 mV <br /> [ 0.136009] regulator: VDD_INT: 750 &lt;--&gt; 1500 mV at 1100 mV <br /> [ 0.137281] regulator: VCC_1.8V: 1800 mV <br /> [ 0.137981] regulator: CAM_ISP_CORE_1.2V: 1200 mV <br /> [ 0.138378] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)<br /> [ 0.138684] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)<br /> [ 0.138987] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)<br /> [ 0.139291] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL)<br /> [ 0.139671] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)<br /> [ 0.139895] i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL)<br /> [ 0.140284] i2c-gpio i2c-gpio.14: using pins 240 (SDA) and 239 (SCL)<br /> [ 0.140696] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)<br /> [ 0.141144] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter<br /> [ 0.141618] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter<br /> [ 0.141946] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter<br /> [ 0.142513] Advanced Linux Sound Architecture Driver Version 1.0.23.<br /> [ 0.143079] Bluetooth: Core ver 2.15<br /> [ 0.143234] NET: Registered protocol family 31<br /> [ 0.143419] Bluetooth: HCI device and connection manager initialized<br /> [ 0.143525] Bluetooth: HCI socket layer initialized<br /> [ 0.143852] Switching to clocksource clock_source_systimer<br /> [ 0.150691] NET: Registered protocol family 2<br /> [ 0.151077] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)<br /> [ 0.151990] TCP established hash table entries: 16384 (order: 5, 131072 bytes)<br /> [ 0.152501] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)<br /> [ 0.153205] TCP: Hash tables configured (established 16384 bind 16384)<br /> [ 0.153310] TCP reno registered<br /> [ 0.153416] UDP hash table entries: 256 (order: 1, 12288 bytes)<br /> [ 0.153626] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)<br /> [ 0.153889] NET: Registered protocol family 1<br /> [ 0.154290] Trying to unpack rootfs image as initramfs...<br /> [ 0.370890] Freeing initrd memory: 2904K<br /> [ 0.530778] wake enabled for irq 165<br /> [ 0.530951] wake disabled for irq 165<br /> [ 0.531660] S5PV210 ADC driver, (c) 2010 Samsung Electronics<br /> [ 0.532269] Loaded driver for PL330 DMAC-0 s3c-pl330<br /> [ 0.532377] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32<br /> [ 0.532648] Loaded driver for PL330 DMAC-1 s3c-pl330<br /> [ 0.532753] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32<br /> [ 0.533026] Loaded driver for PL330 DMAC-2 s3c-pl330<br /> [ 0.533131] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32<br /> [ 0.534584] ashmem: initialized<br /> [ 0.534974] ROMFS MTD (C) 2007 Red Hat, Inc.<br /> [ 0.535085] yaffs built Jan 9 2011 19:39:48 Installing. <br /> [ 0.535300] msgmni has been set to 692<br /> [ 0.538418] alg: No test for stdrng (krng)<br /> [ 0.538685] io scheduler noop registered<br /> [ 0.538788] io scheduler deadline registered<br /> [ 0.538899] io scheduler cfq registered (default)<br /> [ 0.539661] s3cfb s3cfb: [fb2] dma: 0x43baf000, cpu: 0xe8800000, size: 0x002ee000<br /> [ 0.566146] FIMD src sclk = 166750000<br /> [ 0.566367] s3cfb s3cfb: registered successfully<br /> [ 0.567596] PA FB = 0x43BAF000, bits per pixel = 32<br /> [ 0.567788] screen width=480 height=800 va=0xd3baf000 pa=0x43baf000<br /> [ 0.567895] xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0<br /> [ 0.568082] fb_size=3072000<br /> [ 0.568193] Back frameBuffer[0].VAddr=d3d26000 PAddr=43d26000 size=1536000<br /> [ 0.568549] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10<br /> [ 0.568814] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10<br /> [ 0.569172] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10<br /> [ 0.574983] brd: module loaded<br /> [ 0.577800] loop: module loaded<br /> [ 0.577965] pmem: 1 init<br /> [ 0.578247] android_pmem: probe of android_pmem.0 failed with error -1<br /> [ 0.578370] pmem_gpu1: 1 init<br /> [ 0.578610] android_pmem: probe of android_pmem.1 failed with error -1<br /> [ 0.578813] pmem_adsp: 1 init<br /> [ 0.579052] android_pmem: probe of android_pmem.2 failed with error -1<br /> [ 0.579321] Android kernel panic handler initialized (bind=kpanic)<br /> [ 0.586194] Loading pn544 driver<br /> [ 0.586500] pn544_probe : requesting IRQ 44<br /> [ 0.586705] sec_jack_probe : Registering jack driver<br /> [ 0.587012] wake enabled for irq 38<br /> [ 0.588568] wake enabled for irq 167<br /> [ 0.589083] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [ 0.590749] [MODEM] bp_irq()<br /> [ 0.590965] wake enabled for irq 47<br /> [ 0.591067] wake enabled for irq 43<br /> [ 0.591878] Muxed OneNAND 512MB 1.8V 16-bit (0x50)<br /> [ 0.592066] OneNAND version = 0x013e<br /> [ 0.592166] Chip support all block unlock<br /> [ 0.592265] Chip has 4KiB pagesize<br /> [ 0.592462] Scanning device for bad blocks<br /> [ 0.594058] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [ 2.199914] Bad eraseblock 2047 at 0x1ffc0000<br /> [ 2.200105] Creating 7 MTD partitions on &quot;(null)&quot;:<br /> [ 2.200213] 0x000000000000-0x000000200000 : &quot;bootloader&quot;<br /> [ 2.201208] 0x0000004c0000-0x000000600000 : &quot;misc&quot;<br /> [ 2.202034] 0x000000600000-0x000000e00000 : &quot;boot&quot;<br /> [ 2.203081] 0x000000e00000-0x000001600000 : &quot;recovery&quot;<br /> [ 2.203991] 0x000001600000-0x00001eb80000 : &quot;cache&quot;<br /> [ 2.209164] 0x00001eb80000-0x00001f900000 : &quot;radio&quot;<br /> [ 2.210156] 0x00001f900000-0x00001ffc0000 : &quot;efs&quot;<br /> [ 2.355012] tl2796_probe successfully proved<br /> [ 2.355266] PPP generic driver version 2.4.2<br /> [ 2.355530] PPP Deflate Compression module registered<br /> [ 2.355635] PPP BSD Compression module registered<br /> [ 2.356631] PPP MPPE Compression module registered<br /> [ 2.356737] NET: Registered protocol family 24<br /> [ 2.358844] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics<br /> [ 2.358854] s3c-udc : version 15 March 2009 (DMA Mode)<br /> [ 2.359170] android init<br /> [ 2.359312] android_probe pdata: c056f6e8<br /> [ 2.359480] android_bind<br /> [ 2.359663] android_bind_config<br /> [ 2.359839] android_usb gadget: android_usb ready<br /> [ 2.375563] Registered gadget driver 'android_usb'<br /> [ 2.375798] f_adb init<br /> [ 2.375899] android_register_function adb<br /> [ 2.375999] f_mass_storage init<br /> [ 2.376227] fsg_probe pdev: c056ea88, pdata: c056f70c<br /> [ 2.376374] android_register_function usb_mass_storage<br /> [ 2.376560] f_rndis init<br /> [ 2.376736] android_register_function rndis<br /> [ 2.376844] rndis_function_bind_config MAC: 02:07:45:30:41:41<br /> [ 2.377047] android_usb gadget: using random self ethernet address<br /> [ 2.377159] android_usb gadget: using random host ethernet address<br /> [ 2.378247] usb0: MAC 9e:d8:8a:f7:15:2e<br /> [ 2.378375] usb0: HOST MAC 5a:70:67:a4:ba:91<br /> [ 2.378682] android_usb gadget: Mass Storage Function, version: 2009/09/11<br /> [ 2.378871] android_usb gadget: Number of LUNs=1<br /> [ 2.378976] lun0: LUN: removable file: (no medium)<br /> [ 2.379241] adb_bind_config<br /> [ 2.379780] mice: PS/2 mouse device common for all mice<br /> [ 2.380288] input: mxt224_ts_input as /devices/virtual/input/input0<br /> [ 2.421359] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171<br /> [ 2.500100] input: gyro as /devices/virtual/input/input1<br /> [ 2.500555] wake enabled for irq 166<br /> [ 2.500768] wake enabled for irq 169<br /> [ 2.500894] wake enabled for irq 170<br /> [ 2.500997] GPIO Input Driver: Start gpio inputs for herring-keypad in interrupt mode<br /> [ 2.501375] input: herring-keypad as /devices/virtual/input/input2<br /> [ 2.502040] input: proximity as /devices/virtual/input/input3<br /> [ 2.502610] input: lightsensor-level as /devices/virtual/input/input4<br /> [ 2.503190] S3C24XX RTC, (c) 2004,2006 Simtec Electronics<br /> [ 2.504051] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 2.504565] using rtc device, s3c, for alarms<br /> [ 2.504697] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0<br /> [ 2.504959] i2c /dev entries driver<br /> [ 2.506651] Linux video capture interface: v2.00<br /> [ 2.506915] mfc_init: &lt;6&gt;S5PC110 MFC Driver, (c) 2009 Samsung Electronics<br /> [ 2.506923] <br /> [ 2.507698] S3C JPEG Driver, (c) 2007 Samsung Electronics<br /> [ 2.507801] JPEG driver for S5PV210<br /> [ 2.509938] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02<br /> [ 2.510377] device-mapper: uevent: version 1.0.3<br /> [ 2.513590] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com<br /> [ 2.513711] Bluetooth: HCI UART driver ver 2.2<br /> [ 2.513897] Bluetooth: HCI H4 protocol initialized<br /> [ 2.514173] cpuidle: using governor ladder<br /> [ 2.514362] cpuidle: using governor menu<br /> [ 2.514598] sdhci: Secure Digital Host Controller Interface driver<br /> [ 2.514702] sdhci: Copyright(c) Pierre Ossman<br /> [ 2.515017] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)<br /> [ 2.515180] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)<br /> [ 2.515383] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)<br /> [ 2.515777] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA<br /> [ 2.515941] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)<br /> [ 2.516141] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)<br /> [ 2.516260] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)<br /> [ 2.516590] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA<br /> [ 2.517211] logger: created 64K log 'log_main'<br /> [ 2.517422] logger: created 256K log 'log_events'<br /> [ 2.517613] logger: created 64K log 'log_radio'<br /> [ 2.517882] logger: created 64K log 'log_system'<br /> [ 2.518280] No device for DAI WM8994 PAIFRX<br /> [ 2.518859] WM8994 Audio Codec 0.1<br /> [ 2.535546] s3c_idma_preallocate_buffer: VA-e8240000 PA-C0000000 163840bytes<br /> [ 2.535949] asoc: WM8994 PAIFRX &lt;-&gt; s5pc1xx-i2s mapping ok<br /> [ 2.536706] ALSA device list:<br /> [ 2.536810] #0: smdkc110 (WM8994)<br /> [ 2.536938] GACT probability NOT on<br /> [ 2.537049] Mirror/redirect action on<br /> [ 2.537151] u32 classifier<br /> [ 2.537249] Actions configured<br /> [ 2.537434] Netfilter messages via NETLINK v0.30.<br /> [ 2.537597] nf_conntrack version 0.5.0 (5539 buckets, 22156 max)<br /> [ 2.537954] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use<br /> [ 2.538060] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or<br /> [ 2.538248] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.<br /> [ 2.539160] ctnetlink v0.93: registering with nfnetlink.<br /> [ 2.539392] xt_time: kernel timezone is -0000<br /> [ 2.541812] ip_tables: (C) 2000-2006 Netfilter Core Team<br /> [ 2.542109] arp_tables: (C) 2002 David S. Miller<br /> [ 2.542288] TCP cubic registered<br /> [ 2.542532] NET: Registered protocol family 10<br /> [ 2.544658] lo: Disabled Privacy Extensions<br /> [ 2.551304] Mobile IPv6<br /> [ 2.551407] IPv6 over IPv4 tunneling driver<br /> [ 2.553354] sit0: Disabled Privacy Extensions<br /> [ 2.556762] ip6tnl0: Disabled Privacy Extensions<br /> [ 2.558531] NET: Registered protocol family 17<br /> [ 2.558663] NET: Registered protocol family 15<br /> [ 2.558931] Bluetooth: L2CAP ver 2.14<br /> [ 2.559121] Bluetooth: L2CAP socket layer initialized<br /> [ 2.559249] Bluetooth: SCO (Voice Link) ver 0.6<br /> [ 2.559452] Bluetooth: SCO socket layer initialized<br /> [ 2.559662] Bluetooth: RFCOMM TTY layer initialized<br /> [ 2.559782] Bluetooth: RFCOMM socket layer initialized<br /> [ 2.559971] Bluetooth: RFCOMM ver 1.11<br /> [ 2.560104] NET: Registered protocol family 35<br /> [ 2.560366] ThumbEE CPU extension supported.<br /> [ 2.561172] S5PV210 CPUFREQ Initialising...<br /> [ 2.561507] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2<br /> [ 2.564676] regulator_init_complete: disabling pd_mfc_supply<br /> [ 2.564871] regulator_init_complete: disabling pd_tv_supply<br /> [ 2.564978] regulator_init_complete: disabling pd_cam_supply<br /> [ 2.565458] input: cypress-touchkey as /devices/virtual/input/input5<br /> [ 2.593804] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x8, rev2 = 0x9<br /> [ 2.594535] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 2.594662] s3c-rtc s3c2410-rtc: setting system clock to 2011-01-10 09:05:14 UTC (1294650314)<br /> [ 2.596314] FIMC0 registered successfully<br /> [ 2.597738] FIMC1 registered successfully<br /> [ 2.599124] FIMC2 registered successfully<br /> [ 2.599349] max8998_charger_probe : MAX8998 Charger Driver Loading<br /> [ 2.601430] max8998_charger_probe : pmic interrupt registered<br /> [ 2.603022] wake enabled for irq 39<br /> [ 2.606738] Freeing init memory: 144K<br /> [ 2.641235] android_usb gadget: high speed config #1: android<br /> [ 2.939713] mmc0: new high speed MMC card at address 0001<br /> [ 2.942932] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <br /> [ 2.945588] mmcblk0: p1 (system) p2 (userdata) p3 (media)<br /> [ 31.552291] udev: starting version 161<br /> [ 38.494356] enabling adb<br /> [ 38.519296] adb_open<br /> [ 38.769864] android_usb gadget: high speed config #1: android<br /> [ 39.572320] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 39.580576] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling<br /> [ 46.503316] ifb0: no IPv6 routers present<br /> [ 46.518943] ifb1: no IPv6 routers present<br /> [ 48.278996] [wm8994_crespo.c (wm8994_disable_path,841) ] Path[0] is not invaild!<br /> [ 48.279073] <br /> [3869.412157] max8998_int_work_func : pmic interrupt<br /> [3869.420131] s3c_cable_status_update : battery status discharging : 1<br /> [3920.108369] s3c_cable_status_update : battery status discharging : 1<br /> [3970.306487] s3c_cable_status_update : battery status discharging : 1<br /> [4020.536526] s3c_cable_status_update : battery status discharging : 1<br /> [4070.744176] s3c_cable_status_update : battery status discharging : 1<br /> [4120.854396] s3c_cable_status_update : battery status discharging : 1<br /> [4171.020661] s3c_cable_status_update : battery status discharging : 1<br /> [4221.475777] s3c_cable_status_update : battery status discharging : 1<br /> [4271.501492] s3c_cable_status_update : battery status discharging : 1<br /> [4321.833797] s3c_cable_status_update : battery status discharging : 1<br /> [4372.106644] s3c_cable_status_update : battery status discharging : 1<br /> [4422.130401] s3c_cable_status_update : battery status discharging : 1<br /> [4472.739646] s3c_cable_status_update : battery status discharging : 1<br /> [4522.828668] s3c_cable_status_update : battery status discharging : 1<br /> [4573.106049] s3c_cable_status_update : battery status discharging : 1<br /> [4623.349083] s3c_cable_status_update : battery status discharging : 1<br /> [5654.113443] fsa9480 7-0025: dev1: 0x0, dev2: 0x0<br /> [5654.129890] adb_release<br /> [5654.130659] adb_open<br /> [7460.779172] fsa9480 7-0025: dev1: 0x4, dev2: 0x0<br /> [7461.064853] android_usb gadget: high speed config #1: android<br /> <br /> sh-4.0# du /sys/<br /> 0 /sys/fs/ext4<br /> 0 /sys/fs<br /> 0 /sys/devices/platform/power<br /> 0 /sys/devices/platform/power.0/power<br /> 0 /sys/devices/platform/power.0<br /> 0 /sys/devices/platform/watchdog/power<br /> 0 /sys/devices/platform/watchdog<br /> 0 /sys/devices/platform/fiq_debugger.2/power<br /> 0 /sys/devices/platform/fiq_debugger.2<br /> 0 /sys/devices/platform/s5pc110-onenand/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0/mtdblock0<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd0ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1/mtdblock1<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd1ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2/mtdblock2<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd2ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3/mtdblock3<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd3ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4/mtdblock4<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd4ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5/mtdblock5<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd5ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/holders<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/slaves<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/queue/iosched<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6/queue<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6/mtdblock6<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6ro/power<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd/mtd6ro<br /> 0 /sys/devices/platform/s5pc110-onenand/mtd<br /> 0 /sys/devices/platform/s5pc110-onenand<br /> 0 /sys/devices/platform/s3c2410-rtc/power<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc/rtc0/power<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc/rtc0<br /> 0 /sys/devices/platform/s3c2410-rtc/rtc<br /> 0 /sys/devices/platform/s3c2410-rtc<br /> 0 /sys/devices/platform/gpio-event.0/power<br /> 0 /sys/devices/platform/gpio-event.0<br /> 0 /sys/devices/platform/s5pc1xx-iis.0/power<br /> 0 /sys/devices/platform/s5pc1xx-iis.0<br /> 0 /sys/devices/platform/s3c2410-wdt/power<br /> 0 /sys/devices/platform/s3c2410-wdt<br /> 0 /sys/devices/platform/s3cfb/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master/spi3/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master/spi3<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi_master<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/power<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0<br /> 0 /sys/devices/platform/s3cfb/spi_gpio.3<br /> 0 /sys/devices/platform/s3cfb/graphics/fb0/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb0<br /> 0 /sys/devices/platform/s3cfb/graphics/fb1/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb1<br /> 0 /sys/devices/platform/s3cfb/graphics/fb2/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb2<br /> 0 /sys/devices/platform/s3cfb/graphics/fb3/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb3<br /> 0 /sys/devices/platform/s3cfb/graphics/fb4/power<br /> 0 /sys/devices/platform/s3cfb/graphics/fb4<br /> 0 /sys/devices/platform/s3cfb/graphics<br /> 0 /sys/devices/platform/s3cfb<br /> 0 /sys/devices/platform/s3c-mfc/power<br /> 0 /sys/devices/platform/s3c-mfc<br /> 0 /sys/devices/platform/s3c-adc/power<br /> 0 /sys/devices/platform/s3c-adc<br /> 0 /sys/devices/platform/s3c-fimc.0/power<br /> 0 /sys/devices/platform/s3c-fimc.0<br /> 0 /sys/devices/platform/s3c-fimc.1/power<br /> 0 /sys/devices/platform/s3c-fimc.1<br /> 0 /sys/devices/platform/s3c-fimc.2/power<br /> 0 /sys/devices/platform/s3c-fimc.2<br /> 0 /sys/devices/platform/s3c-jpg/power<br /> 0 /sys/devices/platform/s3c-jpg<br /> 0 /sys/devices/platform/pvrsrvkm/power<br /> 0 /sys/devices/platform/pvrsrvkm<br /> 0 /sys/devices/platform/s3c_lcd/power<br /> 0 /sys/devices/platform/s3c_lcd<br /> 0 /sys/devices/platform/sec_jack.1/power<br /> 0 /sys/devices/platform/sec_jack.1<br /> 0 /sys/devices/platform/s3c2440-i2c.0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/0-0069/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/0-0069<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev/i2c-0/power<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev/i2c-0<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.0/i2c-0<br /> 0 /sys/devices/platform/s3c2440-i2c.0<br /> 0 /sys/devices/platform/s3c2440-i2c.1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-001c/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-001c<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-0009/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/1-0009<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev/i2c-1/power<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev/i2c-1<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.1/i2c-1<br /> 0 /sys/devices/platform/s3c2440-i2c.1<br /> 0 /sys/devices/platform/s3c2440-i2c.2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/2-004a/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/2-004a<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev/i2c-2/power<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev/i2c-2<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2/i2c-dev<br /> 0 /sys/devices/platform/s3c2440-i2c.2/i2c-2<br /> 0 /sys/devices/platform/s3c2440-i2c.2<br /> 0 /sys/devices/platform/i2c-gpio.4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/4-001a/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/4-001a<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev/i2c-4/power<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev/i2c-4<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.4/i2c-4<br /> 0 /sys/devices/platform/i2c-gpio.4<br /> 0 /sys/devices/platform/i2c-gpio.5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev/i2c-5/power<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev/i2c-5<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.5/i2c-5<br /> 0 /sys/devices/platform/i2c-gpio.5<br /> 0 /sys/devices/platform/i2c-gpio.6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.6<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.7/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.7<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.8/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.8<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.9/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.9<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.10/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.10<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.11/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.11<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.12/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.12<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.13/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.13<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.14/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.14<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.15/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.15<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.16/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.16<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.17/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.17<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.18/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.18<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.19/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.19<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.20/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.20<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.21/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.21<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.22/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator/regulator.22<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic/regulator<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-pmic<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/battery/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/battery<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/usb/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/usb<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/ac/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply/ac<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger/power_supply<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066/max8998-charger<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0066<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0006/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/6-0006<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev/i2c-6/power<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev/i2c-6<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.6/i2c-6<br /> 0 /sys/devices/platform/i2c-gpio.6<br /> 0 /sys/devices/platform/i2c-gpio.7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/7-0025/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/7-0025<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev/i2c-7/power<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev/i2c-7<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.7/i2c-7<br /> 0 /sys/devices/platform/i2c-gpio.7<br /> 0 /sys/devices/platform/i2c-gpio.8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev/i2c-8/power<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev/i2c-8<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.8/i2c-8<br /> 0 /sys/devices/platform/i2c-gpio.8<br /> 0 /sys/devices/platform/i2c-gpio.9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/9-0036/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/9-0036<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev/i2c-9/power<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev/i2c-9<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.9/i2c-9<br /> 0 /sys/devices/platform/i2c-gpio.9<br /> 0 /sys/devices/platform/i2c-gpio.11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/11-0044/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/11-0044<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev/i2c-11/power<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev/i2c-11<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.11/i2c-11<br /> 0 /sys/devices/platform/i2c-gpio.11<br /> 0 /sys/devices/platform/i2c-gpio.12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev/i2c-12/power<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev/i2c-12<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.12/i2c-12<br /> 0 /sys/devices/platform/i2c-gpio.12<br /> 0 /sys/devices/platform/i2c-gpio.14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/14-002b/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/14-002b<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev/i2c-14/power<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev/i2c-14<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.14/i2c-14<br /> 0 /sys/devices/platform/i2c-gpio.14<br /> 0 /sys/devices/platform/s3c-usbgadget/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0/statistics<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0/power<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net/usb0<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget/net<br /> 0 /sys/devices/platform/s3c-usbgadget/gadget<br /> 0 /sys/devices/platform/s3c-usbgadget<br /> 0 /sys/devices/platform/android_usb/power<br /> 0 /sys/devices/platform/android_usb<br /> 0 /sys/devices/platform/usb_mass_storage/power<br /> 0 /sys/devices/platform/usb_mass_storage/lun0/power<br /> 0 /sys/devices/platform/usb_mass_storage/lun0<br /> 0 /sys/devices/platform/usb_mass_storage<br /> 0 /sys/devices/platform/rndis/power<br /> 0 /sys/devices/platform/rndis<br /> 0 /sys/devices/platform/s3c-sdhci.0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/slaves<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3/power<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3/holders<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/queue/iosched<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/queue<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001/block<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0/mmc0:0001<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host/mmc0<br /> 0 /sys/devices/platform/s3c-sdhci.0/mmc_host<br /> 0 /sys/devices/platform/s3c-sdhci.0<br /> 0 /sys/devices/platform/s3c-sdhci.3/power<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host/mmc1/power<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host/mmc1<br /> 0 /sys/devices/platform/s3c-sdhci.3/mmc_host<br /> 0 /sys/devices/platform/s3c-sdhci.3<br /> 0 /sys/devices/platform/sec-battery/power<br /> 0 /sys/devices/platform/sec-battery<br /> 0 /sys/devices/platform/i2c-gpio.10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/10-0020/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/10-0020<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev/i2c-10/power<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev/i2c-10<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10/i2c-dev<br /> 0 /sys/devices/platform/i2c-gpio.10/i2c-10<br /> 0 /sys/devices/platform/i2c-gpio.10<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator/regulator.0/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator/regulator.0<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.0<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator/regulator.1/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator/regulator.1<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.1<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator/regulator.2/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator/regulator.2<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.2<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator/regulator.3/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator/regulator.3<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.3<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator/regulator.4/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator/regulator.4<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.4<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator/regulator.5/power<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator/regulator.5<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5/regulator<br /> 0 /sys/devices/platform/reg-s5pv210-pd.5<br /> 0 /sys/devices/platform/android_pmem.0/power<br /> 0 /sys/devices/platform/android_pmem.0<br /> 0 /sys/devices/platform/android_pmem.1/power<br /> 0 /sys/devices/platform/android_pmem.1<br /> 0 /sys/devices/platform/android_pmem.2/power<br /> 0 /sys/devices/platform/android_pmem.2<br /> 0 /sys/devices/platform/s3c24xx-pwm.0/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.0<br /> 0 /sys/devices/platform/s3c24xx-pwm.1/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.1<br /> 0 /sys/devices/platform/s3c24xx-pwm.2/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.2<br /> 0 /sys/devices/platform/s3c24xx-pwm.3/power<br /> 0 /sys/devices/platform/s3c24xx-pwm.3<br /> 0 /sys/devices/platform/bt_rfkill/power<br /> 0 /sys/devices/platform/bt_rfkill/rfkill/rfkill0/power<br /> 0 /sys/devices/platform/bt_rfkill/rfkill/rfkill0<br /> 0 /sys/devices/platform/bt_rfkill/rfkill<br /> 0 /sys/devices/platform/bt_rfkill<br /> 0 /sys/devices/platform/bt_sleep/power<br /> 0 /sys/devices/platform/bt_sleep<br /> 0 /sys/devices/platform/ram_console/power<br /> 0 /sys/devices/platform/ram_console<br /> 0 /sys/devices/platform/bcm4329_wlan.1/power<br /> 0 /sys/devices/platform/bcm4329_wlan.1<br /> 0 /sys/devices/platform/s3c-pl330.0/power<br /> 0 /sys/devices/platform/s3c-pl330.0<br /> 0 /sys/devices/platform/s3c-pl330.1/power<br /> 0 /sys/devices/platform/s3c-pl330.1<br /> 0 /sys/devices/platform/s3c-pl330.2/power<br /> 0 /sys/devices/platform/s3c-pl330.2<br /> 0 /sys/devices/platform/s5pv210-uart.0/power<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty/s3c2410_serial0/power<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty/s3c2410_serial0<br /> 0 /sys/devices/platform/s5pv210-uart.0/tty<br /> 0 /sys/devices/platform/s5pv210-uart.0<br /> 0 /sys/devices/platform/s5pv210-uart.1/power<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty/s3c2410_serial1/power<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty/s3c2410_serial1<br /> 0 /sys/devices/platform/s5pv210-uart.1/tty<br /> 0 /sys/devices/platform/s5pv210-uart.1<br /> 0 /sys/devices/platform/s5pv210-uart.3/power<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty/s3c2410_serial3/power<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty/s3c2410_serial3<br /> 0 /sys/devices/platform/s5pv210-uart.3/tty<br /> 0 /sys/devices/platform/s5pv210-uart.3<br /> 0 /sys/devices/platform/modemctl/power<br /> 0 /sys/devices/platform/modemctl<br /> 0 /sys/devices/platform/alarm/power<br /> 0 /sys/devices/platform/alarm<br /> 0 /sys/devices/platform/soc-audio.0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0p/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0p<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0c/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/pcmC0D0c<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/controlC0/power<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0/controlC0<br /> 0 /sys/devices/platform/soc-audio.0/sound/card0<br /> 0 /sys/devices/platform/soc-audio.0/sound<br /> 0 /sys/devices/platform/soc-audio.0<br /> 0 /sys/devices/platform<br /> 0 /sys/devices/system/cpu/cpufreq/ondemand<br /> 0 /sys/devices/system/cpu/cpufreq<br /> 0 /sys/devices/system/cpu/cpuidle<br /> 0 /sys/devices/system/cpu/cpu0/cpuidle/state0<br /> 0 /sys/devices/system/cpu/cpu0/cpuidle<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq/stats<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq/ondemand<br /> 0 /sys/devices/system/cpu/cpu0/cpufreq<br /> 0 /sys/devices/system/cpu/cpu0<br /> 0 /sys/devices/system/cpu<br /> 0 /sys/devices/system/s5pv210-core/s5pv210-core0<br /> 0 /sys/devices/system/s5pv210-core<br /> 0 /sys/devices/system/timer/timer0<br /> 0 /sys/devices/system/timer<br /> 0 /sys/devices/system/timekeeping/timekeeping0<br /> 0 /sys/devices/system/timekeeping<br /> 0 /sys/devices/system/clocksource/clocksource0<br /> 0 /sys/devices/system/clocksource<br /> 0 /sys/devices/system/vic/vic0<br /> 0 /sys/devices/system/vic/vic1<br /> 0 /sys/devices/system/vic/vic2<br /> 0 /sys/devices/system/vic/vic3<br /> 0 /sys/devices/system/vic<br /> 0 /sys/devices/system/vfp/vfp0<br /> 0 /sys/devices/system/vfp<br /> 0 /sys/devices/system<br /> 0 /sys/devices/virtual/gpio/gpiochip0/power<br /> 0 /sys/devices/virtual/gpio/gpiochip0<br /> 0 /sys/devices/virtual/gpio/gpiochip9/power<br /> 0 /sys/devices/virtual/gpio/gpiochip9<br /> 0 /sys/devices/virtual/gpio/gpiochip14/power<br /> 0 /sys/devices/virtual/gpio/gpiochip14<br /> 0 /sys/devices/virtual/gpio/gpiochip23/power<br /> 0 /sys/devices/virtual/gpio/gpiochip23<br /> 0 /sys/devices/virtual/gpio/gpiochip29/power<br /> 0 /sys/devices/virtual/gpio/gpiochip29<br /> 0 /sys/devices/virtual/gpio/gpiochip35/power<br /> 0 /sys/devices/virtual/gpio/gpiochip35<br /> 0 /sys/devices/virtual/gpio/gpiochip40/power<br /> 0 /sys/devices/virtual/gpio/gpiochip40<br /> 0 /sys/devices/virtual/gpio/gpiochip47/power<br /> 0 /sys/devices/virtual/gpio/gpiochip47<br /> 0 /sys/devices/virtual/gpio/gpiochip56/power<br /> 0 /sys/devices/virtual/gpio/gpiochip56<br /> 0 /sys/devices/virtual/gpio/gpiochip62/power<br /> 0 /sys/devices/virtual/gpio/gpiochip62<br /> 0 /sys/devices/virtual/gpio/gpiochip71/power<br /> 0 /sys/devices/virtual/gpio/gpiochip71<br /> 0 /sys/devices/virtual/gpio/gpiochip80/power<br /> 0 /sys/devices/virtual/gpio/gpiochip80<br /> 0 /sys/devices/virtual/gpio/gpiochip89/power<br /> 0 /sys/devices/virtual/gpio/gpiochip89<br /> 0 /sys/devices/virtual/gpio/gpiochip96/power<br /> 0 /sys/devices/virtual/gpio/gpiochip96<br /> 0 /sys/devices/virtual/gpio/gpiochip104/power<br /> 0 /sys/devices/virtual/gpio/gpiochip104<br /> 0 /sys/devices/virtual/gpio/gpiochip112/power<br /> 0 /sys/devices/virtual/gpio/gpiochip112<br /> 0 /sys/devices/virtual/gpio/gpiochip120/power<br /> 0 /sys/devices/virtual/gpio/gpiochip120<br /> 0 /sys/devices/virtual/gpio/gpiochip128/power<br /> 0 /sys/devices/virtual/gpio/gpiochip128<br /> 0 /sys/devices/virtual/gpio/gpiochip137/power<br /> 0 /sys/devices/virtual/gpio/gpiochip137<br /> 0 /sys/devices/virtual/gpio/gpiochip146/power<br /> 0 /sys/devices/virtual/gpio/gpiochip146<br /> 0 /sys/devices/virtual/gpio/gpiochip155/power<br /> 0 /sys/devices/virtual/gpio/gpiochip155<br /> 0 /sys/devices/virtual/gpio/gpiochip164/power<br /> 0 /sys/devices/virtual/gpio/gpiochip164<br /> 0 /sys/devices/virtual/gpio/gpiochip172/power<br /> 0 /sys/devices/virtual/gpio/gpiochip172<br /> 0 /sys/devices/virtual/gpio/gpiochip181/power<br /> 0 /sys/devices/virtual/gpio/gpiochip181<br /> 0 /sys/devices/virtual/gpio/gpiochip188/power<br /> 0 /sys/devices/virtual/gpio/gpiochip188<br /> 0 /sys/devices/virtual/gpio/gpiochip197/power<br /> 0 /sys/devices/virtual/gpio/gpiochip197<br /> 0 /sys/devices/virtual/gpio/gpiochip206/power<br /> 0 /sys/devices/virtual/gpio/gpiochip206<br /> 0 /sys/devices/virtual/gpio/gpiochip212/power<br /> 0 /sys/devices/virtual/gpio/gpiochip212<br /> 0 /sys/devices/virtual/gpio/gpiochip221/power<br /> 0 /sys/devices/virtual/gpio/gpiochip221<br /> 0 /sys/devices/virtual/gpio/gpiochip226/power<br /> 0 /sys/devices/virtual/gpio/gpiochip226<br /> 0 /sys/devices/virtual/gpio/gpiochip235/power<br /> 0 /sys/devices/virtual/gpio/gpiochip235<br /> 0 /sys/devices/virtual/gpio/gpiochip244/power<br /> 0 /sys/devices/virtual/gpio/gpiochip244<br /> 0 /sys/devices/virtual/gpio/gpiochip253/power<br /> 0 /sys/devices/virtual/gpio/gpiochip253<br /> 0 /sys/devices/virtual/gpio/gpiochip262/power<br /> 0 /sys/devices/virtual/gpio/gpiochip262<br /> 0 /sys/devices/virtual/gpio/gpiochip271/power<br /> 0 /sys/devices/virtual/gpio/gpiochip271<br /> 0 /sys/devices/virtual/gpio/gpiochip280/power<br /> 0 /sys/devices/virtual/gpio/gpiochip280<br /> 0 /sys/devices/virtual/gpio/gpiochip289/power<br /> 0 /sys/devices/virtual/gpio/gpiochip289<br /> 0 /sys/devices/virtual/gpio/gpiochip298/power<br /> 0 /sys/devices/virtual/gpio/gpiochip298<br /> 0 /sys/devices/virtual/gpio/gpiochip307/power<br /> 0 /sys/devices/virtual/gpio/gpiochip307<br /> 0 /sys/devices/virtual/gpio/gpiochip316/power<br /> 0 /sys/devices/virtual/gpio/gpiochip316<br /> 0 /sys/devices/virtual/gpio/gpiochip325/power<br /> 0 /sys/devices/virtual/gpio/gpiochip325<br /> 0 /sys/devices/virtual/gpio/gpiochip334/power<br /> 0 /sys/devices/virtual/gpio/gpiochip334<br /> 0 /sys/devices/virtual/gpio/gpiochip343/power<br /> 0 /sys/devices/virtual/gpio/gpiochip343<br /> 0 /sys/devices/virtual/gpio/gpiochip351/power<br /> 0 /sys/devices/virtual/gpio/gpiochip351<br /> 0 /sys/devices/virtual/gpio/gpiochip360/power<br /> 0 /sys/devices/virtual/gpio/gpiochip360<br /> 0 /sys/devices/virtual/gpio/gpiochip369/power<br /> 0 /sys/devices/virtual/gpio/gpiochip369<br /> 0 /sys/devices/virtual/gpio/gpiochip378/power<br /> 0 /sys/devices/virtual/gpio/gpiochip378<br /> 0 /sys/devices/virtual/gpio/gpiochip387/power<br /> 0 /sys/devices/virtual/gpio/gpiochip387<br /> 0 /sys/devices/virtual/gpio/gpiochip396/power<br /> 0 /sys/devices/virtual/gpio/gpiochip396<br /> 0 /sys/devices/virtual/gpio/gpiochip405/power<br /> 0 /sys/devices/virtual/gpio/gpiochip405<br /> 0 /sys/devices/virtual/gpio/gpiochip414/power<br /> 0 /sys/devices/virtual/gpio/gpiochip414<br /> 0 /sys/devices/virtual/gpio/gpiochip423/power<br /> 0 /sys/devices/virtual/gpio/gpiochip423<br /> 0 /sys/devices/virtual/gpio/gpiochip431/power<br /> 0 /sys/devices/virtual/gpio/gpiochip431<br /> 0 /sys/devices/virtual/gpio/gpiochip438/power<br /> 0 /sys/devices/virtual/gpio/gpiochip438<br /> 0 /sys/devices/virtual/gpio/gpiochip447/power<br /> 0 /sys/devices/virtual/gpio/gpiochip447<br /> 0 /sys/devices/virtual/gpio/gpiochip456/power<br /> 0 /sys/devices/virtual/gpio/gpiochip456<br /> 0 /sys/devices/virtual/gpio/gpio104/power<br /> 0 /sys/devices/virtual/gpio/gpio104<br /> 0 /sys/devices/virtual/gpio/gpio105/power<br /> 0 /sys/devices/virtual/gpio/gpio105<br /> 0 /sys/devices/virtual/gpio/gpio251/power<br /> 0 /sys/devices/virtual/gpio/gpio251<br /> 0 /sys/devices/virtual/gpio/gpio73/power<br /> 0 /sys/devices/virtual/gpio/gpio73<br /> 0 /sys/devices/virtual/gpio/gpio74/power<br /> 0 /sys/devices/virtual/gpio/gpio74<br /> 0 /sys/devices/virtual/gpio/gpio75/power<br /> 0 /sys/devices/virtual/gpio/gpio75<br /> 0 /sys/devices/virtual/gpio<br /> 0 /sys/devices/virtual/vtconsole/vtcon0/power<br /> 0 /sys/devices/virtual/vtconsole/vtcon0<br /> 0 /sys/devices/virtual/vtconsole<br /> 0 /sys/devices/virtual/tty/ttyFIQ0/power<br /> 0 /sys/devices/virtual/tty/ttyFIQ0<br /> 0 /sys/devices/virtual/tty/tty/power<br /> 0 /sys/devices/virtual/tty/tty<br /> 0 /sys/devices/virtual/tty/console/power<br /> 0 /sys/devices/virtual/tty/console<br /> 0 /sys/devices/virtual/tty/tty0/power<br /> 0 /sys/devices/virtual/tty/tty0<br /> 0 /sys/devices/virtual/tty/tty1/power<br /> 0 /sys/devices/virtual/tty/tty1<br /> 0 /sys/devices/virtual/tty/tty2/power<br /> 0 /sys/devices/virtual/tty/tty2<br /> 0 /sys/devices/virtual/tty/tty3/power<br /> 0 /sys/devices/virtual/tty/tty3<br /> 0 /sys/devices/virtual/tty/tty4/power<br /> 0 /sys/devices/virtual/tty/tty4<br /> 0 /sys/devices/virtual/tty/tty5/power<br /> 0 /sys/devices/virtual/tty/tty5<br /> 0 /sys/devices/virtual/tty/tty6/power<br /> 0 /sys/devices/virtual/tty/tty6<br /> 0 /sys/devices/virtual/tty/tty7/power<br /> 0 /sys/devices/virtual/tty/tty7<br /> 0 /sys/devices/virtual/tty/tty8/power<br /> 0 /sys/devices/virtual/tty/tty8<br /> 0 /sys/devices/virtual/tty/tty9/power<br /> 0 /sys/devices/virtual/tty/tty9<br /> 0 /sys/devices/virtual/tty/tty10/power<br /> 0 /sys/devices/virtual/tty/tty10<br /> 0 /sys/devices/virtual/tty/tty11/power<br /> 0 /sys/devices/virtual/tty/tty11<br /> 0 /sys/devices/virtual/tty/tty12/power<br /> 0 /sys/devices/virtual/tty/tty12<br /> 0 /sys/devices/virtual/tty/tty13/power<br /> 0 /sys/devices/virtual/tty/tty13<br /> 0 /sys/devices/virtual/tty/tty14/power<br /> 0 /sys/devices/virtual/tty/tty14<br /> 0 /sys/devices/virtual/tty/tty15/power<br /> 0 /sys/devices/virtual/tty/tty15<br /> 0 /sys/devices/virtual/tty/tty16/power<br /> 0 /sys/devices/virtual/tty/tty16<br /> 0 /sys/devices/virtual/tty/tty17/power<br /> 0 /sys/devices/virtual/tty/tty17<br /> 0 /sys/devices/virtual/tty/tty18/power<br /> 0 /sys/devices/virtual/tty/tty18<br /> 0 /sys/devices/virtual/tty/tty19/power<br /> 0 /sys/devices/virtual/tty/tty19<br /> 0 /sys/devices/virtual/tty/tty20/power<br /> 0 /sys/devices/virtual/tty/tty20<br /> 0 /sys/devices/virtual/tty/tty21/power<br /> 0 /sys/devices/virtual/tty/tty21<br /> 0 /sys/devices/virtual/tty/tty22/power<br /> 0 /sys/devices/virtual/tty/tty22<br /> 0 /sys/devices/virtual/tty/tty23/power<br /> 0 /sys/devices/virtual/tty/tty23<br /> 0 /sys/devices/virtual/tty/tty24/power<br /> 0 /sys/devices/virtual/tty/tty24<br /> 0 /sys/devices/virtual/tty/tty25/power<br /> 0 /sys/devices/virtual/tty/tty25<br /> 0 /sys/devices/virtual/tty/tty26/power<br /> 0 /sys/devices/virtual/tty/tty26<br /> 0 /sys/devices/virtual/tty/tty27/power<br /> 0 /sys/devices/virtual/tty/tty27<br /> 0 /sys/devices/virtual/tty/tty28/power<br /> 0 /sys/devices/virtual/tty/tty28<br /> 0 /sys/devices/virtual/tty/tty29/power<br /> 0 /sys/devices/virtual/tty/tty29<br /> 0 /sys/devices/virtual/tty/tty30/power<br /> 0 /sys/devices/virtual/tty/tty30<br /> 0 /sys/devices/virtual/tty/tty31/power<br /> 0 /sys/devices/virtual/tty/tty31<br /> 0 /sys/devices/virtual/tty/tty32/power<br /> 0 /sys/devices/virtual/tty/tty32<br /> 0 /sys/devices/virtual/tty/tty33/power<br /> 0 /sys/devices/virtual/tty/tty33<br /> 0 /sys/devices/virtual/tty/tty34/power<br /> 0 /sys/devices/virtual/tty/tty34<br /> 0 /sys/devices/virtual/tty/tty35/power<br /> 0 /sys/devices/virtual/tty/tty35<br /> 0 /sys/devices/virtual/tty/tty36/power<br /> 0 /sys/devices/virtual/tty/tty36<br /> 0 /sys/devices/virtual/tty/tty37/power<br /> 0 /sys/devices/virtual/tty/tty37<br /> 0 /sys/devices/virtual/tty/tty38/power<br /> 0 /sys/devices/virtual/tty/tty38<br /> 0 /sys/devices/virtual/tty/tty39/power<br /> 0 /sys/devices/virtual/tty/tty39<br /> 0 /sys/devices/virtual/tty/tty40/power<br /> 0 /sys/devices/virtual/tty/tty40<br /> 0 /sys/devices/virtual/tty/tty41/power<br /> 0 /sys/devices/virtual/tty/tty41<br /> 0 /sys/devices/virtual/tty/tty42/power<br /> 0 /sys/devices/virtual/tty/tty42<br /> 0 /sys/devices/virtual/tty/tty43/power<br /> 0 /sys/devices/virtual/tty/tty43<br /> 0 /sys/devices/virtual/tty/tty44/power<br /> 0 /sys/devices/virtual/tty/tty44<br /> 0 /sys/devices/virtual/tty/tty45/power<br /> 0 /sys/devices/virtual/tty/tty45<br /> 0 /sys/devices/virtual/tty/tty46/power<br /> 0 /sys/devices/virtual/tty/tty46<br /> 0 /sys/devices/virtual/tty/tty47/power<br /> 0 /sys/devices/virtual/tty/tty47<br /> 0 /sys/devices/virtual/tty/tty48/power<br /> 0 /sys/devices/virtual/tty/tty48<br /> 0 /sys/devices/virtual/tty/tty49/power<br /> 0 /sys/devices/virtual/tty/tty49<br /> 0 /sys/devices/virtual/tty/tty50/power<br /> 0 /sys/devices/virtual/tty/tty50<br /> 0 /sys/devices/virtual/tty/tty51/power<br /> 0 /sys/devices/virtual/tty/tty51<br /> 0 /sys/devices/virtual/tty/tty52/power<br /> 0 /sys/devices/virtual/tty/tty52<br /> 0 /sys/devices/virtual/tty/tty53/power<br /> 0 /sys/devices/virtual/tty/tty53<br /> 0 /sys/devices/virtual/tty/tty54/power<br /> 0 /sys/devices/virtual/tty/tty54<br /> 0 /sys/devices/virtual/tty/tty55/power<br /> 0 /sys/devices/virtual/tty/tty55<br /> 0 /sys/devices/virtual/tty/tty56/power<br /> 0 /sys/devices/virtual/tty/tty56<br /> 0 /sys/devices/virtual/tty/tty57/power<br /> 0 /sys/devices/virtual/tty/tty57<br /> 0 /sys/devices/virtual/tty/tty58/power<br /> 0 /sys/devices/virtual/tty/tty58<br /> 0 /sys/devices/virtual/tty/tty59/power<br /> 0 /sys/devices/virtual/tty/tty59<br /> 0 /sys/devices/virtual/tty/tty60/power<br /> 0 /sys/devices/virtual/tty/tty60<br /> 0 /sys/devices/virtual/tty/tty61/power<br /> 0 /sys/devices/virtual/tty/tty61<br /> 0 /sys/devices/virtual/tty/tty62/power<br /> 0 /sys/devices/virtual/tty/tty62<br /> 0 /sys/devices/virtual/tty/tty63/power<br /> 0 /sys/devices/virtual/tty/tty63<br /> 0 /sys/devices/virtual/tty/ptmx/power<br /> 0 /sys/devices/virtual/tty/ptmx<br /> 0 /sys/devices/virtual/tty<br /> 0 /sys/devices/virtual/sec/switch/power<br /> 0 /sys/devices/virtual/sec/switch<br /> 0 /sys/devices/virtual/sec/gps/power<br /> 0 /sys/devices/virtual/sec/gps<br /> 0 /sys/devices/virtual/sec/uart_switch/power<br /> 0 /sys/devices/virtual/sec/uart_switch<br /> 0 /sys/devices/virtual/sec<br /> 0 /sys/devices/virtual/bdi/default/power<br /> 0 /sys/devices/virtual/bdi/default<br /> 0 /sys/devices/virtual/bdi/1:0/power<br /> 0 /sys/devices/virtual/bdi/1:0<br /> 0 /sys/devices/virtual/bdi/1:1/power<br /> 0 /sys/devices/virtual/bdi/1:1<br /> 0 /sys/devices/virtual/bdi/1:2/power<br /> 0 /sys/devices/virtual/bdi/1:2<br /> 0 /sys/devices/virtual/bdi/1:3/power<br /> 0 /sys/devices/virtual/bdi/1:3<br /> 0 /sys/devices/virtual/bdi/1:4/power<br /> 0 /sys/devices/virtual/bdi/1:4<br /> 0 /sys/devices/virtual/bdi/1:5/power<br /> 0 /sys/devices/virtual/bdi/1:5<br /> 0 /sys/devices/virtual/bdi/1:6/power<br /> 0 /sys/devices/virtual/bdi/1:6<br /> 0 /sys/devices/virtual/bdi/1:7/power<br /> 0 /sys/devices/virtual/bdi/1:7<br /> 0 /sys/devices/virtual/bdi/1:8/power<br /> 0 /sys/devices/virtual/bdi/1:8<br /> 0 /sys/devices/virtual/bdi/1:9/power<br /> 0 /sys/devices/virtual/bdi/1:9<br /> 0 /sys/devices/virtual/bdi/1:10/power<br /> 0 /sys/devices/virtual/bdi/1:10<br /> 0 /sys/devices/virtual/bdi/1:11/power<br /> 0 /sys/devices/virtual/bdi/1:11<br /> 0 /sys/devices/virtual/bdi/1:12/power<br /> 0 /sys/devices/virtual/bdi/1:12<br /> 0 /sys/devices/virtual/bdi/1:13/power<br /> 0 /sys/devices/virtual/bdi/1:13<br /> 0 /sys/devices/virtual/bdi/1:14/power<br /> 0 /sys/devices/virtual/bdi/1:14<br /> 0 /sys/devices/virtual/bdi/1:15/power<br /> 0 /sys/devices/virtual/bdi/1:15<br /> 0 /sys/devices/virtual/bdi/7:0/power<br /> 0 /sys/devices/virtual/bdi/7:0<br /> 0 /sys/devices/virtual/bdi/7:1/power<br /> 0 /sys/devices/virtual/bdi/7:1<br /> 0 /sys/devices/virtual/bdi/7:2/power<br /> 0 /sys/devices/virtual/bdi/7:2<br /> 0 /sys/devices/virtual/bdi/7:3/power<br /> 0 /sys/devices/virtual/bdi/7:3<br /> 0 /sys/devices/virtual/bdi/7:4/power<br /> 0 /sys/devices/virtual/bdi/7:4<br /> 0 /sys/devices/virtual/bdi/7:5/power<br /> 0 /sys/devices/virtual/bdi/7:5<br /> 0 /sys/devices/virtual/bdi/7:6/power<br /> 0 /sys/devices/virtual/bdi/7:6<br /> 0 /sys/devices/virtual/bdi/7:7/power<br /> 0 /sys/devices/virtual/bdi/7:7<br /> 0 /sys/devices/virtual/bdi/mtd-unmap/power<br /> 0 /sys/devices/virtual/bdi/mtd-unmap<br /> 0 /sys/devices/virtual/bdi/mtd-romap/power<br /> 0 /sys/devices/virtual/bdi/mtd-romap<br /> 0 /sys/devices/virtual/bdi/mtd-rwmap/power<br /> 0 /sys/devices/virtual/bdi/mtd-rwmap<br /> 0 /sys/devices/virtual/bdi/31:0/power<br /> 0 /sys/devices/virtual/bdi/31:0<br /> 0 /sys/devices/virtual/bdi/31:1/power<br /> 0 /sys/devices/virtual/bdi/31:1<br /> 0 /sys/devices/virtual/bdi/31:2/power<br /> 0 /sys/devices/virtual/bdi/31:2<br /> 0 /sys/devices/virtual/bdi/31:3/power<br /> 0 /sys/devices/virtual/bdi/31:3<br /> 0 /sys/devices/virtual/bdi/31:4/power<br /> 0 /sys/devices/virtual/bdi/31:4<br /> 0 /sys/devices/virtual/bdi/31:5/power<br /> 0 /sys/devices/virtual/bdi/31:5<br /> 0 /sys/devices/virtual/bdi/31:6/power<br /> 0 /sys/devices/virtual/bdi/31:6<br /> 0 /sys/devices/virtual/bdi/179:0/power<br /> 0 /sys/devices/virtual/bdi/179:0<br /> 0 /sys/devices/virtual/bdi<br /> 0 /sys/devices/virtual/net/lo/statistics<br /> 0 /sys/devices/virtual/net/lo/power<br /> 0 /sys/devices/virtual/net/lo<br /> 0 /sys/devices/virtual/net/rmnet0/statistics<br /> 0 /sys/devices/virtual/net/rmnet0/power<br /> 0 /sys/devices/virtual/net/rmnet0<br /> 0 /sys/devices/virtual/net/ifb0/statistics<br /> 0 /sys/devices/virtual/net/ifb0/power<br /> 0 /sys/devices/virtual/net/ifb0<br /> 0 /sys/devices/virtual/net/ifb1/statistics<br /> 0 /sys/devices/virtual/net/ifb1/power<br /> 0 /sys/devices/virtual/net/ifb1<br /> 0 /sys/devices/virtual/net/sit0/statistics<br /> 0 /sys/devices/virtual/net/sit0/power<br /> 0 /sys/devices/virtual/net/sit0<br /> 0 /sys/devices/virtual/net/ip6tnl0/statistics<br /> 0 /sys/devices/virtual/net/ip6tnl0/power<br /> 0 /sys/devices/virtual/net/ip6tnl0<br /> 0 /sys/devices/virtual/net<br /> 0 /sys/devices/virtual/misc/rfkill/power<br /> 0 /sys/devices/virtual/misc/rfkill<br /> 0 /sys/devices/virtual/misc/adc/power<br /> 0 /sys/devices/virtual/misc/adc<br /> 0 /sys/devices/virtual/misc/ashmem/power<br /> 0 /sys/devices/virtual/misc/ashmem<br /> 0 /sys/devices/virtual/misc/apm_bios/power<br /> 0 /sys/devices/virtual/misc/apm_bios<br /> 0 /sys/devices/virtual/misc/akm8973/power<br /> 0 /sys/devices/virtual/misc/akm8973<br /> 0 /sys/devices/virtual/misc/accelerometer/power<br /> 0 /sys/devices/virtual/misc/accelerometer<br /> 0 /sys/devices/virtual/misc/pn544/power<br /> 0 /sys/devices/virtual/misc/pn544<br /> 0 /sys/devices/virtual/misc/modem_ctl/power<br /> 0 /sys/devices/virtual/misc/modem_ctl<br /> 0 /sys/devices/virtual/misc/modem_fmt/power<br /> 0 /sys/devices/virtual/misc/modem_fmt<br /> 0 /sys/devices/virtual/misc/modem_rfs/power<br /> 0 /sys/devices/virtual/misc/modem_rfs<br /> 0 /sys/devices/virtual/misc/android_adb/power<br /> 0 /sys/devices/virtual/misc/android_adb<br /> 0 /sys/devices/virtual/misc/android_adb_enable/power<br /> 0 /sys/devices/virtual/misc/android_adb_enable<br /> 0 /sys/devices/virtual/misc/psaux/power<br /> 0 /sys/devices/virtual/misc/psaux<br /> 0 /sys/devices/virtual/misc/keychord/power<br /> 0 /sys/devices/virtual/misc/keychord<br /> 0 /sys/devices/virtual/misc/uinput/power<br /> 0 /sys/devices/virtual/misc/uinput<br /> 0 /sys/devices/virtual/misc/alarm/power<br /> 0 /sys/devices/virtual/misc/alarm<br /> 0 /sys/devices/virtual/misc/s3c-mfc/power<br /> 0 /sys/devices/virtual/misc/s3c-mfc<br /> 0 /sys/devices/virtual/misc/s3c-jpg/power<br /> 0 /sys/devices/virtual/misc/s3c-jpg<br /> 0 /sys/devices/virtual/misc/device-mapper/power<br /> 0 /sys/devices/virtual/misc/device-mapper<br /> 0 /sys/devices/virtual/misc/binder/power<br /> 0 /sys/devices/virtual/misc/binder<br /> 0 /sys/devices/virtual/misc/log_main/power<br /> 0 /sys/devices/virtual/misc/log_main<br /> 0 /sys/devices/virtual/misc/log_events/power<br /> 0 /sys/devices/virtual/misc/log_events<br /> 0 /sys/devices/virtual/misc/log_radio/power<br /> 0 /sys/devices/virtual/misc/log_radio<br /> 0 /sys/devices/virtual/misc/log_system/power<br /> 0 /sys/devices/virtual/misc/log_system<br /> 0 /sys/devices/virtual/misc/cpu_dma_latency/power<br /> 0 /sys/devices/virtual/misc/cpu_dma_latency<br /> 0 /sys/devices/virtual/misc/network_latency/power<br /> 0 /sys/devices/virtual/misc/network_latency<br /> 0 /sys/devices/virtual/misc/network_throughput/power<br /> 0 /sys/devices/virtual/misc/network_throughput<br /> 0 /sys/devices/virtual/misc<br /> 0 /sys/devices/virtual/mem/mem/power<br /> 0 /sys/devices/virtual/mem/mem<br /> 0 /sys/devices/virtual/mem/kmem/power<br /> 0 /sys/devices/virtual/mem/kmem<br /> 0 /sys/devices/virtual/mem/null/power<br /> 0 /sys/devices/virtual/mem/null<br /> 0 /sys/devices/virtual/mem/zero/power<br /> 0 /sys/devices/virtual/mem/zero<br /> 0 /sys/devices/virtual/mem/full/power<br /> 0 /sys/devices/virtual/mem/full<br /> 0 /sys/devices/virtual/mem/random/power<br /> 0 /sys/devices/virtual/mem/random<br /> 0 /sys/devices/virtual/mem/urandom/power<br /> 0 /sys/devices/virtual/mem/urandom<br /> 0 /sys/devices/virtual/mem/kmsg/power<br /> 0 /sys/devices/virtual/mem/kmsg<br /> 0 /sys/devices/virtual/mem/s3c-mem/power<br /> 0 /sys/devices/virtual/mem/s3c-mem<br /> 0 /sys/devices/virtual/mem<br /> 0 /sys/devices/virtual/vc/vcs/power<br /> 0 /sys/devices/virtual/vc/vcs<br /> 0 /sys/devices/virtual/vc/vcsa/power<br /> 0 /sys/devices/virtual/vc/vcsa<br /> 0 /sys/devices/virtual/vc/vcs1/power<br /> 0 /sys/devices/virtual/vc/vcs1<br /> 0 /sys/devices/virtual/vc/vcsa1/power<br /> 0 /sys/devices/virtual/vc/vcsa1<br /> 0 /sys/devices/virtual/vc/vcs2/power<br /> 0 /sys/devices/virtual/vc/vcs2<br /> 0 /sys/devices/virtual/vc/vcsa2/power<br /> 0 /sys/devices/virtual/vc/vcsa2<br /> 0 /sys/devices/virtual/vc<br /> 0 /sys/devices/virtual/timed_output/vibrator/power<br /> 0 /sys/devices/virtual/timed_output/vibrator<br /> 0 /sys/devices/virtual/timed_output<br /> 0 /sys/devices/virtual/pvr/pvrsrvkm/power<br /> 0 /sys/devices/virtual/pvr/pvrsrvkm<br /> 0 /sys/devices/virtual/pvr<br /> 0 /sys/devices/virtual/block/ram0/power<br /> 0 /sys/devices/virtual/block/ram0/holders<br /> 0 /sys/devices/virtual/block/ram0/slaves<br /> 0 /sys/devices/virtual/block/ram0/queue<br /> 0 /sys/devices/virtual/block/ram0<br /> 0 /sys/devices/virtual/block/ram1/power<br /> 0 /sys/devices/virtual/block/ram1/holders<br /> 0 /sys/devices/virtual/block/ram1/slaves<br /> 0 /sys/devices/virtual/block/ram1/queue<br /> 0 /sys/devices/virtual/block/ram1<br /> 0 /sys/devices/virtual/block/ram2/power<br /> 0 /sys/devices/virtual/block/ram2/holders<br /> 0 /sys/devices/virtual/block/ram2/slaves<br /> 0 /sys/devices/virtual/block/ram2/queue<br /> 0 /sys/devices/virtual/block/ram2<br /> 0 /sys/devices/virtual/block/ram3/power<br /> 0 /sys/devices/virtual/block/ram3/holders<br /> 0 /sys/devices/virtual/block/ram3/slaves<br /> 0 /sys/devices/virtual/block/ram3/queue<br /> 0 /sys/devices/virtual/block/ram3<br /> 0 /sys/devices/virtual/block/ram4/power<br /> 0 /sys/devices/virtual/block/ram4/holders<br /> 0 /sys/devices/virtual/block/ram4/slaves<br /> 0 /sys/devices/virtual/block/ram4/queue<br /> 0 /sys/devices/virtual/block/ram4<br /> 0 /sys/devices/virtual/block/ram5/power<br /> 0 /sys/devices/virtual/block/ram5/holders<br /> 0 /sys/devices/virtual/block/ram5/slaves<br /> 0 /sys/devices/virtual/block/ram5/queue<br /> 0 /sys/devices/virtual/block/ram5<br /> 0 /sys/devices/virtual/block/ram6/power<br /> 0 /sys/devices/virtual/block/ram6/holders<br /> 0 /sys/devices/virtual/block/ram6/slaves<br /> 0 /sys/devices/virtual/block/ram6/queue<br /> 0 /sys/devices/virtual/block/ram6<br /> 0 /sys/devices/virtual/block/ram7/power<br /> 0 /sys/devices/virtual/block/ram7/holders<br /> 0 /sys/devices/virtual/block/ram7/slaves<br /> 0 /sys/devices/virtual/block/ram7/queue<br /> 0 /sys/devices/virtual/block/ram7<br /> 0 /sys/devices/virtual/block/ram8/power<br /> 0 /sys/devices/virtual/block/ram8/holders<br /> 0 /sys/devices/virtual/block/ram8/slaves<br /> 0 /sys/devices/virtual/block/ram8/queue<br /> 0 /sys/devices/virtual/block/ram8<br /> 0 /sys/devices/virtual/block/ram9/power<br /> 0 /sys/devices/virtual/block/ram9/holders<br /> 0 /sys/devices/virtual/block/ram9/slaves<br /> 0 /sys/devices/virtual/block/ram9/queue<br /> 0 /sys/devices/virtual/block/ram9<br /> 0 /sys/devices/virtual/block/ram10/power<br /> 0 /sys/devices/virtual/block/ram10/holders<br /> 0 /sys/devices/virtual/block/ram10/slaves<br /> 0 /sys/devices/virtual/block/ram10/queue<br /> 0 /sys/devices/virtual/block/ram10<br /> 0 /sys/devices/virtual/block/ram11/power<br /> 0 /sys/devices/virtual/block/ram11/holders<br /> 0 /sys/devices/virtual/block/ram11/slaves<br /> 0 /sys/devices/virtual/block/ram11/queue<br /> 0 /sys/devices/virtual/block/ram11<br /> 0 /sys/devices/virtual/block/ram12/power<br /> 0 /sys/devices/virtual/block/ram12/holders<br /> 0 /sys/devices/virtual/block/ram12/slaves<br /> 0 /sys/devices/virtual/block/ram12/queue<br /> 0 /sys/devices/virtual/block/ram12<br /> 0 /sys/devices/virtual/block/ram13/power<br /> 0 /sys/devices/virtual/block/ram13/holders<br /> 0 /sys/devices/virtual/block/ram13/slaves<br /> 0 /sys/devices/virtual/block/ram13/queue<br /> 0 /sys/devices/virtual/block/ram13<br /> 0 /sys/devices/virtual/block/ram14/power<br /> 0 /sys/devices/virtual/block/ram14/holders<br /> 0 /sys/devices/virtual/block/ram14/slaves<br /> 0 /sys/devices/virtual/block/ram14/queue<br /> 0 /sys/devices/virtual/block/ram14<br /> 0 /sys/devices/virtual/block/ram15/power<br /> 0 /sys/devices/virtual/block/ram15/holders<br /> 0 /sys/devices/virtual/block/ram15/slaves<br /> 0 /sys/devices/virtual/block/ram15/queue<br /> 0 /sys/devices/virtual/block/ram15<br /> 0 /sys/devices/virtual/block/loop0/power<br /> 0 /sys/devices/virtual/block/loop0/holders<br /> 0 /sys/devices/virtual/block/loop0/slaves<br /> 0 /sys/devices/virtual/block/loop0/queue<br /> 0 /sys/devices/virtual/block/loop0<br /> 0 /sys/devices/virtual/block/loop1/power<br /> 0 /sys/devices/virtual/block/loop1/holders<br /> 0 /sys/devices/virtual/block/loop1/slaves<br /> 0 /sys/devices/virtual/block/loop1/queue<br /> 0 /sys/devices/virtual/block/loop1<br /> 0 /sys/devices/virtual/block/loop2/power<br /> 0 /sys/devices/virtual/block/loop2/holders<br /> 0 /sys/devices/virtual/block/loop2/slaves<br /> 0 /sys/devices/virtual/block/loop2/queue<br /> 0 /sys/devices/virtual/block/loop2<br /> 0 /sys/devices/virtual/block/loop3/power<br /> 0 /sys/devices/virtual/block/loop3/holders<br /> 0 /sys/devices/virtual/block/loop3/slaves<br /> 0 /sys/devices/virtual/block/loop3/queue<br /> 0 /sys/devices/virtual/block/loop3<br /> 0 /sys/devices/virtual/block/loop4/power<br /> 0 /sys/devices/virtual/block/loop4/holders<br /> 0 /sys/devices/virtual/block/loop4/slaves<br /> 0 /sys/devices/virtual/block/loop4/queue<br /> 0 /sys/devices/virtual/block/loop4<br /> 0 /sys/devices/virtual/block/loop5/power<br /> 0 /sys/devices/virtual/block/loop5/holders<br /> 0 /sys/devices/virtual/block/loop5/slaves<br /> 0 /sys/devices/virtual/block/loop5/queue<br /> 0 /sys/devices/virtual/block/loop5<br /> 0 /sys/devices/virtual/block/loop6/power<br /> 0 /sys/devices/virtual/block/loop6/holders<br /> 0 /sys/devices/virtual/block/loop6/slaves<br /> 0 /sys/devices/virtual/block/loop6/queue<br /> 0 /sys/devices/virtual/block/loop6<br /> 0 /sys/devices/virtual/block/loop7/power<br /> 0 /sys/devices/virtual/block/loop7/holders<br /> 0 /sys/devices/virtual/block/loop7/slaves<br /> 0 /sys/devices/virtual/block/loop7/queue<br /> 0 /sys/devices/virtual/block/loop7<br /> 0 /sys/devices/virtual/block<br /> 0 /sys/devices/virtual/switch/h2w/power<br /> 0 /sys/devices/virtual/switch/h2w<br /> 0 /sys/devices/virtual/switch/dock/power<br /> 0 /sys/devices/virtual/switch/dock<br /> 0 /sys/devices/virtual/switch/usb_configuration/power<br /> 0 /sys/devices/virtual/switch/usb_configuration<br /> 0 /sys/devices/virtual/switch<br /> 0 /sys/devices/virtual/ppp/ppp/power<br /> 0 /sys/devices/virtual/ppp/ppp<br /> 0 /sys/devices/virtual/ppp<br /> 0 /sys/devices/virtual/usb_composite/rndis/power<br /> 0 /sys/devices/virtual/usb_composite/rndis<br /> 0 /sys/devices/virtual/usb_composite/usb_mass_storage/power<br /> 0 /sys/devices/virtual/usb_composite/usb_mass_storage<br /> 0 /sys/devices/virtual/usb_composite/adb/power<br /> 0 /sys/devices/virtual/usb_composite/adb<br /> 0 /sys/devices/virtual/usb_composite<br /> 0 /sys/devices/virtual/input/mice/power<br /> 0 /sys/devices/virtual/input/mice<br /> 0 /sys/devices/virtual/input/input0/id<br /> 0 /sys/devices/virtual/input/input0/capabilities<br /> 0 /sys/devices/virtual/input/input0/power<br /> 0 /sys/devices/virtual/input/input0/event0/power<br /> 0 /sys/devices/virtual/input/input0/event0<br /> 0 /sys/devices/virtual/input/input0<br /> 0 /sys/devices/virtual/input/input1/id<br /> 0 /sys/devices/virtual/input/input1/capabilities<br /> 0 /sys/devices/virtual/input/input1/power<br /> 0 /sys/devices/virtual/input/input1/event1/power<br /> 0 /sys/devices/virtual/input/input1/event1<br /> 0 /sys/devices/virtual/input/input1<br /> 0 /sys/devices/virtual/input/input2/id<br /> 0 /sys/devices/virtual/input/input2/capabilities<br /> 0 /sys/devices/virtual/input/input2/power<br /> 0 /sys/devices/virtual/input/input2/event2/power<br /> 0 /sys/devices/virtual/input/input2/event2<br /> 0 /sys/devices/virtual/input/input2<br /> 0 /sys/devices/virtual/input/input3/id<br /> 0 /sys/devices/virtual/input/input3/capabilities<br /> 0 /sys/devices/virtual/input/input3/power<br /> 0 /sys/devices/virtual/input/input3/event3/power<br /> 0 /sys/devices/virtual/input/input3/event3<br /> 0 /sys/devices/virtual/input/input3<br /> 0 /sys/devices/virtual/input/input4/id<br /> 0 /sys/devices/virtual/input/input4/capabilities<br /> 0 /sys/devices/virtual/input/input4/power<br /> 0 /sys/devices/virtual/input/input4/event4/power<br /> 0 /sys/devices/virtual/input/input4/event4<br /> 0 /sys/devices/virtual/input/input4<br /> 0 /sys/devices/virtual/input/input5/id<br /> 0 /sys/devices/virtual/input/input5/capabilities<br /> 0 /sys/devices/virtual/input/input5/power<br /> 0 /sys/devices/virtual/input/input5/event5/power<br /> 0 /sys/devices/virtual/input/input5/event5<br /> 0 /sys/devices/virtual/input/input5<br /> 0 /sys/devices/virtual/input<br /> 0 /sys/devices/virtual/sound/timer/power<br /> 0 /sys/devices/virtual/sound/timer<br /> 0 /sys/devices/virtual/sound<br /> 0 /sys/devices/virtual/video4linux/video0/power<br /> 0 /sys/devices/virtual/video4linux/video0<br /> 0 /sys/devices/virtual/video4linux/video1/power<br /> 0 /sys/devices/virtual/video4linux/video1<br /> 0 /sys/devices/virtual/video4linux/video2/power<br /> 0 /sys/devices/virtual/video4linux/video2<br /> 0 /sys/devices/virtual/video4linux<br /> 0 /sys/devices/virtual<br /> 0 /sys/devices<br /> 0 /sys/dev/block<br /> 0 /sys/dev/char<br /> 0 /sys/dev<br /> 0 /sys/bus/platform/devices<br /> 0 /sys/bus/platform/drivers/power<br /> 0 /sys/bus/platform/drivers/fiq_debugger<br /> 0 /sys/bus/platform/drivers/ram_console<br /> 0 /sys/bus/platform/drivers/s3c24xx-pwm<br /> 0 /sys/bus/platform/drivers/reg-s5pv210-pd<br /> 0 /sys/bus/platform/drivers/max8998-pmic<br /> 0 /sys/bus/platform/drivers/i2c-gpio<br /> 0 /sys/bus/platform/drivers/s3c-i2c<br /> 0 /sys/bus/platform/drivers/arm-pmu<br /> 0 /sys/bus/platform/drivers/bt_rfkill<br /> 0 /sys/bus/platform/drivers/watchdog<br /> 0 /sys/bus/platform/drivers/s3c-adc<br /> 0 /sys/bus/platform/drivers/s3c-pl330<br /> 0 /sys/bus/platform/drivers/s3cfb<br /> 0 /sys/bus/platform/drivers/pvrsrvkm<br /> 0 /sys/bus/platform/drivers/s5pv210-uart<br /> 0 /sys/bus/platform/drivers/android_pmem<br /> 0 /sys/bus/platform/drivers/sec_jack<br /> 0 /sys/bus/platform/drivers/modemctl<br /> 0 /sys/bus/platform/drivers/samsung-onenand<br /> 0 /sys/bus/platform/drivers/spi_gpio<br /> 0 /sys/bus/platform/drivers/s3c-usbgadget<br /> 0 /sys/bus/platform/drivers/android_usb<br /> 0 /sys/bus/platform/drivers/usb_mass_storage<br /> 0 /sys/bus/platform/drivers/rndis<br /> 0 /sys/bus/platform/drivers/gpio-event<br /> 0 /sys/bus/platform/drivers/alarm<br /> 0 /sys/bus/platform/drivers/s3c-rtc<br /> 0 /sys/bus/platform/drivers/s3c-mfc<br /> 0 /sys/bus/platform/drivers/s3c-jpg<br /> 0 /sys/bus/platform/drivers/s3c-sdhci<br /> 0 /sys/bus/platform/drivers/timed-gpio<br /> 0 /sys/bus/platform/drivers/soc-audio<br /> 0 /sys/bus/platform/drivers/s5pc1xx-iis<br /> 0 /sys/bus/platform/drivers/s3c-fimc<br /> 0 /sys/bus/platform/drivers/max8998-charger<br /> 0 /sys/bus/platform/drivers<br /> 0 /sys/bus/platform<br /> 0 /sys/bus/spi/devices<br /> 0 /sys/bus/spi/drivers/tl2796<br /> 0 /sys/bus/spi/drivers<br /> 0 /sys/bus/spi<br /> 0 /sys/bus/i2c/devices<br /> 0 /sys/bus/i2c/drivers/dummy<br /> 0 /sys/bus/i2c/drivers/max8998<br /> 0 /sys/bus/i2c/drivers/ak8973<br /> 0 /sys/bus/i2c/drivers/kr3dm<br /> 0 /sys/bus/i2c/drivers/pn544<br /> 0 /sys/bus/i2c/drivers/fsa9480<br /> 0 /sys/bus/i2c/drivers/Atmel MXT224<br /> 0 /sys/bus/i2c/drivers/k3g<br /> 0 /sys/bus/i2c/drivers/gp2a<br /> 0 /sys/bus/i2c/drivers/rtc_max8998<br /> 0 /sys/bus/i2c/drivers/dev_driver<br /> 0 /sys/bus/i2c/drivers/S5KA3DFX<br /> 0 /sys/bus/i2c/drivers/S5K4ECGX<br /> 0 /sys/bus/i2c/drivers/max17040<br /> 0 /sys/bus/i2c/drivers/WM8994 I2C Codec<br /> 0 /sys/bus/i2c/drivers/cypress_touchkey_driver<br /> 0 /sys/bus/i2c/drivers<br /> 0 /sys/bus/i2c<br /> 0 /sys/bus/scsi/devices<br /> 0 /sys/bus/scsi/drivers/sd<br /> 0 /sys/bus/scsi/drivers<br /> 0 /sys/bus/scsi<br /> 0 /sys/bus/serio/devices<br /> 0 /sys/bus/serio/drivers/atkbd<br /> 0 /sys/bus/serio/drivers<br /> 0 /sys/bus/serio<br /> 0 /sys/bus/mmc/devices<br /> 0 /sys/bus/mmc/drivers/mmcblk<br /> 0 /sys/bus/mmc/drivers<br /> 0 /sys/bus/mmc<br /> 0 /sys/bus/sdio/devices<br /> 0 /sys/bus/sdio/drivers<br /> 0 /sys/bus/sdio<br /> 0 /sys/bus<br /> 0 /sys/class/regulator<br /> 0 /sys/class/bdi<br /> 0 /sys/class/gpio<br /> 0 /sys/class/lcd<br /> 0 /sys/class/backlight<br /> 0 /sys/class/tty<br /> 0 /sys/class/vtconsole<br /> 0 /sys/class/spi_master<br /> 0 /sys/class/i2c-adapter<br /> 0 /sys/class/sec<br /> 0 /sys/class/block<br /> 0 /sys/class/graphics<br /> 0 /sys/class/misc<br /> 0 /sys/class/scsi_host<br /> 0 /sys/class/scsi_device<br /> 0 /sys/class/input<br /> 0 /sys/class/rtc<br /> 0 /sys/class/power_supply<br /> 0 /sys/class/mmc_host<br /> 0 /sys/class/sound<br /> 0 /sys/class/net<br /> 0 /sys/class/bluetooth<br /> 0 /sys/class/rfkill<br /> 0 /sys/class/mem<br /> 0 /sys/class/vc<br /> 0 /sys/class/firmware<br /> 0 /sys/class/timed_output<br /> 0 /sys/class/pvr<br /> 0 /sys/class/switch<br /> 0 /sys/class/scsi_disk<br /> 0 /sys/class/scsi_generic<br /> 0 /sys/class/mtd<br /> 0 /sys/class/ppp<br /> 0 /sys/class/usb_composite<br /> 0 /sys/class/i2c-dev<br /> 0 /sys/class/video4linux<br /> 0 /sys/class<br /> 0 /sys/firmware<br /> 0 /sys/kernel/debug/asoc/WM8994.4-001a/dapm<br /> 0 /sys/kernel/debug/asoc/WM8994.4-001a<br /> 0 /sys/kernel/debug/asoc<br /> 0 /sys/kernel/debug/binder/proc<br /> 0 /sys/kernel/debug/binder<br /> 0 /sys/kernel/debug/mmc1<br /> 0 /sys/kernel/debug/mmc0/mmc0:0001<br /> 0 /sys/kernel/debug/mmc0<br /> 0 /sys/kernel/debug/modemctl<br /> 0 /sys/kernel/debug/bluetooth<br /> 0 /sys/kernel/debug/bdi/179:0<br /> 0 /sys/kernel/debug/bdi/31:6<br /> 0 /sys/kernel/debug/bdi/31:5<br /> 0 /sys/kernel/debug/bdi/31:4<br /> 0 /sys/kernel/debug/bdi/31:3<br /> 0 /sys/kernel/debug/bdi/31:2<br /> 0 /sys/kernel/debug/bdi/31:1<br /> 0 /sys/kernel/debug/bdi/31:0<br /> 0 /sys/kernel/debug/bdi/mtd-rwmap<br /> 0 /sys/kernel/debug/bdi/mtd-romap<br /> 0 /sys/kernel/debug/bdi/mtd-unmap<br /> 0 /sys/kernel/debug/bdi/7:7<br /> 0 /sys/kernel/debug/bdi/7:6<br /> 0 /sys/kernel/debug/bdi/7:5<br /> 0 /sys/kernel/debug/bdi/7:4<br /> 0 /sys/kernel/debug/bdi/7:3<br /> 0 /sys/kernel/debug/bdi/7:2<br /> 0 /sys/kernel/debug/bdi/7:1<br /> 0 /sys/kernel/debug/bdi/7:0<br /> 0 /sys/kernel/debug/bdi/1:15<br /> 0 /sys/kernel/debug/bdi/1:14<br /> 0 /sys/kernel/debug/bdi/1:13<br /> 0 /sys/kernel/debug/bdi/1:12<br /> 0 /sys/kernel/debug/bdi/1:11<br /> 0 /sys/kernel/debug/bdi/1:10<br /> 0 /sys/kernel/debug/bdi/1:9<br /> 0 /sys/kernel/debug/bdi/1:8<br /> 0 /sys/kernel/debug/bdi/1:7<br /> 0 /sys/kernel/debug/bdi/1:6<br /> 0 /sys/kernel/debug/bdi/1:5<br /> 0 /sys/kernel/debug/bdi/1:4<br /> 0 /sys/kernel/debug/bdi/1:3<br /> 0 /sys/kernel/debug/bdi/1:2<br /> 0 /sys/kernel/debug/bdi/1:1<br /> 0 /sys/kernel/debug/bdi/1:0<br /> 0 /sys/kernel/debug/bdi/default<br /> 0 /sys/kernel/debug/bdi<br /> 0 /sys/kernel/debug<br /> 0 /sys/kernel/ipv4<br /> 0 /sys/kernel/mm<br /> 0 /sys/kernel<br /> 0 /sys/power<br /> 0 /sys/module/kernel/parameters<br /> 0 /sys/module/kernel<br /> 0 /sys/module/fiq_debugger/parameters<br /> 0 /sys/module/fiq_debugger<br /> 0 /sys/module/printk/parameters<br /> 0 /sys/module/printk<br /> 0 /sys/module/wakelock/parameters<br /> 0 /sys/module/wakelock<br /> 0 /sys/module/userwakelock/parameters<br /> 0 /sys/module/userwakelock<br /> 0 /sys/module/earlysuspend/parameters<br /> 0 /sys/module/earlysuspend<br /> 0 /sys/module/spurious/parameters<br /> 0 /sys/module/spurious<br /> 0 /sys/module/yaffs/parameters<br /> 0 /sys/module/yaffs<br /> 0 /sys/module/s3cfb/parameters<br /> 0 /sys/module/s3cfb<br /> 0 /sys/module/keyboard/parameters<br /> 0 /sys/module/keyboard<br /> 0 /sys/module/vt/parameters<br /> 0 /sys/module/vt<br /> 0 /sys/module/pvrsrvkm/parameters<br /> 0 /sys/module/pvrsrvkm<br /> 0 /sys/module/scsi_mod/parameters<br /> 0 /sys/module/scsi_mod<br /> 0 /sys/module/sg/parameters<br /> 0 /sys/module/sg<br /> 0 /sys/module/onenand/parameters<br /> 0 /sys/module/onenand<br /> 0 /sys/module/u_ether/parameters<br /> 0 /sys/module/u_ether<br /> 0 /sys/module/mousedev/parameters<br /> 0 /sys/module/mousedev<br /> 0 /sys/module/alarm/parameters<br /> 0 /sys/module/alarm<br /> 0 /sys/module/alarm_dev/parameters<br /> 0 /sys/module/alarm_dev<br /> 0 /sys/module/tuner_xc2028/parameters<br /> 0 /sys/module/tuner_xc2028<br /> 0 /sys/module/tuner_simple/parameters<br /> 0 /sys/module/tuner_simple<br /> 0 /sys/module/mt20xx/parameters<br /> 0 /sys/module/mt20xx<br /> 0 /sys/module/tda8290/parameters<br /> 0 /sys/module/tda8290<br /> 0 /sys/module/tea5767/parameters<br /> 0 /sys/module/tea5767<br /> 0 /sys/module/tea5761/parameters<br /> 0 /sys/module/tea5761<br /> 0 /sys/module/tda9887/parameters<br /> 0 /sys/module/tda9887<br /> 0 /sys/module/xc5000/parameters<br /> 0 /sys/module/xc5000<br /> 0 /sys/module/v4l1_compat/parameters<br /> 0 /sys/module/v4l1_compat<br /> 0 /sys/module/hci_uart/parameters<br /> 0 /sys/module/hci_uart<br /> 0 /sys/module/mmc_core/parameters<br /> 0 /sys/module/mmc_core<br /> 0 /sys/module/sdhci/parameters<br /> 0 /sys/module/sdhci<br /> 0 /sys/module/binder/parameters<br /> 0 /sys/module/binder<br /> 0 /sys/module/lowmemorykiller/parameters<br /> 0 /sys/module/lowmemorykiller<br /> 0 /sys/module/snd/parameters<br /> 0 /sys/module/snd<br /> 0 /sys/module/snd_timer/parameters<br /> 0 /sys/module/snd_timer<br /> 0 /sys/module/snd_pcm/parameters<br /> 0 /sys/module/snd_pcm<br /> 0 /sys/module/sch_htb/parameters<br /> 0 /sys/module/sch_htb<br /> 0 /sys/module/nf_conntrack/parameters<br /> 0 /sys/module/nf_conntrack<br /> 0 /sys/module/nf_conntrack_amanda/parameters<br /> 0 /sys/module/nf_conntrack_amanda<br /> 0 /sys/module/nf_conntrack_ftp/parameters<br /> 0 /sys/module/nf_conntrack_ftp<br /> 0 /sys/module/nf_conntrack_h323/parameters<br /> 0 /sys/module/nf_conntrack_h323<br /> 0 /sys/module/nf_conntrack_irc/parameters<br /> 0 /sys/module/nf_conntrack_irc<br /> 0 /sys/module/nf_conntrack_netbios_ns/parameters<br /> 0 /sys/module/nf_conntrack_netbios_ns<br /> 0 /sys/module/nf_conntrack_sane/parameters<br /> 0 /sys/module/nf_conntrack_sane<br /> 0 /sys/module/nf_conntrack_sip/parameters<br /> 0 /sys/module/nf_conntrack_sip<br /> 0 /sys/module/nf_conntrack_tftp/parameters<br /> 0 /sys/module/nf_conntrack_tftp<br /> 0 /sys/module/nf_conntrack_ipv4/parameters<br /> 0 /sys/module/nf_conntrack_ipv4<br /> 0 /sys/module/tcp_cubic/parameters<br /> 0 /sys/module/tcp_cubic<br /> 0 /sys/module/ipv6/parameters<br /> 0 /sys/module/ipv6<br /> 0 /sys/module/l2cap/parameters<br /> 0 /sys/module/l2cap<br /> 0 /sys/module/sco/parameters<br /> 0 /sys/module/sco<br /> 0 /sys/module/rfcomm/parameters<br /> 0 /sys/module/rfcomm<br /> 0 /sys/module/rfkill/parameters<br /> 0 /sys/module/rfkill<br /> 0 /sys/module<br /> 0 /sys/block<br /> 0 /sys/</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T12:01:03Z

<p>Steventroughtonsmith: /* Nexus S */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:DSC00579.jpg|400px]]<br /> [[File:nexuss.jpg|400px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> * Screen brightness<br /> <br /> == What does<br /> n't work ==<br /> <br /> * Touchscreen<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> == Screen brightness ==<br /> Will add this to a newer kickstart, but for the time being, you can bring the brightness to full by doing:<br /> <br /> * echo 255 &gt; /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/brightness<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]<br /> <br /> == Team members ==<br /> <br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/File:DSC00579.jpg 2011-01-10T11:58:54Z

<p>Steventroughtonsmith: Nexus S bad gamma</p> <hr /> <div>Nexus S bad gamma</div>

Steventroughtonsmith http://wiki.meego.com/ARM/MSMQSD 2011-01-10T10:51:40Z

<p>Steventroughtonsmith: /* Team members */</p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == HTC HD2 ==<br /> <br /> [[File:DSC00533.jpg|800px]]<br /> <br /> === Instructions ===<br /> <br /> The rootfs is built similarly to the Nexus One image, but the built ext2 image is copied as a file to the SD card and booted using magldr or haret; no flashing needed.<br /> <br /> Kickstart, prebuilt image, and more info forthcoming!<br /> <br /> === What works ===<br /> <br /> * Touchscreen<br /> * WiFi<br /> * ADB (Android Debug Bridge)<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Related Wiki Pages ==<br /> <br /> [[ARM/Hummingbird| MeeGo on ARM/Hummingbird]]<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T10:51:34Z

<p>Steventroughtonsmith: /* Team members */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]<br /> <br /> == Team members ==<br /> <br /> * Steven Troughton-Smith / steventroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T10:51:15Z

<p>Steventroughtonsmith: /* Related Wiki Pages */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]<br /> <br /> == Team members ==<br /> <br /> * Steven Troughton-Smith / stroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/MSMQSD 2011-01-10T10:50:09Z

<p>Steventroughtonsmith: /* Related Wiki Pages */</p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == HTC HD2 ==<br /> <br /> [[File:DSC00533.jpg|800px]]<br /> <br /> === Instructions ===<br /> <br /> The rootfs is built similarly to the Nexus One image, but the built ext2 image is copied as a file to the SD card and booted using magldr or haret; no flashing needed.<br /> <br /> Kickstart, prebuilt image, and more info forthcoming!<br /> <br /> === What works ===<br /> <br /> * Touchscreen<br /> * WiFi<br /> * ADB (Android Debug Bridge)<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Related Wiki Pages ==<br /> <br /> [[ARM/Hummingbird| MeeGo on ARM/Hummingbird]]<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / stroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T10:49:40Z

<p>Steventroughtonsmith: /* Related Wiki Pages */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!<br /> <br /> = Related Wiki Pages =<br /> <br /> [[ARM/MSMQSD| MeeGo on ARM/Snapdragon (MSM/QSD)]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM 2011-01-10T10:47:43Z

<p>Steventroughtonsmith: Added link to Hummingbird page</p> <hr /> <div>The situation between MeeGo and the ARM community is quite peculiar currently. The role of Intel awakes a predictable suspicion but at the same time many ARM stakeholders are increasingly involved in MeeGo related activities. The mobile focus combined with the multiple form factors targeted and the open setup make MeeGo a very interesting proposition for chipset vendors in the ARM community and device vendors shipping ARM based products.<br /> <br /> == Highlights ==<br /> * The MeeGo project is committed to support Intel/Atom and ARM architectures. Decisions on roadmapping, architecture and development take this requirement into account.<br /> * The [http://meego.com/about/governance/release-engineering Release Engineering team] has specific roles for ARM related activities. Risto Lankinen is responsible for maintaining the ARM architecture-specific toolchain and libraries in MeeGo. [http://meego.com/users/harrihakulinen Harri Hakulinen] is responsible for maintaining MeeGo releases on the Nokia N900 hardware platform.<br /> * #meego-arm is the MeeGo ARM team IRC channel as well as home to the MeeGo N900 hardware adaptation team.<br /> * The Nokia N900 (TI OMAP3) is an official hardware platform of the MeeGo project. See [[ARM/N900]].<br /> * Texas Instruments is Platinum sponsor at the [http://conference2010.meego.com MeeGo Conference] and technology demonstrations exist showing MeeGo running in OMAP4.<br /> ** 2010-10-27 [http://blogs.forbes.com/elizabethwoyke/2010/10/27/ti-views-tablets-meego-windows-phone-7-as-big-opportunity/ TI Views Tablets, MeeGo, Windows Phone 7 As ‘Big Opportunity’] (Forbes)<br /> ** 2010-10-27 TI's OMAP4 Panda board project officially launched including a MeeGo support project: http://pandaboard.org/<br /> * ST-Ericsson presented at the MeeGo Conference a session about [http://conference2010.meego.com/session/st-ericsson-u8500-linaro-and-meego ST-Ericsson U8500 Linaro and MeeGo].<br /> * An [[MeeGo Conference 2010/Unconference/ARM|ARM BoF]] is planned at the MeeGo Conference.<br /> * Proof points of MeeGo running on ARM based platforms are popping up. Some of them are R&amp;D initiatives of the vendors, some other are personal initiatives: [[ARM/MSMQSD|MSM/QSD]], [[ARM/Meego_on_Beagleboard_from_scratch|Beagleboard]]...<br /> * Linaro [https://wiki.linaro.org/Platform/UserPlatforms/Heads/Meego experiments] with MeeGo support.<br /> <br /> == Running MeeGo on ARM ==<br /> <br /> ''(((Please group the initiatives below by Vendor/Chipset)))''<br /> <br /> Information on how to use MeeGo on ARM-based devices and contacts to the teams working on it.<br /> <br /> === Nokia N900 ===<br /> [[ARM/N900|The Nokia N900 hardware adaptation team]], team lead: Harri Hakulinen (IRC: harha)<br /> <br /> === Nokia N8x0 (Unofficial) ===<br /> [[ARM/N8x0|Unofficial Nokia N8x0 hardware adaptation team]], run by maemo.org<br /> <br /> === MSM/QSD (Unofficial) ===<br /> [[ARM/MSMQSD|Unofficial MSM/QSD hardware adaptation]]<br /> <br /> === Hummingbird (Unofficial) ===<br /> [[ARM/Hummingbird|Unofficial Hummingbird hardware adaptation]]<br /> <br /> === Archos Internet Tablets (Unofficial) ===<br /> * [http://codex.xiaoka.com/wiki/meego:archos Archos Gen7] port<br /> <br /> === Qemu ===<br /> <br /> [[ARM/Meego_on_Qemu|QEMU instructions]]<br /> <br /> Qemu allows you to try out MeeGo safely on your Desktop PC.<br /> <br /> === Beagleboard ===<br /> *[[ARM/Meego_on_Beagleboard_from_scratch|Meego on Beagleboard from scratch]]<br /> *[[ARM/Meego_IVI_on_Beagle| MeeGo IVI on the Beagleboard]]<br /> *[[ARM/Meego_on_the_Beagle|Demo image from Linux Foundation]]<br /> <br /> === OMAP4 ===<br /> * [[ARM/OMAP4 Panda|OMAP 4 Panda documentation]]<br /> * [[ARM/OMAP4_Panda|MeeGo on OMAP4 Pandaboard]] ([http://www.slideshare.net/menonnishanth/meego presentation])<br /> * [[ARM/OMAP4_Blaze|MeeGo on OMAP4 Blaze]] ([http://www.youtube.com/watch?v=S20k1mvL8d0 video])<br /> <br /> === Renesas ===<br /> * [http://www.youtube.com/watch?feature=player_embedded&amp;v=xuNOweDXh3Q Video] from [http://nomovok.com/ Nomovok] demonstrating MeeGo Core OS and an own tablet-like UX running on top of [http://www.renesas.com/prod/assp/mobile/ap4.html Renesas HS-Mobile AP4] <br /> <br /> === Freescale ===<br /> * [http://www.youtube.com/watch?feature=player_embedded&amp;v=osDlTdl5lAk Video] from [http://nomovok.com/ Nomovok] demonstrating MeeGo Core OS and an own tablet-like UX running on top of [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCIMX51EVKJ Freescale i.MX51]<br /> <br /> === Tegra 2 (Unofficial) ===<br /> [[ARM/TEGRA2|Unofficial Tegra 2 hardware adaptation]]<br /> <br /> == Engaging the ARM community ==<br /> According to the [[Community_Office/Marketing|marketing strategy]], it is crucial for MeeGo to be a neutral platform. This implies the engagement of chipset vendors other than Intel and device manufacturers other than Nokia. The link between this goal and the ARM community is obvious.<br /> <br /> How to improve the current situation? List your ideas below and get involved to make them happen. Proposals and discussions about this topic are welcome at the [http://lists.meego.com/listinfo/meego-community meego-community] mailing list.<br /> <br /> # Highlight the MeeGo/ARM related projects and news in one place (this page?). Currently it's hard to follow.--[[User:Qgil|Qgil]] 17:05, 1 October 2010 (UTC)<br /> # Get ARM stakeholders directly involved in the MeeGo project to start accruing merits.--[[User:Qgil|Qgil]] 17:05, 1 October 2010 (UTC)<br /> # Invite and highlight the participation of ARM related topics and speakers in MeeGo events (happening already, more needed).--[[User:Qgil|Qgil]] 17:05, 1 October 2010 (UTC)<br /> # Get MeeGo speakers in ARM related events, from the ARM community and its stakeholders (proposals?).--[[User:Qgil|Qgil]] 17:05, 1 October 2010 (UTC)<br /> # Offer the participation in MeeGo working groups to companies involved in MeeGo products.--[[User:Qgil|Qgil]] 17:05, 1 October 2010 (UTC)<br /> # Get ARM development products into the hands of MeeGo developers free or at discount! See http://forum.meego.com/showthread.php?p=14202 --[[User:Texrat|Texrat]] 19:44, 1 December 2010 (UTC)<br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:35:59Z

<p>Steventroughtonsmith: /* Nexus S (Samsung Hummingbird + SGX 540) */</p> <hr /> <div>= Nexus S =<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!<br /> <br /> = Related Wiki Pages =<br /> <br /> [http://wiki.meego.com/ARM/MSMQSD MeeGo on ARM/Snapdragon (MSM/QSD)]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:35:20Z

<p>Steventroughtonsmith: </p> <hr /> <div>= Nexus S (Samsung Hummingbird + SGX 540) =<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!<br /> <br /> = Related Wiki Pages =<br /> <br /> [http://wiki.meego.com/ARM/MSMQSD MeeGo on ARM/Snapdragon (MSM/QSD)]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/MSMQSD 2011-01-10T09:34:32Z

<p>Steventroughtonsmith: </p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == HTC HD2 ==<br /> <br /> [[File:DSC00533.jpg|800px]]<br /> <br /> === Instructions ===<br /> <br /> The rootfs is built similarly to the Nexus One image, but the built ext2 image is copied as a file to the SD card and booted using magldr or haret; no flashing needed.<br /> <br /> Kickstart, prebuilt image, and more info forthcoming!<br /> <br /> === What works ===<br /> <br /> * Touchscreen<br /> * WiFi<br /> * ADB (Android Debug Bridge)<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Related Wiki Pages ==<br /> <br /> [http://wiki.meego.com/ARM/Hummingbird MeeGo on ARM/Hummingbird]<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / stroughtonsmith<br /> * your name here<br /> <br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:32:40Z

<p>Steventroughtonsmith: /* Nexus S (Samsung Hummingbird + SGX 540) */</p> <hr /> <div>== Nexus S (Samsung Hummingbird + SGX 540) ==<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> == What works ==<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> == What doesn't work ==<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> == Build ==<br /> *Use the procedure here to generate an ext2 image, and copy it to linux/rootfs.ext2 on the internal memory of the Nexus S. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> == Kernel ==<br /> <br /> My kernel is Samsung stock; you will need to modify it to get X11 to run:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:25:53Z

<p>Steventroughtonsmith: Clarity</p> <hr /> <div>== Nexus S (Samsung Hummingbird + SGX 540) ==<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> What works:<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> What doesn't work currently:<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> If you've never built a MeeGo rootfs before, it's relatively straightforward, and all the binaries are precompiled for you (but it's definitely for developers only).<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> My kernel is Samsung stock:<br /> <br /> * git://android.git.kernel.org/kernel/samsung.git<br /> * make herring_defconfig<br /> <br /> The only change was modifying the .config file to turn on CONFIG_VT (needed for X11, unless we [http://code.google.com/p/savory/source/browse/trunk/x11-on-kindle/xorg-1.6.patch?r=14 recompile X11 without VT support]).<br /> <br /> Go nuts!</div>

Steventroughtonsmith http://wiki.meego.com/ARM/MSMQSD 2011-01-10T09:22:38Z

<p>Steventroughtonsmith: Initial HD2 additions</p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == HTC HD2 ==<br /> <br /> [[File:DSC00533.jpg|800px]]<br /> <br /> === Instructions ===<br /> <br /> The rootfs is built similarly to the Nexus One image, but the built ext2 image is copied as a file to the SD card and booted using magldr or haret; no flashing needed.<br /> <br /> Kickstart, prebuilt image, and more info forthcoming!<br /> <br /> === What works ===<br /> <br /> * Touchscreen<br /> * WiFi<br /> * ADB (Android Debug Bridge)<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / stroughtonsmith<br /> * your name here<br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/File:DSC00533.jpg 2011-01-10T09:17:55Z

<p>Steventroughtonsmith: MeeGo 1.1 Release on HTC HD2</p> <hr /> <div>MeeGo 1.1 Release on HTC HD2</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:14:26Z

<p>Steventroughtonsmith: /* Nexus S (Samsung Hummingbird + SGX 540) */</p> <hr /> <div>== Nexus S (Samsung Hummingbird + SGX 540) ==<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> What works:<br /> <br /> * ADB root shell<br /> * X11 &amp; UI apps<br /> <br /> What doesn't work currently:<br /> <br /> * Touchscreen<br /> * Super-AMOLED brightness control (screen looks near pitch black)<br /> * WiFi<br /> * Anything else :-P<br /> <br /> If you've never built a MeeGo rootfs before, it's relatively straightforward, and all the binaries are precompiled for you (but it's definitely for developers only).<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> My kernel is stock git://android.git.kernel.org/kernel/samsung.git ; make herring_defconfig; the only change was modifying the .config to turn on CONFIG_VT (needed for X11).<br /> <br /> Go nuts!</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Various 2011-01-10T09:13:56Z

<p>Steventroughtonsmith: Modified page to include links to the MSM/QSD and Hummingbird pages</p> <hr /> <div>= ARM Portal =<br /> <br /> This page is meant to serve as a portal for running MeeGo on ARM processors. It will have links to other resources to help users and developers get their software working with MeeGo.<br /> <br /> = OMAP3 =<br /> <br /> [http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch MeeGo on the Beagleboard from scratch]&lt;br&gt;<br /> [http://wiki.meego.com/ARM/Meego_IVI_on_Beagle MeeGo IVI on the Beagleboard]<br /> <br /> = Snapdragon (MSM/QSD) =<br /> <br /> [http://wiki.meego.com/ARM/MSMQSD MeeGo on Snapdragon (MSM/QSD) devices]<br /> <br /> = Hummingbird =<br /> <br /> [http://wiki.meego.com/ARM/Hummingbird MeeGo on Hummingbird devices]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/MSMQSD 2011-01-10T09:10:42Z

<p>Steventroughtonsmith: Added my name to the page</p> <hr /> <div>'''This area is under construction'''<br /> <br /> = MSM/QSD hardware adaptation =<br /> <br /> [[File:nexus3.jpg|800px]]<br /> [[File:meego-handset-nexusone-portrait.jpg]]<br /> <br /> This page was inspired by this link http://www.android-devs.com/?p=152 which has instructions to run Debian natively on the Google Nexus One handset. With a number of vendors shipping kernel source with MSM/QSD hardware this gives the possibility of running MeeGo on these platforms. As usual open drivers will be key to success.<br /> <br /> This port is not a work in progress and not meant for end user installation. The following details are for MSM/QSD porting effort and no end user images are available.<br /> <br /> See details of how to start developing for your device here, http://android.modaco.com/category/363/device-specific/<br /> <br /> vgrade / mitsutaka<br /> <br /> == Nexus One ==<br /> <br /> [[ARM/MSMQSD/Initial Work|Initial Port]]<br /> <br /> === basic msm_fb with mesa ===<br /> <br /> For latest 1.1 kickstart see below http://wiki.meego.com/ARM/MSMQSD#MeeGo_1.1 for latest kickstart file for nexus 1<br /> <br /> The picture above was taken with the 18.09.10 daily trunk handset UX, mesa packages added to provide swrast-DRI, ELG and GLESv2.<br /> Kernel is a stock google 2.6.32 msm kernel. Touch is working but needs rotating.<br /> <br /> *Kickstart is here http://dl.dropbox.com/u/5715485/meego/handset-armv7l-nexus.ks<br /> **Use the procedure here to generate the image, mount it and then write to sdcard. http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Build_the_rootfs<br /> *Other kickstart is here [[Media:Meego-handset-armv7l-nexusone-trunk.ks]]<br /> ** Portrait default screen<br /> *zImage is here http://dl.dropbox.com/u/5715485/meego/zImage<br /> *uxlaunch is here http://dl.dropbox.com/u/5715485/meego/uxlaunch<br /> *Xorg config is here http://dl.dropbox.com/u/5715485/meego/90-nexus-msmfb.conf<br /> *fstab is here http://dl.dropbox.com/u/5715485/meego/fstab<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> WARNING : First boot can take up to 5 mins, second boot should be around 75 seconds<br /> <br /> WARNING : UI is not hardware accelerated so don't expect the full user experience<br /> <br /> === libEGL and libGLESv2 ===<br /> <br /> As we know vanilla X and software GLES works but we need hardware libEGL and libGLESv2 for better performance.<br /> <br /> I pulled libEGL.so, libGLESv2.so and libGLESv1_CM.so from my Nexus /system/lib along with the supporting /system/lib/egl files lib***_adreno200.so as the system/lib files are just stubs into the lib/egl files.<br /> <br /> After booting .xsession_errors reported liblog.so not found when loading mcompositor. pulled that from Nexus.<br /> <br /> libcutils.so was not found next then 'libc.so ELF version does not match current version' was reported. The libc.so in /usr/lib was a pointer to /lib so I just copied the /lib file to /usr/lib.<br /> <br /> Now libutils.so and libz.so were not found and were pulled from the nexus.<br /> <br /> Now here is the kicker, 'undefined Symbol __sF' in libc.<br /> <br /> This is because the Android libs I pulled have been built with Bionic libc and I cannot use that as that would break the rest of MeeGo.<br /> <br /> So the question is can we arrange for bionic and glibc to coexist or is this the end of the road?<br /> <br /> After talking to a few guys on xda I think this avenue is closed - unless you know better. http://forum.xda-developers.com/showthread.php?t=764255&amp;page=6<br /> <br /> === i.MX51 GLES ===<br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics, it seems the mx51 has the same GPU<br /> <br /> using libEGL.so and libGLESv2.so from amd-gpu-x11-bin-mx51-10.07.11.tar.gz<br /> # ln -s kgsl-3d0 /dev/gsl_kmod<br /> # cp /mnt/system/etc/firmware/yamato_*.fw /lib/firmware/<br /> I got:<br /> [ 3337.720503] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw<br /> [ 3337.727660] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw<br /> [ 3337.733807] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off<br /> [ 3337.734894] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> [ 3337.735707] kgsl kgsl: |kgsl_yamato_ioctl| invalid ioctl code 4008f920<br /> <br /> So, apparently MSM KGSL device is not compatible with AMD GSL device on ioctl level.<br /> (smoku)<br /> <br /> The linux-2.6.31 kernel source tree for i.MX51 has drivers/mxc/amd-gpu directory. But it only provides base gpu.ko driver. The package amd-gpu-x11-bin-mx51 on i.MX51 Ubuntu image has two additional modules in extra: gsl.ko and gpu_z430.ko, which I cannot find source for. (smoku)<br /> <br /> === code Aurora x86-video-msm ===<br /> <br /> * kernel driver - https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=tree;f=drivers/gpu/msm;h=dcacc55d835348f71454784c0e32b819424af4be;hb=refs/heads/android-msm-2.6.32<br /> * userspace driver - https://www.codeaurora.org/contribute/projects/xwinp/<br /> ** compiled for MeeGo Current - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/xorg-x11-drv-msm-1.1.0-1.1.armv7l.rpm<br /> ** xorg.conf - http://pastebin.com/V6J5CJJ0<br /> <br /> <br /> Just had this email in from Jordan Crouse at code Auroroa when I asked if the drivers above were the best to use on the Nexus :(<br /> <br /> You have the correct X driver and kernel driver. That should give you some limited blit acceleration on on the Nexus One for 2D rendering.<br /> Unfortunately, the parts you really need are the proprietary 3D drivers, and those are not available anywhere. Without those, you'll be stuck<br /> with software 3D for the long haul. Sorry.<br /> Jordan<br /> <br /> Such a shame (vgrade)<br /> <br /> === MeeGo 1.1 ===<br /> <br /> Mitsutaka has provided detailed instructions to get MeeGo 1.1 up on the Nexus<br /> <br /> Part1: Boot from PC.<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-and-how-to.html<br /> Part2: Boot from flash memory. Dual boot MeeGo and Android<br /> http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html<br /> Screen shot<br /> http://3.bp.blogspot.com/_FMegAOwlg0k/TNEYE7a8SsI/AAAAAAAAAd4/1S2LH5Kl5I0/s1600/IMG_0263.JPG<br /> kickstart file: [[File:meego-handset-armv7l-nexusone-1.1.ks]]<br /> <br /> captaingloo reported an error with this ks, he replace the failing ref with -<br /> <br /> http://repo.meego.com/MeeGo/updates/1.1/core/repos/armv7el/packages//repodata/repomd.xml<br /> <br /> see http://bugs.meego.com/show_bug.cgi?id=10875<br /> <br /> == Dell Streak ==<br /> <br /> From smoku on #meego-arm<br /> <br /> http://www.youtube.com/watch?v=_P8Oa6go2Hk<br /> <br /> === Releases ===<br /> Current status of the port: http://codex.xiaoka.com/wiki/streak:meego<br /> <br /> You will find snapshot releases and installation instruction here: http://codex.xiaoka.com/pub/meego/streak/<br /> <br /> === Kernel ===<br /> * Streak Kernel Release from Dell - http://opensource.dell.com/releases/streak/<br /> * Kernel fixed for building for normal Linux distribution - http://gitorious.org/streak/kernel<br /> * kernel-streak RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/<br /> <br /> * kernel porting and image building guide: http://codex.xiaoka.com/wiki/streak:kernel_porting<br /> <br /> === MSM XOrg driver ===<br /> * MSM framebuffer driver is not working with X.Org fbdev driver. (Needs kernel thread patch to flush framebuffer data to display)<br /> * MSM X.Org driver<br /> ** xorg-x11-drv-msm RPM package - http://repo.pub.meego.com/home:/smoku:/streak/MeeGo_current_Core_standard/armv7l/<br /> <br /> === BlueTooth ===<br /> Qualcomm BTS BlueTooth device is connected using USB UART which device is accessible as /dev/ttyS1. It requires firmware to be loaded before using. The hciattach [http://www.spinics.net/lists/linux-bluetooth/msg07241.html was theoretically patched] to allow Qualcomm firmware loading. But it does not work on Streak. The hciattach just timeouts.<br /> <br /> # modprobe hci_uart<br /> # hciattach ttyS1 qualcomm<br /> <br /> == HTC Desire ==<br /> <br /> Using a modified version of the N900 Acceptance Image.<br /> *Charging works (and the charging symbol moves), Battery Status doesn't show though when the charger is out.<br /> *adbd works<br /> <br /> http://www.youtube.com/watch?v=GtnfHNjcdzg<br /> <br /> -Termana<br /> <br /> [[File:HTCDesire-Initial.jpg|400px]]<br /> <br /> === GPRS ===<br /> '''''Note: This procedure should work for all MSM and QSD based devices, HOWEVER I have only tested it on the Desire - Termana'''''<br /> <br /> The Desire's modem can be communicated with through two dev nodes - /dev/smd0 and /dev/qmi0.<br /> <br /> /dev/smd0 is the main part and communicates using AT commands plus additional proprietary non-standard Qualcomm AT commands.<br /> <br /> /dev/qmi0 is the second part and it communicates using a proprietary Qualcomm protocol.<br /> <br /> Replace /etc/ofono/modem.conf with this: http://dl.dropbox.com/u/13630837/modem.conf<br /> <br /> Then you can use the following commands to bring up a data connection on MeeGo:<br /> <br /> echo -e &quot;AT+CGDCONT=1,\&quot;IP\&quot;,\&quot;APNHERE\&quot;,\&quot;\&quot;,0,0\r&quot; &gt; /dev/smd0<br /> <br /> echo -e 'ATD*99***1#\r' &gt; /dev/smd0<br /> <br /> echo -n 'up:APNHERE &quot;&quot; &quot;&quot;' &gt; /dev/qmi0<br /> <br /> dhclient rmnet0<br /> <br /> === HTC Desire Meego 1.1 WIP ===<br /> <br /> These instructions were posted by captainigloo on IRC 07/08-12-10<br /> <br /> Additionnal note to boot Meego on the HTC desire<br /> <br /> 1 - Kernel.<br /> I use the official HTC kernel from here : http://developer.htc.com/<br /> named HTC Desire - Froyo MR - 2.6.32 kernel source code.<br /> <br /> To build the kernel :<br /> <br /> cd bravo-2.6.32-gd96f2c0/<br /> make bravo_defconfig<br /> <br /> I change some options as reported on this wiki :<br /> <br /> make menuconfig<br /> General Setup-&gt;remove Initial RAM filesystem<br /> Device Driver-&gt;Character Devices-&gt; Set Virtual Terminal<br /> Device Driver-&gt;Graphics support-&gt;Console display driver support-&gt;Remove VGA Text console<br /> <br /> export ARCH=arm<br /> export CROSS_COMPILE=arm-angstrom-linux-gnueabi-<br /> make<br /> <br /> here I use the toolchain build with angstrom for the Cortex A8, Meego should provide its own toolchain, but i don't know anything about it.<br /> <br /> copy zImage generated in the parent directory :<br /> <br /> cp arch/arm/boot/zImage ../<br /> <br /> Install modules and firmware in the top directory.<br /> <br /> make modules_install INSTALL_MOD_PATH=../modules<br /> make firmware_install INSTALL_FW_PATH=../firmware<br /> <br /> This files have to be copied in the rootfs.<br /> <br /> 2 - rootfs<br /> <br /> I use a modified image of the NEXUS One. that you can find here : &lt;&gt;<br /> <br /> I build the rootfs with mic-image-creator :<br /> <br /> sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=handset-armv7l-nexus.ks<br /> <br /> 3 - SDcard<br /> <br /> Create a ext3 partition on your sdcard called rootfs<br /> <br /> cd /media/rootfs<br /> tar zxvf meego-Meego-handset-armv7l-nexusone-1.1-1.1.20101206.1441-rootfs.tar.gz<br /> <br /> Then copied the modules and firmware :<br /> <br /> cp -a modules/lib/ /media/rootfs/<br /> cp -a firmware/* /media/rootfs/lib/firmware/<br /> <br /> 4 - Boot<br /> <br /> To boot the desire it must be S-Off, you can unlock it with alpharev (http://alpharev.nl/)<br /> To boot the kernel you need fastboot (http://developer.htc.com/adp.html)<br /> <br /> insert your sdcard in the Desire, boot it in fastboot mode (Power + back button) plugg the USB cable and launch the command :<br /> <br /> sudo ./fastboot -c 'root=/dev/mmcblk0p1 rw rootfs=ext3 init=/sbin/init rootwait noinitrd' boot zImage<br /> <br /> Wait a long time, and after a moment the Meego UI should appear.<br /> Don't except something working perfectly, for me it just start the UI and nothing more, no touchscreen, no status icons...<br /> <br /> /var/log/messages - http://pastebin.fr/9726<br /> <br /> == Collaboration spaces ==<br /> <br /> * #meego-arm on irc.freenode.net, this channel is for development effort not a support channel <br /> * #htc-linux on irc freenode<br /> <br /> == Assets in hardware adaptation ==<br /> <br /> https://www.codeaurora.org/contribute/projects/xwinp/<br /> <br /> http://htc-linux.org/wiki/index.php?title=Msm_Serial<br /> <br /> http://htc-linux.org/wiki/index.php?title=Main_Page<br /> <br /> http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/318064/using-rs232-on-the-pulse/<br /> <br /> http://www.imxdev.org/wiki/index.php?title=All_Boards_3D_Graphics<br /> <br /> http://gitorious.org/linux-on-qualcomm-s-msm<br /> <br /> == Team members ==<br /> <br /> * Martin Brook / vgrade<br /> * Mitsutaka Amano / mitsutaka<br /> * Tomasz Sterna / smoku<br /> * Bradley Smith / Termana<br /> * Steven Troughton-Smith / stroughtonsmith<br /> * your name here<br /> <br /> [[Category:Hardware]]</div>

Steventroughtonsmith http://wiki.meego.com/ARM/Hummingbird 2011-01-10T09:09:57Z

<p>Steventroughtonsmith: Initial Nexus S port info</p> <hr /> <div>== Nexus S (Samsung Hummingbird + SGX 540) ==<br /> <br /> [[File:nexuss.jpg|800px]]<br /> <br /> So, I have a barebones version of MeeGo (barely) running on the Nexus S. I can't really do much with it on my own, but I'm posting the info here so you can build it and try it for yourself.<br /> <br /> What works:<br /> <br /> • ADB root shell<br /> • X11 &amp; UI apps<br /> <br /> What doesn't work currently:<br /> <br /> • Touchscreen<br /> • Super-AMOLED brightness control (screen looks near pitch black)<br /> • WiFi<br /> • Anything else :-P<br /> <br /> If you've never built a MeeGo rootfs before, it's relatively straightforward, and all the binaries are precompiled for you (but it's definitely for developers only).<br /> <br /> I have my boot.img (kernel + ramdisk) and a MeeGo kickstart file at http://blog.steventroughtonsmith.com/2011/01/nexus-s-meego.html; you can use fastboot to boot the image, or flash it to the recovery partition to dual boot. The actual MeeGo rootfs is run from a rootfs.ext2 file you can drop onto the Nexus S using Mass Storage mode - no need for messy flashing or the like, you can thank me later).<br /> <br /> There's not much else I can do on my own right now, so if you want to see anything become of this do get involved!<br /> <br /> My kernel is stock git://android.git.kernel.org/kernel/samsung.git ; make herring_defconfig; the only change was modifying the .config to turn on CONFIG_VT (needed for X11).<br /> <br /> Go nuts!</div>

Steventroughtonsmith